Forced Performance GT3582HTA Ball Bearing Turbocharger *CLEARANCE*

[extremepsi]

Forced Performance GT3582HTA Ball Bearing Turbocharger *CLEARANCE*

The FP GT3582HTA turbocharger is very similar the to the standard GT3582R Garrett turbocharger in overall size and footprint, but that is where the similarities end and your new found power begins. It comes with a 4" inlet and 2.5" outlet anti-surge ported compressor housing. This new and improved style of anti-surge port provides a longer and more gentle bell mouth guide for the air all the way down to the inducer tips. The standard turbine housing is the T31 housing in 2.5" outlet for compact installation applications such as 4G63. Other turbine housings styles are available.

Repeated dyno testing and thousands of miles of street punishment have shown how much faster spooling the HTA is compared to the normal 35R. Midrange and bottom end torque which are usually dismal in regular .82 A/R GT35r kit cars are DRAMATICALLY improved with HTA compressor technology!

If you always wanted a 35R on your car, but just could not stand the thought of all that lag - then you have found the answer to your troubles. At 4800rpm the FP3582HTA delivers a 50ft-lb torque increase over the standard Garrett 35R.

FP GT3582HTA .82AR, 4 Bolt, 2.5" outlet - $1,549.00

Thanks,
Jessica
Extreme PSI