R/T Tuning and my Experience - TriStateTuners.com :: Home of Tristate Auto Enthusiast

ThatTealHatch · 09-18-2008, 03:31 PM

Dropped my car off on tuesday. Met everyone Matt, Shawn, Vince, everyone was very friendly, very clean shop. Vince has been very good at letting me know the status of my car up until now, and i thank him very much for that. Ill keep you guys posted and let yas know the outcome, but so far so good!

TalonTsi97 · 09-18-2008, 03:58 PM

Should of let me know If your getting it tuned on the dyno i would like to come by check it out and take some videos. Good luck with everything, cant wait to see it on the streets.

ThatTealHatch · 09-18-2008, 04:03 PM

well when vince gives me the exact date i hope to make it up there as well. but its still up in the air as of now

SpendOne · 09-18-2008, 04:55 PM

Glad to hear that you made a decision. Hope everything works out for ya. Get that turd on the road.

alwaysinboost · 09-18-2008, 04:58 PM

which one is yours and what are you having done?

SUB2.5RS · 09-18-2008, 09:35 PM

Cant wait dude. I hope it comes out strong. This man put alot of hard work into his car. He deserves it already.

ThatTealHatch · 09-20-2008, 09:19 AM

Quote:

Originally Posted by SpendOne

Glad to hear that you made a decision. Hope everything works out for ya. Get that turd on the road.

i hope so, im hearign nothing but good things from Vince so i hope to have it out next weekend!

Quote:

Originally Posted by alwaysinboost

which one is yours and what are you having done?

teal eg hatch, full tune 3" test pipe

Quote:

Originally Posted by SUB2.5RS

Cant wait dude. I hope it comes out strong. This man put alot of hard work into his car. He deserves it already.

thanks brady, you deserve yours too! hope we get them out at the same time!

omgjacki · 09-20-2008, 11:20 AM

Can't wait until you finally get it back. It's been sitting too long!

ThatTealHatch · 09-24-2008, 09:05 AM

Went up to RT on monday, shot the **** with vince a little bit. I must say that if you need any fabrication done, piping, welding anything along those lines, i HIGHLY recommend Nate Dogg creations

. Cars supposed to go on the dyno today so i look forward to hearign from Vince and maybe making the trip up there.

JSpecV03 · 09-24-2008, 09:47 AM

i was there yesterday picking up some parts i ordered, i musta seen it, what color was it?

edit: nvm...i read up and found it. good choice with picking a shop to have your work done. i woudlnt go anywhere else.

TalonTsi97 · 09-24-2008, 09:51 AM

Quote:

Originally Posted by egmatt93

Went up to RT on monday, shot the **** with vince a little bit. I must say that if you need any fabrication done, piping, welding anything along those lines, i HIGHLY recommend Nate Dogg creations

. Cars supposed to go on the dyno today so i look forward to hearign from Vince and maybe making the trip up there.

dude its your car, you should definitely be there for the dyno. If i wasn't in school all day I'd swing by myself. Good luck, hope everything goes good.

ThatTealHatch · 09-24-2008, 09:59 AM

i know chip im stuck at work, but if i get a exact time ill just bounce

pinacup7 · 09-24-2008, 07:47 PM

Good **** matt. I bet Dave and rob are happy they have there extra bay back now. Congrats on finishing it up. Post how much it makes

ThatTealHatch · 09-25-2008, 09:13 AM

Quote:

Originally Posted by pinacup7

Good **** matt. I bet Dave and rob are happy they have there extra bay back now. Congrats on finishing it up. Post how much it makes

haha rob wanted to hold it in and act happy but he will miss seeing it, i will for sure

ThatTealHatch · 09-29-2008, 09:29 AM

Cars runnig great, made some decent power, i just have a few kinks to work out and i want to put some miles on it before i go back for a final tune.

Matt@R/Ttuning · 10-02-2008, 10:40 AM

hey matt we have your cover i am goign to get it shipped out today.

matt

ThatTealHatch · 10-02-2008, 11:21 AM

thanks brotha! im working on putting miles on this thing and getting injectors to come back for the final!

Matt@R/Ttuning · 10-06-2008, 12:15 PM

Let Us know when you are ready to rock matt. I am sure she has more power lurking under the hood.

ThatTealHatch · 10-06-2008, 12:54 PM

just waiting on $ for bigger injectors and some more dyno time

pinacup7 · 10-06-2008, 06:46 PM

What did it put down? You can pm me if you want

09-18-2008, 03:31 PM	#1
ThatTealHatch Tri-State Addict Join Date: Mar 2008 Location: Philadelphia Member #7110 iTrader: (5)	R/T Tuning and my Experience Dropped my car off on tuesday. Met everyone Matt, Shawn, Vince, everyone was very friendly, very clean shop. Vince has been very good at letting me know the status of my car up until now, and i thank him very much for that. Ill keep you guys posted and let yas know the outcome, but so far so good! Last edited by ThatTealHatch; 10-23-2008 at 11:23 AM.

