kinda new here - TriStateTuners.com :: Home of Tristate Auto Enthusiast

snackman508 · 01-26-2009, 06:54 PM

Hi im Asher Garber ive been around for maybe a couple months now, but with a recent job change ive got more time to get on and start posting. I got my civic in July with most of the stuff all ready done to it, but am still looking to get more power out of it as i get the $. here is what ive got.

1998 Honda Civic DX Hatchback with power steering
Engine – D16Y7
Block was bored .5mm over and honed
Vitara 75.5mm pistons
Eagle H beam rods w/ ARP rod bolts
NPR piston rings
ACL rod bearings
ACL main bearings
ACL thrust washers
ARP Headstuds
Walbro 255 LPH Fuel Pump
Greddy Turbo Timer
HKS Style BOV
ebay FMIC
Greddy 15g Turbo
Greddy Turbo Manifold
Greddy Downpipe
Motorola 2.5 Bar Map Sensor
DSM 450cc Blue Top Injectors
P06 Chipped with Neptune
RSR Exmag GT 2 Exhaust (Slip fit design, 100% Straight piping until muffler angle)
ACT HDSS Clutch
D16Z6 Intake Manifold
B16 Throttle Body

Suspension
Innovative Motor Mounts
Ingalls Torque Damper
Brembo Blank Rotors
Hawk HPS Pads
Omni Power Coilovers

Interior
DEFI Style Gauges
CTR Style Door Panels (Just done)
CTR Style Carpet (New)
Skunk2 Shift Knob
EBay Short Shifter
CTR Shift Boot
Civic SI Cluster
5th Gen Prelude Front Seats

lownslow95 · 01-26-2009, 07:06 PM

Welcome to TriState.

ndubz · 01-26-2009, 07:08 PM

Yo whatup Playboy!!!!!!!!

94integra · 01-26-2009, 07:17 PM

I think i saw your car in the mcd's on lincoln highway in lancaster.

nightblurr · 01-26-2009, 07:18 PM

nice civic, real clean

05OCsrt-4 · 01-26-2009, 07:19 PM

welcome

JDMTyler3326 · 01-26-2009, 07:20 PM

Welcome to TST man. But i think it needs to be lowered and maybe some smaller rims.

foamcup · 01-26-2009, 07:33 PM

Welcome, how much hp are you making off that single cam?

jdm free · 01-26-2009, 08:56 PM

welcome to tst. nice build, just not feelin the wheels

omgjacki · 01-27-2009, 04:57 PM

Welcome to TST

twastheglow · 01-27-2009, 05:06 PM

Welcome to the site.

SvicksTc · 01-27-2009, 05:58 PM

Welcome to TST, and nice car Man....

WetSSBolt · 01-27-2009, 06:09 PM

Clean I like it welcome

greg6g72 · 01-27-2009, 06:12 PM

i like nice build, i agree with jdm free though im not feeling the wheels but thats my opinion. welcome to tst

snackman508 · 01-27-2009, 06:46 PM

yah probly did see me at mcd's on lincoln highway in lancaster im around that area alot. As for the wheels do you not like the look (black with the silver lip) or are they just to big? I agree they are to big. I had it lowered an inch more with SI wheels and it looked better. Im not gun ho about the SI wheels like some guys are, looking for other 16s let me know what look you would go with, open to ideas. as for the clean look it got new paint this summer.

snackman508 · 01-27-2009, 06:48 PM

forgot to say im making around 200hp

JDMTyler3326 · 01-27-2009, 06:56 PM

Quote:

Originally Posted by snackman508

yah probly did see me at mcd's on lincoln highway in lancaster im around that area alot. As for the wheels do you not like the look (black with the silver lip) or are they just to big? I agree they are to big. I had it lowered an inch more with SI wheels and it looked better. Im not gun ho about the SI wheels like some guys are, looking for other 16s let me know what look you would go with, open to ideas. as for the clean look it got new paint this summer.

SI rims or rims that are no bigger then 16s.

I think the 14s CX wheels would look nice on it.

snackman508 · 01-27-2009, 07:55 PM

I have SI rims i think they are 14or15s but i want to get maybe after market 16s with low pros on them. and then i can slam it.

dcnism0 · 03-17-2009, 03:35 PM

welcome

vanessa · 03-18-2009, 12:25 AM

welcome!!!!

01-26-2009, 06:54 PM	#1
snackman508 Tri-State Aficionado Join Date: Apr 2008 Member #7494 My Ride: 1998 Honda DX turboed/ 1996 240sx RB25 in mid swap iTrader: (1)	kinda new here Hi im Asher Garber ive been around for maybe a couple months now, but with a recent job change ive got more time to get on and start posting. I got my civic in July with most of the stuff all ready done to it, but am still looking to get more power out of it as i get the $. here is what ive got. 1998 Honda Civic DX Hatchback with power steering Engine – D16Y7 Block was bored .5mm over and honed Vitara 75.5mm pistons Eagle H beam rods w/ ARP rod bolts NPR piston rings ACL rod bearings ACL main bearings ACL thrust washers ARP Headstuds Walbro 255 LPH Fuel Pump Greddy Turbo Timer HKS Style BOV ebay FMIC Greddy 15g Turbo Greddy Turbo Manifold Greddy Downpipe Motorola 2.5 Bar Map Sensor DSM 450cc Blue Top Injectors P06 Chipped with Neptune RSR Exmag GT 2 Exhaust (Slip fit design, 100% Straight piping until muffler angle) ACT HDSS Clutch D16Z6 Intake Manifold B16 Throttle Body Suspension Innovative Motor Mounts Ingalls Torque Damper Brembo Blank Rotors Hawk HPS Pads Omni Power Coilovers Interior DEFI Style Gauges CTR Style Door Panels (Just done) CTR Style Carpet (New) Skunk2 Shift Knob EBay Short Shifter CTR Shift Boot Civic SI Cluster 5th Gen Prelude Front Seats

