How much power are you making? - TriStateTuners.com :: Home of Tristate Auto Enthusiast

VtechISfun · 02-22-2008, 02:50 AM

I'm putting down 330awhp and 333 tourque (thanx to the guys over at TurboTrix for doing such a great job)

I made those numbers on 23psi and 93octane fuel.... just have some normal bolt-ons and stock clutch

not too bad considering there was a person who made 350awhp on 24psi and a 20g turbo

i wonder who did his tune... lol

I thought it would be a good idea to start this just to get a feel for what kinda numbers people r putting out around the area... see

what the competition is like

Rey The Great · 02-22-2008, 02:51 AM

wrong section..and something similar to this thread already been posted

DPancoast · 02-22-2008, 11:49 AM

not necessarily...he's in the philly section....from philly....asking about power.....but yeah...maybe not.

Also...wtf at my bad clutch power curve..

CHAOS · 02-22-2008, 11:58 AM

there was definitely a thread on this exact topic.

NOPSTNS · 02-22-2008, 12:34 PM

yeah but he wants a narrower audience. he just wants to kno if any philly area peeps be rockin some high hp....

so judging by Dpancoast, i am finally not DEAD LAST in the hp department! thanks buddy!

DPancoast · 02-22-2008, 12:45 PM

haha that is with a TERRIBLY bad clutch dude. The videos are embarrassing.

Buster · 02-22-2008, 12:50 PM

No dyno numbers yet but hoping for around 330hp and 300tq. big 16g w/ supporting mods.

NOPSTNS · 02-22-2008, 01:02 PM

Quote:

Originally Posted by DPancoast

haha that is with a TERRIBLY bad clutch dude. The videos are embarrassing.

oh......

well in that case.....

VtechISfun · 02-22-2008, 03:27 PM

Quote:

Originally Posted by Buster

No dyno numbers yet but hoping for around 330hp and 300tq. big 16g w/ supporting mods.

Sounds pretty good.... don't go blowin a tran though

i hear those wrx trannys r pretty weak

Buster · 02-22-2008, 03:39 PM

Quote:

Originally Posted by VtechISfun

Sounds pretty good.... don't go blowin a tran though

i hear those wrx trannys r pretty weak

<--- whos on number 3? this guy! LOL... not funny

The trannies themselves arent that bad, it depends on the conditions.
My first one broke because in the 15k miles I had it i put probably 100+ launches on it practicing and ****. It just sheared 1st gear though.

My last one broke about 2 weeks ago and it was probably a stress thing from just 2 years of hard pulls. It only chipped off 2 teeth on the pinon gear.

The new one is getting nothing but 55 mph and 4k shifts LOL, until I can get the onther one PPG'd

underpressure02 · 02-22-2008, 05:33 PM

I put down 505 on my bone stock ls/vtec at 22psi with a gt40r on a mustang dyno.

My built motor is putting out a little bit more then that.

Mach1 · 02-22-2008, 05:54 PM

300/332...about 5 bolt-ons short of full bolt-on. Looking for 340-350 with out opening my heads or spray...then I'm popping on the Eaton.

DPancoast · 02-22-2008, 07:32 PM

Quote:

Originally Posted by underpressure02

I put down 505 on my bone stock ls/vtec at 22psi with a gt40r on a mustang dyno.

My built motor is putting out a little bit more then that.

wowzers.

Quote:

Originally Posted by NOPSTNS

oh......

well in that case.....

haha who knows dude. Once my exhaust gets done this week, I'm going back to get new numbers. I might still be below you haha.

PAFirefighter11 · 02-22-2008, 09:53 PM

Figure stock, the engine is underrated from the factory and typically produce 310hp / 340tq. I've got a few good hp gainers and running a full second faster than my car stock, so I have no idea where I am. I do mean to get it dyno'd soon. I just had a tune and need to drop to a 160* t-stat now as well. Can't wait to get the numbers on this one.

SovXietday · 02-22-2008, 11:11 PM

Don't know yet, but won't be adequate until I'm over 400. This is in the Honda btw.

Camaro is stock LS1 whatever that does. Probably low 300s.

VtechISfun · 02-22-2008, 11:22 PM

Quote:

Originally Posted by underpressure02

I put down 505 on my bone stock ls/vtec at 22psi with a gt40r on a mustang dyno.

My built motor is putting out a little bit more then that.

wow dude that's insanity i would love to feel something like that one day ... boosted honda's r like sex except it needs the right partner lol... please don't slaughter me for my terrible

attempt at a joke

but seriously though that's pretty disgusting man

Quote:

Originally Posted by DPancoast

wowzers.

haha who knows dude. Once my exhaust gets done this week, I'm going back to get new numbers. I might still be below you haha.

lol please tell me u'll have a new clutch in before u go in for another try

wrx-auto-x · 02-22-2008, 11:35 PM

02 wrx bugeye about 295hp at 16.86psi. no dyno yet but i know that a cobb stage 2 makes 285hp/285tq at 15.8psi so i am estimating my numbers. but not too bad for just a 3" tbe ,short ram intake, and open source tuned stage 2 map.

rich_price · 02-24-2008, 09:43 PM

368 rwhp / 365 rw torque .. bone stock ( 2006 LS2 GTO ) .. I can post up a dyno chart as soon as I have more than 3 posts ( TST n00b)

vdcoff · 02-24-2008, 09:57 PM

224 whp / No torque number yet

SovXietday · 02-24-2008, 10:03 PM

Quote:

Originally Posted by DPancoast

Toyota features the new engine in the MR2, once reaching redline, it realizes "wtf was I doing" and goes backwards to create max power. Only available in slipping clutch models.

