clutch slipping like a mother ****er

[300zTT]

its very odd... some days the clutch would be fine ( not perfect still slip alittle) and some days it will slip like crazy.
i have started to notice that it started to slip when it got cold out. but it slips when the clutch is cold and still slipps when i have drive it for over an hour wen it should have gotten warmer.
any way i have the rps street which should handle 420 lbs ft. and a fidanza flywheel. i broke it in for 1000miles i have had both on for about 7 months and about 15K on them. yes i do beat the living hell out of the car but should it only last that long.

what can be my problem, is it galzed over, booster went bad, cutch pedle adj, just buy an new clutch ( which one something strong)
i hear puck's dont last to long
i want something to last me more then 15 k like this one did. yes i did beat the **** out of it...
will i also need a new flywheel?
i just dont get it!

what u guys think i should do????

[Structure240sx]

think about them like tires. the sticker the tire the less amount of miles you get out of it. not exactly how it works but just think about it that way.

i only got about 10k miles out of my clutchmasters stage 5 til it started slipping

[D Money]

Maybe you have a bad master cylinder, ahh who knows though!

[silver05bullet]

mine slips too thats what u get for doing donuts in the parking lots and drifting all over the place, u will not need a new flywheel call fidanza at P: (440) 259-5656 x111 this is brad bojc or email at brad@fidanza.com, you will need a new friction surface for the flywheel about 90$+shipping thats where i got mine from

[silver05bullet]

the clutch is gone theres no question to it we can play with it and try to adjust it buyt i highly doubt that will work.

[300zTT]

Originally Posted by silver05bullet

mine slips too thats what u get for doing donuts in the parking lots and drifting all over the place, u will not need a new flywheel call fidanza at P: (440) 259-5656 x111 this is brad bojc or email at brad@fidanza.com, you will need a new friction surface for the flywheel about 90$+shipping thats where i got mine from

damn i was thinking like 50 bucks for that ****!

[silver05bullet]

also get another street disk, the puck clutches create too much force on the driveline components and you might be rebuilding the rear the way you drive after like 5000miles on a 6puck or 4 puck

[silver05bullet]

Originally Posted by 300zTT

damn i was thinking like 50 bucks for that ****!

No one has it around the area thats why i had to get it directly from fidanza if you find a place somewhere u might get it cheaper

[300zTT]

Originally Posted by silver05bullet

also get another street disk, the puck clutches create too much force on the driveline components and you might be rebuilding the rear the way you drive after like 5000miles on a 6puck or 4 puck

the stock 300zx rear has been good on the 600+hp 300zx tt one of the guys on tt.net owns so im not worried about breaking anything. hes pulling 1.4 60ft's with out breaking abny thing and its also been good on the 1000+ hp single turbo 300zx another tt.net member owns. so i realy dont care how it grabs harsh or not as long as it does and i want it to last long!!!!

[igo4bmx]

i would start by trying to bleed the lines

[silver05bullet]

He did that already

[igo4bmx]

Originally Posted by silver05bullet

He did that already

I should start by reading the thread

[silver05bullet]

Originally Posted by igo4bmx

I should start by reading the thread

He didnt write that in the thread i just know he did it already

[D Money]

Mo, if you would just stop drivin like an asshole, ie burnouts every 5 mins, trying to race awd cars and burning the clutch just to keep up, comon man. If you drove your car normal and gave it a lil bit at times, you wouldnt be in this situation with a clutch that is less than 1 year old being bad.

[S4toSTI]

Come on driving your car normally is silly.

[D Money]

Originally Posted by S4toSTI

Come on driving your car normally is silly.

That's not true, then you will have a beat ass clutch like Mo!

[S4toSTI]

Bah.

[D Money]

Originally Posted by S4toSTI

Bah.

Fine, drive your car like Mo and you will need a clutch like Mo. Clutch=expensive Barry, you will find out if you drive your car hard.

ps- your so going to get smoked!

[S4toSTI]

Originally Posted by subwrxkid

Fine, drive your car like Mo and you will need a clutch like Mo. Clutch=expensive Barry, you will find out if you drive your car hard.

ps- your so going to get smoked!

Dude sti tranny. It owns you as will i.

[300zTT]

yea thats right i cant drive normoly.. then the twin turbos would be healthy.. they need to spin fast. lol i realy dont mind changing my clutch takes about and hour of so so its not a big deal.. the big deal is me dropping 500 bones on it! but hey wut can i do i should have just bought the stage III clutch in the 1st place atleast now i will be good till 700 ft of TQ! hahahhaha