2 days of work in prep for Dyno.... Dyno Sheet and Video. - TriStateTuners.com :: Home of Tristate Auto Enthusiast

Lil Shoaf · 04-17-2009, 07:36 PM

As the title says I've spent the past (2) days preping Phobos (my WRX) for an upcomming dyno day.. There were several things besides the typical fluid changes and what not.. Well after dinner I got bored since my wife is off to work so I gave the car a quick wash so I can give her a good polish tomorrow so she looks as best as she can on the dyno. I'll post those shots and a video latter.. Ignore the Dents and other signs of Age.... LOL..

2000MRDC2 · 04-17-2009, 07:47 PM

looks good, the intake mani is sexy, what turbo u running? and what do u expect it to make?

dudewheresmycar · 04-17-2009, 07:54 PM

looks sexy

Lil Shoaf · 04-17-2009, 09:54 PM

Quote:

Originally Posted by 2000MRDC2

looks good, the intake mani is sexy, what turbo u running? and what do u expect it to make?

I have a GT35R with a .86 hot side in there currently. I already put down 425/360 but I added a few things to free up the restricted air flow which killed my TQ numbers.. I should be 450/405ish with the non "Push It" tune that I'm on. I still have a lot to play with in my tune but I'm not up for that yet..

slow_spool · 04-17-2009, 10:12 PM

Quote:

Originally Posted by Lil Shoaf

I have a GT35R with a .86 hot side in there currently. I already put down 425/360 but I added a few things to free up the restricted air flow which killed my TQ numbers.. I should be 450/405ish with the non "Push It" tune that I'm on. I still have a lot to play with in my tune but I'm not up for that yet..

whats done internally?

Lil Shoaf · 04-18-2009, 04:23 PM

Quote:

Originally Posted by slow_spool

whats done internally?

LOL. Everything. The bottom end is fully forged and ballanced to 10,000rpms. It's also sleeved with Darton Ductle Iron sleeves.

The heads are fully ported and polished with over sized valves and Kelford cams, Dual springs, Titanium retainers, ect...

To put that power down I'm running a Full PPG dog box with all upgrades and PPG front LSD coupled with Kaaz Rear LSD (the PPG unit was not ready in time)..

The motor is good to much more power then I ever plan to run..

slow_spool · 04-18-2009, 10:14 PM

Quote:

Originally Posted by Lil Shoaf

LOL. Everything. The bottom end is fully forged and ballanced to 10,000rpms. It's also sleeved with Darton Ductle Iron sleeves.

The heads are fully ported and polished with over sized valves and Kelford cams, Dual springs, Titanium retainers, ect...

To put that power down I'm running a Full PPG dog box with all upgrades and PPG front LSD coupled with Kaaz Rear LSD (the PPG unit was not ready in time)..

The motor is good to much more power then I ever plan to run..

Nice mod list!

do you like the ppg dog box tranny so far?

**TROLL** · 04-18-2009, 10:21 PM

sounds serious... are you retuning or just getting it back on the dyno for some pulls?

Lil Shoaf · 04-19-2009, 10:46 PM

Tomorrow is the BIG day.. I can't wait for that Mustang Dyno to break my heart..

Quote:

Originally Posted by TROLL

sounds serious... are you retuning or just getting it back on the dyno for some pulls?

I did (2) differenet road tunes and now I'm planning on running some pulls but will do a little tuning if I find anything that I don't like..

Quote:

Originally Posted by slow_spool

Nice mod list!

do you like the ppg dog box tranny so far?

I love the PPGs.. The whine can be intense at times for passengers but I love it.. It funny when people tell you that there is some thing wrong with your car because they can hear it whining...

SupraMr2 · 04-19-2009, 11:05 PM

^I wise I can have a PPG box. 5 or 6 speed?
Nice build!

Lil Shoaf · 04-20-2009, 07:42 AM

Quote:

Originally Posted by SupraMr2

^I wise I can have a PPG box. 5 or 6 speed?
Nice build!

I'm running the 5 speed setup. 1-4 full dog with upgraded oem style 5th. I love the PPGs. I went all out on that transmission and purchased everything that Andrew (andrewtechautomotive) offered..

856jersey · 04-20-2009, 05:30 PM

Red horns <3. Good luck on the dyno dude.

97TurboDSM · 04-20-2009, 05:53 PM

so today was the day. numbers please.

