rx7 wheel studs - TriStateTuners.com :: Home of Tristate Auto Enthusiast

driftingrx5.7 · 04-25-2009, 09:26 PM

where can i find them? i went to check my rear brakes on my fc and two of my studs snapped i am so pissed but i can't find anywhere them! So if anyone knows what arp studs i can get or something please let me know!

disstractin_FC · 04-25-2009, 10:23 PM

here ya go homie, ordering mine next week

http://store.summitracing.com/partde...5&autoview=sku

driftingrx5.7 · 04-25-2009, 11:35 PM

nice thats what i needed to find out

Dave 88 A.E · 04-26-2009, 07:57 AM

I found mine at napa and autozone when i needed a few.

driftingrx5.7 · 04-26-2009, 10:39 AM

yeah well i snapped two of them and i was so mad last night when i took the hub off i popped all 5 of them off so i am going to call around now and see who has what i need! i want to get it back on the road by friday

also searching last night i found these
http://store.summitracing.com/partde...5&autoview=sku

so which ones would i need?

driftingrx5.7 · 04-26-2009, 01:54 PM

ok i just called summit and we did some messuring and this is what we need to do
front=
http://store.summitracing.com/partde...804+4294780229

rear =
http://store.summitracing.com/partde...5&autoview=sku

we messured the front stock lug (since i have a messed up front hub in my shed) and it messured 2.75 long the ones listed on the front is a little longer which will give you a better grip with some after market wheels you may have. the rears messured just under 2 inches and being that the ones listed with arp will give you the extra length now much but a better then stock! hope that helps anyone in the future

Plastik Racer · 04-28-2009, 07:10 AM

good info especially because I want to run some spacers and I don't trust the studs that come with those.

04-25-2009, 09:26 PM	#1
driftingrx5.7 Tri-State Post Whore Join Date: Dec 2006 Location: Poconos PA Member #3099 My Ride: 88 rx5.7 iTrader: (0)	rx7 wheel studs where can i find them? i went to check my rear brakes on my fc and two of my studs snapped i am so pissed but i can't find anywhere them! So if anyone knows what arp studs i can get or something please let me know! __________________ my v8 rx7build To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

04-25-2009, 10:23 PM	#2
disstractin_FC Tri-State Aficionado Join Date: Feb 2008 Location: South jersey Member #6820 My Ride: 1987 Rx7 iTrader: (1)	here ya go homie, ordering mine next week http://store.summitracing.com/partde...5&autoview=sku __________________ 1987 FC3S: 1990 13bt, Half-Bridge port, microtech FMIC, custom exhaust, Ksport Kontrolpro coilovers, MMR delrin bushings ,S370 BW turbo, KG rails, 750cc(2), 1680cc(2), gilmer drive,etc... To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

04-25-2009, 11:35 PM	#3
driftingrx5.7 Tri-State Post Whore Join Date: Dec 2006 Location: Poconos PA Member #3099 My Ride: 88 rx5.7 iTrader: (0)	nice thats what i needed to find out __________________ my v8 rx7build To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Last edited by driftingrx5.7; 04-25-2009 at 11:45 PM.

04-26-2009, 07:57 AM	#4
Dave 88 A.E Tri-State Aficionado Join Date: Dec 2006 Location: Scranton, Pa Member #3154 My Ride: 1988 10th Anniversary RX7, 1985 GSL-SE Widebody RX-7 iTrader: (0)	I found mine at napa and autozone when i needed a few. __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

04-26-2009, 10:39 AM	#5
driftingrx5.7 Tri-State Post Whore Join Date: Dec 2006 Location: Poconos PA Member #3099 My Ride: 88 rx5.7 iTrader: (0)	yeah well i snapped two of them and i was so mad last night when i took the hub off i popped all 5 of them off so i am going to call around now and see who has what i need! i want to get it back on the road by friday also searching last night i found these http://store.summitracing.com/partde...5&autoview=sku so which ones would i need? __________________ my v8 rx7build To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

04-26-2009, 01:54 PM	#6
driftingrx5.7 Tri-State Post Whore Join Date: Dec 2006 Location: Poconos PA Member #3099 My Ride: 88 rx5.7 iTrader: (0)	ok i just called summit and we did some messuring and this is what we need to do front= http://store.summitracing.com/partde...804+4294780229 rear = http://store.summitracing.com/partde...5&autoview=sku we messured the front stock lug (since i have a messed up front hub in my shed) and it messured 2.75 long the ones listed on the front is a little longer which will give you a better grip with some after market wheels you may have. the rears messured just under 2 inches and being that the ones listed with arp will give you the extra length now much but a better then stock! hope that helps anyone in the future __________________ my v8 rx7build To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

04-28-2009, 07:10 AM	#7
Plastik Racer Tri-State Addict Join Date: May 2006 Location: South Jerzey Member #1981 My Ride: 99 Subaru Impreza, 03 Subie legacy DD iTrader: (2)	good info especially because I want to run some spacers and I don't trust the studs that come with those. __________________ *To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.* *To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I need extended wheel studs.	ls95civic	Pennsylvania	4	05-02-2009 12:08 AM