need some ic pipes made - TriStateTuners.com :: Home of Tristate Auto Enthusiast

karl · 04-29-2008, 09:08 PM

hey guys, i got a 04 wrx that im going to be reversing my intake manifold, so the throttle body will be facing the front of my car. im also going to be clocking my turbo to make the ic pipe route better.

here is basically what im looking for. my turbo is not gonna be clocked and rotated exactly like this though.

this is how turbo is gonna be.

This is also how it will be except im keeping my alternator.
http://forums.nasioc.com/forums/show...0&postcount=43

so to sum it all up, the first pic is how my alternator is gonna be, and the link is how my turbo is gonna look. so combine the two and thats what i need. Everything will be done besides the pipes, obviously. any idea how much that would cost me?

Rev. Maynard · 04-29-2008, 09:52 PM

Your best bet would be to call them. They're always so busy I don't know how much time either Jim or Brent would have to check this site.

91TSiGuy · 05-14-2008, 10:35 PM

Definitely give the shop a call between 10am and 1pm for your best chance of getting Jim on the phone to give you the best round about estimate for what you need done. He knows roughly what jobs like that in the past have cost so he can tell you what the labor and materials will most likely come to.

04-29-2008, 09:08 PM	#1
karl Tri-State Post Whore Join Date: Dec 2004 Location: Medford, nj Member #28 My Ride: 04 WRX/ 10 STI SE WRBs iTrader: (1)	need some ic pipes made hey guys, i got a 04 wrx that im going to be reversing my intake manifold, so the throttle body will be facing the front of my car. im also going to be clocking my turbo to make the ic pipe route better. here is basically what im looking for. my turbo is not gonna be clocked and rotated exactly like this though. this is how turbo is gonna be. This is also how it will be except im keeping my alternator. http://forums.nasioc.com/forums/show...0&postcount=43 so to sum it all up, the first pic is how my alternator is gonna be, and the link is how my turbo is gonna look. so combine the two and thats what i need. Everything will be done besides the pipes, obviously. any idea how much that would cost me? __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Nikon D80, 18-70, 70-300 Last edited by karl; 04-29-2008 at 09:13 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
red nsx with straight pipes	huckaboo	Spotted!	6	03-24-2010 09:59 AM
I need custom IC pipes fab'd for my wrx.	karl	(Past Vendors)	3	05-01-2008 11:22 AM
Intercooler pipes	eviltalon	(Past Vendors)	0	04-24-2006 10:18 AM

04-29-2008, 09:52 PM	#2
Rev. Maynard Tri-State Aficionado Join Date: Jun 2005 Location: Lansdale Member #578 My Ride: 92 BMW E34 iTrader: (1)	Your best bet would be to call them. They're always so busy I don't know how much time either Jim or Brent would have to check this site.

05-14-2008, 10:35 PM	#3
91TSiGuy Tri-State Aficionado Join Date: Feb 2007 Location: Ephrata, PA Member #3637 My Ride: 91 Talon awd iTrader: (1)	Definitely give the shop a call between 10am and 1pm for your best chance of getting Jim on the phone to give you the best round about estimate for what you need done. He knows roughly what jobs like that in the past have cost so he can tell you what the labor and materials will most likely come to.