Lil Shoaf · 04-21-2009, 02:32 PM

Well, after a 9 hour trip both ways I am finally home and had a great time.

We spent all day at the shop which was pretty nice. I was able to squeeze (2) runs in on the dyno. We did no additional tuning just runs. We didn't log boost either to save time.. I'll post a link to the video once I edit it and host it up.. OK.. Now the number..

They use a Mustang MD-AWD-500-Euro chassis dynamometer at an elevation of 243' according to my GPS unit.

I put down 441whp and 375lbtq. I have to wait for ECS Performance to email my graph as they didn't have a printer hooked up to the dyno yet. I'll post it as soon as I get it.. The car hit boost hard and held 375lbtq almost to redline. It had a strong flat TQ curve..

My previous dyno was 425whp and 360lbtq on a DynaJet which most argue is 10-15% higher then a Mustang. I figure the FMIC, Magnus Intake Manifold, Header, and Jethot piping added some decent power.. If calculated the old numbers would be about..

380whp and 330lbtq VS 441whp and 375lbtq.. I'm happy with the added power.. I put down the highest numbers on their dyno to date..

http://www.eastcoastswappers.com/index.php

jjm4life · 04-21-2009, 06:00 PM

wait let me get this straightl.. you traveled 9hrs round trip for 2 dyno runs and no tuning... wow thats dedication to a shop.

great numbers though. must be a beast

Lil Shoaf · 04-21-2009, 06:10 PM

Quote:

Originally Posted by jjm4life

wait let me get this straightl.. you traveled 9hrs round trip for 2 dyno runs and no tuning... wow thats dedication to a shop.

great numbers though. must be a beast

LOl, well not really. Matt from 555 motorsports came to my area for a local tuning event and he talked me into heading out to ECS with him.. It was a 9 hour trip EACH way. It was more keeping Matt company and getting away for a day or two.

It is a beast and a blast to drive...

Lil Shoaf · 04-21-2009, 06:38 PM

EWG Dump marked up the Dyno a little bit..

btyler19877 · 04-22-2009, 03:42 PM

niceeeee

Lil Shoaf · 04-25-2009, 12:03 AM

Proven · 04-25-2009, 01:38 AM

SO nice, Def. in love with your #'s and engine / tranny build!!!

Still a 2.0L ?

04-17-2009, 07:36 PM	#1
Lil Shoaf Tri-State Training Wheels Join Date: Feb 2009 Location: Koppel Pa Member #10860 My Ride: 2002 Subaru WRX - Phobos iTrader: (0)	2 days of work in prep for Dyno.... Dyno Sheet and Video. As the title says I've spent the past (2) days preping Phobos (my WRX) for an upcomming dyno day.. There were several things besides the typical fluid changes and what not.. Well after dinner I got bored since my wife is off to work so I gave the car a quick wash so I can give her a good polish tomorrow so she looks as best as she can on the dyno. I'll post those shots and a video latter.. Ignore the Dents and other signs of Age.... LOL.. __________________ Anything worth doing is worth over doing... Cardomain Site: To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Dyno Video: To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. 1/8 Drag Race: To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Last edited by Lil Shoaf; 04-25-2009 at 08:41 AM.

04-17-2009, 07:47 PM	#2
2000MRDC2 Tri-State Post Whore Join Date: Oct 2005 Location: Philly Member #1004 My Ride: 1999 Integra LS Sedan iTrader: (1)	looks good, the intake mani is sexy, what turbo u running? and what do u expect it to make? __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Honda <3

04-17-2009, 07:54 PM	#3
dudewheresmycar Tri-State Addict Join Date: Nov 2008 Location: Maplewood,NJ Member #10168 iTrader: (0)	looks sexy __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

04-20-2009, 05:53 PM	#13
97TurboDSM TST Ruined My Life! Join Date: Sep 2005 Member #849 My Ride: '03 IY 20th GTI iTrader: (3)	so today was the day. numbers please. __________________ FOR SALE! Canon 5D\|17-40L\|85mm f/1.8\|Sigmalux\|580ex

