Anybody ever dealt with a locksmith? - TriStateTuners.com :: Home of Tristate Auto Enthusiast

Kevin · 03-18-2009, 02:15 PM

I got a key stuck in an ignition and when pulling it out it broke. Anyone have any experience with a locksmith that they would recommend? I'm also not looking forward to getting bent over and taken up the ole highway.

Thanks!

gsrboi80 · 03-18-2009, 02:51 PM

A couple times. If the car doesnt have an Immobilizer you might be better off getting a replacement mechanism and mated key from a JY. They usually have tons of them on the shelf

poisonivory · 03-18-2009, 02:54 PM

my ignition got messed and i ordered a new one and changed it out by myself. Was quite easy compared to the hassle of getting a locksmith. but if you're looking to get the broken key out of your current ignition, i have no recommendations bro, sorry.

Kevin · 03-18-2009, 03:00 PM

Quote:

Originally Posted by gsrboi80

A couple times. If the car doesnt have an Immobilizer you might be better off getting a replacement mechanism and mated key from a JY. They usually have tons of them on the shelf

Yea I was thinking. I found a locksmith for $75 for everything no hidden fees so I'll try them to get it out. Looks like it might not be that hard.

Quote:

Originally Posted by poisonivory

my ignition got messed and i ordered a new one and changed it out by myself. Was quite easy compared to the hassle of getting a locksmith. but if you're looking to get the broken key out of your current ignition, i have no recommendations bro, sorry.

Yea I have to do more research, the ignition cylinder probably pops out right? I looked and the metal part is like bolted to the steering column.

poisonivory · 03-18-2009, 03:20 PM

dude i am a total newb when it comes to DIY on a car. I got the new ignition cylinder from the dealer already assembled. It was rather straightforward. However, even though i drive a focus this may apply.......since the key is stuck you may be screwed...if i remember correctly i had to turn the key to a certain position so the cylinder lined up to slide it out.

zerioustt · 03-18-2009, 03:30 PM

what kind of car? depending on how new the car is pulling a ignition isnt that hard.

or you could screwdriver it...lols

Kevin · 03-18-2009, 10:05 PM

Paid $140 to have it drilled so it can be started with a screwdriver. Wheel stayed locked and couldn't drive it after I did for like 100 ft. and you have to hold it in ON to keep the car running. Wonder how bad they'll pound my asshole for an ignition cylinder and key installed

OutToWinPAHC · 03-19-2009, 12:00 AM

What happened to 75 bucks

Kevin · 03-19-2009, 07:55 AM

Quote:

Originally Posted by OutToWinPAHC

What happened to 75 bucks

**** if I know.

You don't need to drill a ignition cylinder to replace it right?

CHAOS · 03-19-2009, 08:14 AM

kevin send a PM to ToTheIX's about this.

Kevin · 03-19-2009, 08:28 AM

Quote:

Originally Posted by CHAOS

kevin send a PM to ToTheIX's about this.

Does Dustin have a gun? I'd like to blow my brains out before I piss away any more money lol

CHAOS · 03-19-2009, 08:31 AM

hes a locksmith and has a lot of dsm experience... so i supposed hes the best possible person to talk to at this point.

Kevin · 03-19-2009, 08:33 AM

Quote:

Originally Posted by CHAOS

hes a locksmith and has a lot of dsm experience... so i supposed hes the best possible person to talk to at this point.

Def, tank you Jon

97TurboDSM · 03-19-2009, 02:25 PM

why didnt you just pop the ignition cylinder out? takes like 3 seconds

dragonfly2k3 · 03-19-2009, 03:32 PM

sell it. thats the only reasonable answer.

Kevin · 03-19-2009, 04:05 PM

I'm trying

Red01Focus · 03-20-2009, 08:10 PM

i locked my keys in the car once but since the car is on loan i got a free plan for 4years that includes lock smith, tow truck etc.

Kevin · 03-20-2009, 09:34 PM

Quote:

Originally Posted by Red01Focus

i locked my keys in the car once but since the car is on loan i got a free plan for 4years that includes lock smith, tow truck etc.

Your lucky.

I'm just gonna look for a new cylinder and key and do it myself. **** those Russian gypsys

OutToWinPAHC · 03-20-2009, 11:45 PM

I just don't see why you actually paid 140 to let some dude drill your ignition. Thats when he says 140, you laugh and tell him to beat it.

