keeper recommended you vince. I might throw some work your way.

[Vr-4-Life]

I wanted to get some information. I have a turbo kit that i want put back on the car. the downpipe might have to be tweaked but other then that it should all just bolt back on. this is for a d15b by the way

here is everything to be done

Swap the stock oil pan for the tapped one
Install my blue top injectors
Install the resistor pack (i have an oem honda and dsm)
Put the chip back in the zif socket in the ecu
Put the manifold on the turbo is already bolted on with the ewg
Install the downpipe(may need to be shortened or extended)
Bolt on the VTA flexable dump tube
Install about 4 very easily accessable intercooler pipes (bov already on one)
Connect the vac lines to the ewg and bov
Install the sandwich adaptor and run the oil line to the turbo
connect the return line

most of the kit is still in the car such as the IC and fuel pump etc.

Can i get some kind of cost estimate?