04-21-2009, 02:32 PM	#14
Lil Shoaf Tri-State Training Wheels Join Date: Feb 2009 Location: Koppel Pa Member #10860 My Ride: 2002 Subaru WRX - Phobos iTrader: (0)	Finally HOME. Well, after a 9 hour trip both ways I am finally home and had a great time. We spent all day at the shop which was pretty nice. I was able to squeeze (2) runs in on the dyno. We did no additional tuning just runs. We didn't log boost either to save time.. I'll post a link to the video once I edit it and host it up.. OK.. Now the number.. They use a Mustang MD-AWD-500-Euro chassis dynamometer at an elevation of 243' according to my GPS unit. I put down 441whp and 375lbtq. I have to wait for ECS Performance to email my graph as they didn't have a printer hooked up to the dyno yet. I'll post it as soon as I get it.. The car hit boost hard and held 375lbtq almost to redline. It had a strong flat TQ curve.. My previous dyno was 425whp and 360lbtq on a DynaJet which most argue is 10-15% higher then a Mustang. I figure the FMIC, Magnus Intake Manifold, Header, and Jethot piping added some decent power.. If calculated the old numbers would be about.. 380whp and 330lbtq VS 441whp and 375lbtq.. I'm happy with the added power.. I put down the highest numbers on their dyno to date.. http://www.eastcoastswappers.com/index.php __________________ Anything worth doing is worth over doing... Cardomain Site: To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Dyno Video: To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. 1/8 Drag Race: To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

04-19-2009, 11:05 PM	#10
SupraMr2 Tri-State Training Wheels Join Date: Feb 2008 Location: King of Prussia, PA Member #6924 My Ride: 1995 Subaru Impreza L Swapped iTrader: (0)	^I wise I can have a PPG box. 5 or 6 speed? Nice build!

04-20-2009, 05:30 PM	#12
856jersey Tri-State Post Whore Join Date: Mar 2009 Location: Philadelphia Member #11382 My Ride: 81 VW Rabbit Pickup & 91 MX-5 Special Edition iTrader: (5)	Red horns <3. Good luck on the dyno dude.

04-21-2009, 06:00 PM	#15
jjm4life Tri-State Post Whore Join Date: Apr 2007 Location: boston Member #4443 My Ride: jew canoe iTrader: (0)	wait let me get this straightl.. you traveled 9hrs round trip for 2 dyno runs and no tuning... wow thats dedication to a shop. great numbers though. must be a beast __________________ current: triumph, abarth gone:RS4 evo lotus(s) noble and a bunch of jeeps

04-21-2009, 06:38 PM	#17
Lil Shoaf Tri-State Training Wheels Join Date: Feb 2009 Location: Koppel Pa Member #10860 My Ride: 2002 Subaru WRX - Phobos iTrader: (0)	Pictures... EWG Dump marked up the Dyno a little bit.. __________________ Anything worth doing is worth over doing... Cardomain Site: To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Dyno Video: To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. 1/8 Drag Race: To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

04-22-2009, 03:42 PM	#18
btyler19877 Tri-State Training Wheels Join Date: Feb 2009 Location: Royersford Member #10844 My Ride: 2007 Mazdaspeed3 iTrader: (0)	niceeeee

04-25-2009, 12:03 AM	#19
Lil Shoaf Tri-State Training Wheels Join Date: Feb 2009 Location: Koppel Pa Member #10860 My Ride: 2002 Subaru WRX - Phobos iTrader: (0)	__________________ Anything worth doing is worth over doing... Cardomain Site: To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Dyno Video: To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. 1/8 Drag Race: To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

04-25-2009, 01:38 AM	#20
Proven Tri-State Post Whore Join Date: Feb 2006 Member #1547 My Ride: 99 RS-WRX iTrader: (0)	SO nice, Def. in love with your #'s and engine / tranny build!!! Still a 2.0L ? __________________ If they don't make it... Build it!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Silverfc88's RX7	Silverfc88	Member Journals	281	06-11-2015 11:33 PM
Are there any upcoming dyno days?	Antonio	Upcoming Events	13	07-29-2010 11:00 PM
Opinions on dyno results (DYNO SHEET UP)	2001teg	Honda / Acura Talk	67	01-19-2010 12:15 AM
My 240sx, sr swapped and now with a dyno sheet. New personal best!!!!! as of 5/28/09	turbo88crx	Member Journals	47	06-09-2009 10:26 PM
412whp SAAB 9-5 *Updated with engine specs and dyno sheet*	Raven18940	Gallery	61	11-07-2006 08:35 PM