02-22-2008, 02:50 AM	#1
VtechISfun Tri-State Training Wheels Join Date: Feb 2008 Location: NE Philly Member #6981 My Ride: 06' Apex Silver Evo IX iTrader: (0)	How much power are you making? I'm putting down 330awhp and 333 tourque (thanx to the guys over at TurboTrix for doing such a great job) I made those numbers on 23psi and 93octane fuel.... just have some normal bolt-ons and stock clutch not too bad considering there was a person who made 350awhp on 24psi and a 20g turbo i wonder who did his tune... lol I thought it would be a good idea to start this just to get a feel for what kinda numbers people r putting out around the area... see what the competition is like

02-22-2008, 02:51 AM	#2
Rey The Great Tri-State Addict Join Date: Mar 2007 Location: lancaster, PA Member #3905 My Ride: scooby iTrader: (0)	wrong section..and something similar to this thread already been posted __________________ I'm a beast, you just a pet.

02-22-2008, 12:50 PM	#7
Buster TST Ruined My Life! Join Date: May 2005 Location: Holland Pa Member #449 My Ride: 2008 Mustang GT/CS iTrader: (3)	No dyno numbers yet but hoping for around 330hp and 300tq. big 16g w/ supporting mods. __________________ III To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

02-22-2008, 05:33 PM	#11
underpressure02 Tri-State Post Whore Join Date: Jul 2005 Member #645 iTrader: (0)	I put down 505 on my bone stock ls/vtec at 22psi with a gt40r on a mustang dyno. My built motor is putting out a little bit more then that. __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Northeast Drag Racing Club/Performance Parts Webstore

02-22-2008, 05:54 PM	#12
Mach1 Tri-State Addict Join Date: May 2007 Location: Delco, PA Member #4603 My Ride: 2014 Altima S iTrader: (0)	300/332...about 5 bolt-ons short of full bolt-on. Looking for 340-350 with out opening my heads or spray...then I'm popping on the Eaton. __________________ Present: 2018 Q50 RED SPORT 400 AWD JB1 - 20% Tint Past: 1991 Taurus GL, 2001 Escort ZX2, 2000 Escort ZX2 S/R, 2003 Mach1, 2014 Altima 2.5 S Last edited by Mach1; 02-22-2008 at 06:01 PM.

02-22-2008, 11:58 AM	#4
CHAOS TST Ruined My Life! Banned Join Date: Jun 2006 Member #2120 My Ride: 1984 Cadillac Brougham iTrader: (1)	there was definitely a thread on this exact topic.

02-22-2008, 12:34 PM	#5
NOPSTNS Tri-State Post Whore Join Date: Dec 2006 Location: Los Angeles, CA Member #3176 iTrader: (0)	yeah but he wants a narrower audience. he just wants to kno if any philly area peeps be rockin some high hp.... so judging by Dpancoast, i am finally not DEAD LAST in the hp department! thanks buddy!

02-22-2008, 11:35 PM	#17
wrx-auto-x Tri-State Training Wheels Join Date: Jun 2007 Location: Erie, PA Member #5071 My Ride: 2002 Subaru WRX Sedan iTrader: (0)	02 wrx bugeye about 295hp at 16.86psi. no dyno yet but i know that a cobb stage 2 makes 285hp/285tq at 15.8psi so i am estimating my numbers. but not too bad for just a 3" tbe ,short ram intake, and open source tuned stage 2 map.

02-24-2008, 09:43 PM	#18
rich_price Noob-Jersey Join Date: Sep 2007 Member #5849 iTrader: (0)	368 rwhp / 365 rw torque .. bone stock ( 2006 LS2 GTO ) .. I can post up a dyno chart as soon as I have more than 3 posts ( TST n00b)

02-24-2008, 09:57 PM	#19
vdcoff Tri-State Post Whore Join Date: Feb 2008 Location: Nazareth, PA Member #6984 My Ride: 2011 Impreza WRX Ltd / 2012 Yamaha FZ8 iTrader: (1)	224 whp / No torque number yet

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Making Power	BigWhiteTodd	Honda / Acura Talk	72	01-21-2009 10:56 PM
Making jokes and making fun of drifting240sx	JDMTyler3326	Upcoming Events	48	11-10-2008 07:23 PM
Making to much power for your clutch? ACT is here to save you.	S.Milone	(Past Vendors)	0	04-11-2007 04:44 PM
Making real power w/ my Civic - Nitrous, Turbo, or Swap?	CleanNeon98	Engine Performance	57	03-28-2007 10:08 AM
Turbo Mustang Making Lots of Power	HickRocket1258	Gallery	29	09-06-2006 09:06 PM