01-27-2009, 04:57 PM	#10
omgjacki Tri-State Post Whore Join Date: Sep 2007 Location: Gilbertsville, PA Member #5869 My Ride: 2018 CX-5 GT Premium, 2018 Honda Grom iTrader: (4)	Welcome to TST __________________ Ryan M. Sherwood September 9, 1985 - October 7, 2009

01-27-2009, 05:58 PM	#12
SvicksTc Tri-State Post Whore Join Date: Apr 2008 Location: Spoolin a Snail Member #7395 My Ride: Nike 6.0 iTrader: (1)	Welcome to TST, and nice car Man.... __________________ Why V-tec When there is To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. ? \|Nikon\| Twitter: To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

01-27-2009, 06:09 PM	#13
WetSSBolt Tri-State Aficionado Join Date: May 2008 Location: Richlandtown, Pa Member #7733 My Ride: 2005 Chevrolet Cobalt SS iTrader: (0)	Clean I like it welcome __________________ Its all stock I promise To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

01-27-2009, 06:12 PM	#14
greg6g72 Tri-State Aficionado Join Date: Dec 2008 Location: Allentown, PA Member #10454 My Ride: 07 G35 Coupe 6 m/t iTrader: (0)	i like nice build, i agree with jdm free though im not feeling the wheels but thats my opinion. welcome to tst __________________ One time my mom forgot to cut the crust off my peanut butter and jelly sandwich. I tombstoned her off the kitchen table..::R.I.P. Corbin Graver::..

01-26-2009, 07:08 PM	#3
ndubz Tri-State Post Whore Join Date: Oct 2007 Location: tristate area Member #6107 iTrader: (1)	Yo whatup Playboy!!!!!!!!

01-26-2009, 07:17 PM	#4
94integra Tri-State Addict Join Date: Mar 2008 Location: Lancaster,PA Member #7222 My Ride: 93.5 p10 iTrader: (0)	I think i saw your car in the mcd's on lincoln highway in lancaster.

01-26-2009, 07:18 PM	#5
nightblurr Tri-State Aficionado Join Date: Oct 2008 Location: Quakertown, pa Member #9546 My Ride: 2011 WRX iTrader: (1)	nice civic, real clean

01-26-2009, 07:20 PM	#7
JDMTyler3326 TST Ruined My Life! Join Date: Oct 2008 Location: Around Member #9917 My Ride: ^ iTrader: (0)	Welcome to TST man. But i think it needs to be lowered and maybe some smaller rims.

01-26-2009, 07:33 PM	#8
foamcup Tri-State Training Wheels Join Date: Jan 2008 Location: on the streets Member #6789 My Ride: Ferrari F40, Noble m400, 1200hp Surpa MK4, Jet Plane, And a fuking boat! iTrader: (0)	Welcome, how much hp are you making off that single cam?

01-26-2009, 08:56 PM	#9
jdm free Tri-State Post Whore Banned Join Date: Feb 2006 Location: Langhorne Member #1481 My Ride: 6spd Civic iTrader: (3)	welcome to tst. nice build, just not feelin the wheels

01-27-2009, 06:46 PM	#15
snackman508 Tri-State Aficionado Join Date: Apr 2008 Member #7494 My Ride: 1998 Honda DX turboed/ 1996 240sx RB25 in mid swap iTrader: (1)	yah probly did see me at mcd's on lincoln highway in lancaster im around that area alot. As for the wheels do you not like the look (black with the silver lip) or are they just to big? I agree they are to big. I had it lowered an inch more with SI wheels and it looked better. Im not gun ho about the SI wheels like some guys are, looking for other 16s let me know what look you would go with, open to ideas. as for the clean look it got new paint this summer.

01-27-2009, 06:48 PM	#16
snackman508 Tri-State Aficionado Join Date: Apr 2008 Member #7494 My Ride: 1998 Honda DX turboed/ 1996 240sx RB25 in mid swap iTrader: (1)	forgot to say im making around 200hp

01-27-2009, 07:55 PM	#18
snackman508 Tri-State Aficionado Join Date: Apr 2008 Member #7494 My Ride: 1998 Honda DX turboed/ 1996 240sx RB25 in mid swap iTrader: (1)	I have SI rims i think they are 14or15s but i want to get maybe after market 16s with low pros on them. and then i can slam it.

03-17-2009, 03:35 PM	#19
dcnism0 Tri-State Aficionado Join Date: Mar 2009 Member #11192 My Ride: 1998 240sx iTrader: (0)	welcome

03-18-2009, 12:25 AM	#20
vanessa Tri-State Aficionado Join Date: Nov 2008 Location: Quakertown, PA Member #10295 My Ride: 2001 Mazda MP3 iTrader: (0)	welcome!!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
kinda new	MattyK17	Welcome to TriStateTuners	15	05-28-2011 07:25 PM
New guy kinda.....	JerseyTuscani	Welcome to TriStateTuners	8	09-14-2007 05:11 AM
Kinda New	enohand	Pennsylvania	2	07-03-2007 03:01 PM
New... kinda.	Signatus230	Welcome to TriStateTuners	16	02-06-2007 09:21 AM