09-18-2008, 03:58 PM	#2
TalonTsi97 TST Ruined My Life! Join Date: Jan 2005 Member #136 My Ride: 1997 Eagle Talon iTrader: (21)	Should of let me know If your getting it tuned on the dyno i would like to come by check it out and take some videos. Good luck with everything, cant wait to see it on the streets. __________________ 1997 Eagle Talon Tsi To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Updated weekly with Dyno, Track, AutoX, Street, and Event videos. Big updates coming soon! To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

09-18-2008, 04:55 PM	#4
SpendOne Tri-State Post Whore Join Date: Feb 2005 Location: NE Philly Member #144 My Ride: 1987 Mazda RX7 LQ4 Turbo iTrader: (6)	Glad to hear that you made a decision. Hope everything works out for ya. Get that turd on the road. __________________ 1993 GSX - 10.8@135 Stock motor & Trans - SOLD 1987 Mazda RX7 Single turbo LQ4 - 9.2@150 - SOLD 1980 Ford Fairmont 4Dr LQ4 Turbo AGAIN

09-20-2008, 11:20 AM	#8
omgjacki Tri-State Post Whore Join Date: Sep 2007 Location: Gilbertsville, PA Member #5869 My Ride: 2018 CX-5 GT Premium, 2018 Honda Grom iTrader: (4)	Can't wait until you finally get it back. It's been sitting too long! __________________ Ryan M. Sherwood September 9, 1985 - October 7, 2009

09-24-2008, 09:05 AM	#9
ThatTealHatch Tri-State Addict Join Date: Mar 2008 Location: Philadelphia Member #7110 iTrader: (5)	Went up to RT on monday, shot the **** with vince a little bit. I must say that if you need any fabrication done, piping, welding anything along those lines, i HIGHLY recommend Nate Dogg creations. Cars supposed to go on the dyno today so i look forward to hearign from Vince and maybe making the trip up there.

09-18-2008, 04:03 PM	#3
ThatTealHatch Tri-State Addict Join Date: Mar 2008 Location: Philadelphia Member #7110 iTrader: (5)	well when vince gives me the exact date i hope to make it up there as well. but its still up in the air as of now

09-18-2008, 04:58 PM	#5
alwaysinboost Tri-State Post Whore Join Date: Feb 2006 Location: still at work Member #1454 My Ride: 04 EVO Wrecked by Oakes Detailing iTrader: (0)	which one is yours and what are you having done?

09-18-2008, 09:35 PM	#6
SUB2.5RS Tri-State Addict Join Date: Aug 2005 Location: Philadephia Member #697 My Ride: 2.5RS , 89 Supra turbo , 93 240SX coupe (SOLD), 96 Legacy iTrader: (3)	Cant wait dude. I hope it comes out strong. This man put alot of hard work into his car. He deserves it already.

09-24-2008, 09:47 AM	#10
JSpecV03 Tri-State Post Whore Join Date: Nov 2007 Location: Lansdale, Pa Member #6345 My Ride: 2006 Acura TSX,1996 Jeep Cherokee Sport 4x4 4.0, and cammed out Spec V with a blown motor. iTrader: (1)	i was there yesterday picking up some parts i ordered, i musta seen it, what color was it? edit: nvm...i read up and found it. good choice with picking a shop to have your work done. i woudlnt go anywhere else. __________________ 1996 Jeep Cherokee Sport 4x4 4.0 work horse 2003 Nissan Sentra Se-R Spec V, needs a motor. 2006 Acura TSX, soon to be low and slow. Every Nasty Vehical Illustrates Our Useless Spending Last edited by JSpecV03; 09-24-2008 at 09:49 AM.

09-24-2008, 09:59 AM	#12
ThatTealHatch Tri-State Addict Join Date: Mar 2008 Location: Philadelphia Member #7110 iTrader: (5)	i know chip im stuck at work, but if i get a exact time ill just bounce

09-24-2008, 07:47 PM	#13
pinacup7 Tri-State Addict Join Date: Apr 2006 Location: Under a hood Member #1764 My Ride: Baaaaahd GTO iTrader: (0)	Good **** matt. I bet Dave and rob are happy they have there extra bay back now. Congrats on finishing it up. Post how much it makes Last edited by pinacup7; 09-24-2008 at 10:06 PM.

09-29-2008, 09:29 AM	#15
ThatTealHatch Tri-State Addict Join Date: Mar 2008 Location: Philadelphia Member #7110 iTrader: (5)	Cars runnig great, made some decent power, i just have a few kinks to work out and i want to put some miles on it before i go back for a final tune.

10-02-2008, 10:40 AM	#16
Matt@R/Ttuning Tri-State Aficionado Join Date: Mar 2008 Member #7252 My Ride: 1985 corolla GTS iTrader: (0)	hey matt we have your cover i am goign to get it shipped out today. matt

10-02-2008, 11:21 AM	#17
ThatTealHatch Tri-State Addict Join Date: Mar 2008 Location: Philadelphia Member #7110 iTrader: (5)	thanks brotha! im working on putting miles on this thing and getting injectors to come back for the final!

10-06-2008, 12:15 PM	#18
Matt@R/Ttuning Tri-State Aficionado Join Date: Mar 2008 Member #7252 My Ride: 1985 corolla GTS iTrader: (0)	Let Us know when you are ready to rock matt. I am sure she has more power lurking under the hood.

10-06-2008, 12:54 PM	#19
ThatTealHatch Tri-State Addict Join Date: Mar 2008 Location: Philadelphia Member #7110 iTrader: (5)	just waiting on $ for bigger injectors and some more dyno time

10-06-2008, 06:46 PM	#20
pinacup7 Tri-State Addict Join Date: Apr 2006 Location: Under a hood Member #1764 My Ride: Baaaaahd GTO iTrader: (0)	What did it put down? You can pm me if you want

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tuning and Datalogging for your 2006+ Honda Civic at R/T Tuning	PaleDSM	(Past Vendors)	23	09-11-2012 10:44 AM
PSI Motorsports... Great Experience! Great Dyno-tuning	Seven	Parts and Vendor Reviews	0	08-09-2009 10:52 PM
RT Tuning best shop experience yet	JSpecV03	(Past Vendors)	2	09-24-2008 09:57 AM
JNZ Tuning DSM Fuel and Tuning package deals!	JNZTuning	(Past Vendors)	0	03-19-2008 12:32 PM
TurboTek Tuning Stage 1 and 2 plus custom tuning Info	RayArroyo	(Past Vendors)	24	01-17-2008 02:32 PM