Kevin · 03-21-2009, 03:14 AM

Quote:

Originally Posted by OutToWinPAHC

I just don't see why you actually paid 140 to let some dude drill your ignition. Thats when he says 140, you laugh and tell him to beat it.

When a key is stuck in your ignition you cant just pop out the cylinder, it MUST be drilled. Just found that out from ToTheIX's

03-18-2009, 02:54 PM	#3
poisonivory Tri-State Addict Join Date: Oct 2007 Location: Philly Member #5979 My Ride: 2010 Lancer GTS iTrader: (0)	my ignition got messed and i ordered a new one and changed it out by myself. Was quite easy compared to the hassle of getting a locksmith. but if you're looking to get the broken key out of your current ignition, i have no recommendations bro, sorry. __________________ -Mario To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

03-18-2009, 03:20 PM	#5
poisonivory Tri-State Addict Join Date: Oct 2007 Location: Philly Member #5979 My Ride: 2010 Lancer GTS iTrader: (0)	dude i am a total newb when it comes to DIY on a car. I got the new ignition cylinder from the dealer already assembled. It was rather straightforward. However, even though i drive a focus this may apply.......since the key is stuck you may be screwed...if i remember correctly i had to turn the key to a certain position so the cylinder lined up to slide it out. __________________ -Mario To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

03-19-2009, 02:25 PM	#14
97TurboDSM TST Ruined My Life! Join Date: Sep 2005 Member #849 My Ride: '03 IY 20th GTI iTrader: (3)	why didnt you just pop the ignition cylinder out? takes like 3 seconds __________________ FOR SALE! Canon 5D\|17-40L\|85mm f/1.8\|Sigmalux\|580ex

03-19-2009, 03:32 PM	#15
dragonfly2k3 Tri-State Post Whore Join Date: Mar 2007 Member #4106 iTrader: (5)	sell it. thats the only reasonable answer. __________________ HIDs, they're serious business.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone ever dealt with a total loss / insurance?	Xavier	General Car Related Chat	4	11-08-2010 02:28 PM
ExtremePSI Best vendor I have ever dealt with	gtsiawd96	Parts and Vendor Reviews	8	03-04-2010 06:07 PM
Key stop working? Locked out? Lost your key? Some Locksmith/Key/Lock Facts!	DPancoast	General Car Related Chat	3	05-31-2009 02:46 PM
Anyone dealt with cars that have frame damage?	TROLL	General Car Related Chat	18	11-06-2008 10:47 AM

03-18-2009, 02:51 PM	#2
gsrboi80 Tri-State Addict Join Date: Oct 2006 Member #2795 My Ride: Evolution Baby iTrader: (0)	A couple times. If the car doesnt have an Immobilizer you might be better off getting a replacement mechanism and mated key from a JY. They usually have tons of them on the shelf

03-19-2009, 12:00 AM	#8
OutToWinPAHC Tri-State Post Whore Join Date: Jun 2007 Location: Tokelau Member #5081 My Ride: R33 GTS25T, RHD E46, Truck, part R32 GTR iTrader: (2)	What happened to 75 bucks

03-19-2009, 08:14 AM	#10
CHAOS TST Ruined My Life! Banned Join Date: Jun 2006 Member #2120 My Ride: 1984 Cadillac Brougham iTrader: (1)	kevin send a PM to ToTheIX's about this.

03-19-2009, 08:31 AM	#12
CHAOS TST Ruined My Life! Banned Join Date: Jun 2006 Member #2120 My Ride: 1984 Cadillac Brougham iTrader: (1)	hes a locksmith and has a lot of dsm experience... so i supposed hes the best possible person to talk to at this point.

03-20-2009, 08:10 PM	#17
Red01Focus Tri-State Training Wheels Join Date: Jun 2008 Location: Lancaster PA Member #7937 My Ride: 2001 Infa Red Ford Focus SE iTrader: (0)	i locked my keys in the car once but since the car is on loan i got a free plan for 4years that includes lock smith, tow truck etc.

03-20-2009, 11:45 PM	#19
OutToWinPAHC Tri-State Post Whore Join Date: Jun 2007 Location: Tokelau Member #5081 My Ride: R33 GTS25T, RHD E46, Truck, part R32 GTR iTrader: (2)	I just don't see why you actually paid 140 to let some dude drill your ignition. Thats when he says 140, you laugh and tell him to beat it.