New things around the JMF shop

[91TSiGuy]

Hey everyone, I suppose it's time for a bit of an update of what's going on lately at JM Fab. While the economy hasn't slowed down our business, we've still been able to do a few new things here and there while keeping up with current orders.

One of the new options we'd like to offer will be anodizing on certain parts. Right now we're looking to offer simple things like our spark plug and coil on plug covers, as well as battery tie downs and rear diffusers in the color black option. The plug covers will be engraved after anodizing to provide a nice silver look on letters and logos as seen below. The battery tie downs will probably be done the same way, but we want to hear back from you guys first on what you'd like.

Below you'll see an example of a tie down that was already engraved before anodizing. As for the rear diffusers, we'll also be looking into finding some aluminum hardware that can be anodized black as well to give a flat clean look, or you may also opt for the standard stainless hardware. I also want to mention this anodizing will be available for our bolt in fuel cells to those who want to run ethanol! There will be an additional charge with items for this option which we still need to finalize a rate for but it shouldn't be a wallet breaker. ;)

Anyway, on to the pics:

JMF Small Battery Kit tie down in black anodize


JMF Rear Bumper Diffusers in black anodize with stainless hardware



An example of our spark plug covers anodized in black and then custom engraved afterwards for one of our affiliate vendors




But that's not all. We've also been busy in the exhaust manifold department as well. Right now we've just completed the first of our production model Evo 4-9 T3 exhaust manifold. This manifold clears the stock upper radiator hose and provides nice snug fitment for both the turbo and the wastegate of your choice. As with our other manifolds we do extensive porting on the inlet and collector areas of our manifolds where as other companies just throw some welds on the insides and leave the transitions nice and bumpy. Here are some pics of our latest creation:










Keep an eye out as we begin to offer more exhaust manifolds in the future for DSM's and Evos in the T3 & T4, divided T3 & T4, and Tial V-band turbine housing inlets. We also have a few new show & shine items for the Evo that should be available soon too as the prototypes are already made up. I can't let the cat out of the bag on these just yet though.

[TROLL]

looks beauuuutiful. good work guys...

[cmr076]

nice stuff! you guys never cease to amaze me!

[Eclipse GSX 61]

Good lord you guys make some of the nicest manifolds around. All your newer models amaze me.

[The Captain]

that manifold looks like sex.

[D Money]

awesome work, wish someone welded titanium though haha jk

[justinlansdale]

wow! the manifold looks great, and hilarious plate on the talon ;-)

[91TSiGuy]

Some more updates:

Here's the Evo T3 exhaust manifold installed and with a JnZ Finishing ceramic coating.





As I mentioned before, we were working on releasing some new exhaust manifolds for you guys. Some of you may have already seen our divided T3 manifold in person, some may have not yet. Here's the first one we did for a local customer a couple months ago:




Well, that was the first and last manifold we did with a single wastegate due to troubles getting in certain areas welding. We updated the design to use twin wastegates, and then our one co-worker Justin threw a twist into the loop this past week with his own version of that manifold, seen here:

[freebmx444]

last mani is sick!

[alwaysinboost]

awesome work guys!

[slowbra]

jmf is sick!

[Forc3 F3d]

ill will be in the market for one of those bad boys in the next few weeks... did you guys ever get a 2g to make mock fittings yet?

and any word on the 2g garret fmic core?

[91TSiGuy]

We do have our own 2g at the shop now for fitment of parts. What else were you looking for other than the fmc? Right now we can do a 2g fmic with the 23.7"x12"x3.8" core for $850 shipped, and less if picked up.

[Forc3 F3d]

Originally Posted by 91TSiGuy

We do have our own 2g at the shop now for fitment of parts. What else were you looking for other than the fmc? Right now we can do a 2g fmic with the 23.7"x12"x3.8" core for $850 shipped, and less if picked up.

is that that garret kit you guys are making?

and then im looking to get a t3 manifold from ya... for a 2g of course. are they all twin WG's now or do you still make the singles?

[jjm4life]

so i had a spark plug blow apart my spark plug cover. im looking for a new one that doesnt leave me as a rolling ad for someother company. how much for one of those anodized guys?

by the way, love the battery kit. looks great in my car

[TalonTsi97]

Originally Posted by jjm4life

so i had a spark plug blow apart my spark plug cover. im looking for a new one that doesnt leave me as a rolling ad for someother company. how much for one of those anodized guys?

by the way, love the battery kit. looks great in my car

Same position I'm in. I can't stand advertising like that, I'd love to get one made to copy the stock 8 cover.

[jjm4life]

^^ yea just something simple.. how about the mistu emblem like the evo9 spark plug cover.. but in a nicer material than the plastic..

[TalonTsi97]

Ideally for me i'd like the diamond then Mitsubishi rite after it but something other then a company name or EVOLUTION would be good with me.

[jjm4life]

they stock one that says evolution but its polished.. not exactly my style. i have their polished mini battery kit, but its small so i dont mind it. its actually a really nice piece.

[TalonTsi97]

I don't want one to say evolution cause i have evolution on my valve cover. I really want one to say Mitsubishi but if it came to it i could deal with one that looks like the 9 with just the diamond.