I need custom IC pipes fab'd for my wrx. - TriStateTuners.com :: Home of Tristate Auto Enthusiast

karl · 04-29-2008, 09:15 PM

hey guys, i got a 04 wrx that im going to be reversing my intake manifold. im also going to be clocking my turbo to make the ic pipe route better.

here is basically what im looking for. my turbo is not gonna be clocked and rotated exactly like this though.

this is how turbo is gonna be.

This is also how it will be except im keeping my alternator.
http://forums.nasioc.com/forums/show...0&postcount=43

so to sum it all up, the first pic is how my alternator is gonna be, and the link is how my turbo is gonna look. so combine the two and thats what i need. Everything will be done besides the pipes, obviously. any idea how much that would cost me?

Verocious · 04-30-2008, 10:47 AM

What hood are you going to use with the setup?

Andy

karl · 04-30-2008, 04:43 PM

it would be stock hood. i imagine a bit of the underside is gonna have to be trimmed a little.

Verocious · 05-01-2008, 11:22 AM

Normally a stock WRX or STi hood will give more clearance than an RS hood would. The RS hood has some reinforcement right where the piping connects to the throttle body and can be a bit a bit of a bear to clear. So there should not have to be too much trimming of the hood.

Parts to fab the piping would be approx $350. That included piping, couplers, bends, filler rod and gas. Labor would be about $450.

Andy

04-29-2008, 09:15 PM	#1
karl Tri-State Post Whore Join Date: Dec 2004 Location: Medford, nj Member #28 My Ride: 04 WRX/ 10 STI SE WRBs iTrader: (1)	I need custom IC pipes fab'd for my wrx. hey guys, i got a 04 wrx that im going to be reversing my intake manifold. im also going to be clocking my turbo to make the ic pipe route better. here is basically what im looking for. my turbo is not gonna be clocked and rotated exactly like this though. this is how turbo is gonna be. This is also how it will be except im keeping my alternator. http://forums.nasioc.com/forums/show...0&postcount=43 so to sum it all up, the first pic is how my alternator is gonna be, and the link is how my turbo is gonna look. so combine the two and thats what i need. Everything will be done besides the pipes, obviously. any idea how much that would cost me? __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Nikon D80, 18-70, 70-300

04-30-2008, 10:47 AM	#2
Verocious Vendor Join Date: Mar 2007 Location: Wilmington, DE Member #3950 iTrader: (0)	What hood are you going to use with the setup? Andy __________________ Verocious Motorsports 818C S. Heald St. Wilmington, DE 19801 p: 302.472.8888 (local) p: 877-VMS-1320 (toll free) e: To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Shop online at: To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

04-30-2008, 04:43 PM	#3
karl Tri-State Post Whore Join Date: Dec 2004 Location: Medford, nj Member #28 My Ride: 04 WRX/ 10 STI SE WRBs iTrader: (1)	it would be stock hood. i imagine a bit of the underside is gonna have to be trimmed a little. __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Nikon D80, 18-70, 70-300

05-01-2008, 11:22 AM	#4
Verocious Vendor Join Date: Mar 2007 Location: Wilmington, DE Member #3950 iTrader: (0)	Normally a stock WRX or STi hood will give more clearance than an RS hood would. The RS hood has some reinforcement right where the piping connects to the throttle body and can be a bit a bit of a bear to clear. So there should not have to be too much trimming of the hood. Parts to fab the piping would be approx $350. That included piping, couplers, bends, filler rod and gas. Labor would be about $450. Andy __________________ Verocious Motorsports 818C S. Heald St. Wilmington, DE 19801 p: 302.472.8888 (local) p: 877-VMS-1320 (toll free) e: To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Shop online at: To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I need custom IC pipes fab'd for my wrx.	karl	(Past Vendors)	8	05-10-2008 01:40 PM
I need custom IC pipes fab'd for my wrx.	karl	[TST] Vendors	6	04-30-2008 07:32 AM
I need custom IC pipes fab'd for my wrx.	karl	(Past Vendors)	0	04-29-2008 09:24 PM