Need a dyno..

[sfd]

As I ask this, I know it's been asked before. Thus I bring on the idea of someone maybe making a FAQ/listing for local dynos.

Anyway, I'm looking for something local. I don't know much about dynos except I hear to stay away from mustang dynos. I'm looking for a shop where I can schedule 2-3 pulls and I ask that the shop can use (and has! lol) a timing light to advance the timing on the car after the 1st pull. I don't need any special attention for tuning or anything, just wanna do a base pull and have them bump my timing and pull again to see of any change. I'm gunna post a thread in a minute on why, but I need to grab a dyno pull to help on some comparasion with BP motors.

The cheaper the better, lol. Just as long as a printed sheet goes home with me and the pulls are fairly accurate. Thanks. FWD btw.

[HuffRex]

Xotic Motorsports outside of West Chester

[hystericfox]

Does Xotic do AWD also?

[sfd]

Originally Posted by HuffRex

Xotic Motorsports outside of West Chester

is this their website? http://www.xoticmotorsports.com/

if so to the above poster, yes they do awd.

baseline = just a pull ill assume

i guess ill need to ask if bumping the timing falls into a $140 charge for the 5mins it takes. i hope not

thanks for the link.

[TalonTsi97]

I have a website with a bunch of dynos in PA. When i get hoem i will post but off top of my head there is xotic liek mentioned and phillydynoworks.
I reccomend both whichever is closer to you.

[Gorilla Unit 33]

im not going to bash but ill give six words of advice. dont go to philly dyno works

[07BlackSS]

Originally Posted by Gorilla Unit 33

im not going to bash but ill give six words of advice. dont go to philly dyno works

not a good idea to go there...to many horror stories

[TalonTsi97]

Can we hear some of the stories? I have been there 2 times and everything has been great and i know one of the guys who works there occasionally.

Please im bored at school till 6. give me something to read

[99SL2_Modder]

Is PDW the one down the street from me?

I think Precision Dyno Tuning is right down the street, Seth. Literally. Elkins Ave, I believe. Right off of 13 by the DD and crab joint.

[Gorilla Unit 33]

Originally Posted by TalonTsi97

Can we hear some of the stories? I have been there 2 times and everything has been great and i know one of the guys who works there occasionally.

Please im bored at school till 6. give me something to read

ok here ill give you one...

2003 wrx (not dyno tuned) with TBE (3inch), no cats, engine manegement, 16psi, STOCK TURBO

tell me how 212 awhp and 340 FT LBS OF TORQUE sounds right to you? If you want more i got more...

OHH YEAH AND SHOULD I MENTION MY ONE FRIEND COMES BACK FROM THERE WITH A KEYED/SCRATCHED TRUNK LID (SO DEEP IT CANT BE BUFFED OUT) AND THEY DIDNT DO ANYTHING ABOUT IT.

[C'DALERIDER]

NOOOOOOO, DO NOT go to xotic.



Wait afew weeks, I need Andrew to finish my car.


Xotic is the place.

[TalonTsi97]

Yea well phillydyno works is in a bad neighborhood. You have to park down the street and leave your car unattended but if your in a small group you just park rite infront of the place. So you take your own risk on that.
As for the wrx, i dont know what to say about that. Did he dyno when the place first opened? maybe soemthing was wrong with the dyno.
The 2 dyno meets i went to there with 10-15 cars dynoing includign myself everyones numbers looked normal so i dont know.

Im not defending this place or owe them anything but they were good to me and people i know who went there, but i guess everyone has differant opinions/experiances.
lol post up some more stories got class in 2 hours.

[Gorilla Unit 33]

Originally Posted by TalonTsi97

Yea well phillydyno works is in a bad neighborhood.

what?... hahaha ok dude i think we all know worse parts of philly lol come on thats nothing compared to places ive lived in philly

[99SL2_Modder]

...there's still PDT right off of 13.

I'll go with you Seth! It's a mustang dyno too! I wanna see how much power the fantastic plastic is putting down.

[TROLL]

are you positive philly dyno works is where these problems came from and not another dyno shop that also starts with the letter p? because there is a shop who has left customers unhappy time and time again in the area that maybe you're confusing them with?
i've been to philly dyno works multiple times and seen them dyno a couple dozen cars and everything went smoothly. last time we were there a guy was having some engine issues but wanted to dyno his car and they actually told him not to waste his money until he got his fuel sorted out... yeah thats right they turned down business becuase it wasnt in the best interest of the customer at the time. they seem pretty solid to me...
just want to make sure there is on confusion here becuase a little bad publicity can do a lot of damage on the internet and especially on message boards, so just respect the power that your words carry here.
i've also heard good things about xotic, and am very confident in their subaru tuner.
bryan

[07BlackSS]

I am not defending or trying to bash any place by all means. I have just heard some cars comming back with low dyno numbers. And no this was not when they first opened.

[TROLL]

low numbers does not mean bad shop. low is all relative... they have a lower reading dyno but you cant compare numbers from different dynos on different days anyways. dynos are for tuning cars... its comparing a baseline to a finished tune... same car, same dyno, same day if possible.
PDX tuning recently posted about their mustang dyno compared to a dynojet in the area. they did a pull with their STi on their dyno and made 414 whp, then they drove it right over to this dynojet dyno in the area and without making any changes they made 464 whp... and thats really not uncommon. dont get too caught up in the peak number because it can vary greatly depending on a number of conditions.
and fwiw, 212 whp is pretty much spot on for a car with the mods you listed. 300+ ft. lbs is definitely wrong though... should be in the low 200s.
and i'm not saying you couldnt have had a bad experience there, just sharing my own experience and my opinion on the importance of accurate vendor/shop reviews.
bryan

[Gorilla Unit 33]

yea troll trust me im sure, ive been there also. twice to be exact. the WRX is also on these forums and if he wants to he'll confront you off the record about his expeirence. im just passing the word so that i dont have to hear about people's ****ty expeirence's at this place and for people to actually save there money to go to a better place.

On another note i also have heard good things about xotic, and their subaru tuner (andy). I acutally had a chance to ride up there one day wih another member, to check out the shop and meet andy. I was suppose to meet up with subwrxkid that day also along with a few other but they missed out. Andy and Xotic build some amazing stuff. ill even post some pics below so u can see some of their work.

[TalonTsi97]

Originally Posted by Gorilla Unit 33

what?... hahaha ok dude i think we all know worse parts of philly lol come on thats nothing compared to places ive lived in philly

Ok to be taking a nice car and leaving it unattended in a ****ty lot downtown doesnt look like the best spot to some people. No one said its the worse spot in philly but comparing to most of the dynos i been to or know of its not in the greatest neighborhood for people to be bringing and leaving cars with gauges and other electronics hanging out.
And i dont remember seeing you there the last time i was there and seeign the screwed up people coming by the shop talkin **** and the ones lookign at the cars.

http://www.dynojet.com/maps/autodynos/pa.htm

[Gorilla Unit 33]

Originally Posted by TalonTsi97

And i dont remember seeing you there the last time i was there and seeign the screwed up people coming by the shop talkin **** and the ones lookign at the cars.

ive been there ...actually i was there on the dyno day where wil (2point2dsm) had to be towed back home. It doesnt matter if i was there or not the messed up dyno charts prove itself.