1985 RX7 Drag car - TriStateTuners.com :: Home of Tristate Auto Enthusiast

Epic Tuning · 09-19-2007, 10:37 AM

Street legal drag car. This rx7 was clean to begin with and got just about everything but new paint. The engine was a rebuilt and ported turbo II engine. The exhaust manifold was built for this car as for was the rest of the turbo system. A rare J-TEC intake manifold with six injectors was added and the car was running on a Haltech engine managment. The interior was refinished as long as carbon fiber dash panels were made to house all the gauges. The car has a 4 link rear and a 8.8 Ford rear end with Strange products installed including the rear braking system.

Silverfc88 · 09-19-2007, 02:23 PM

Wow, nice car! What turbo are you running on it and what boost pressures do you plan to run? What size are the injectors?

Epic Tuning · 09-19-2007, 04:22 PM

The turbo is a T66 P-trim with .96 turbine housing. The injectors are two 550cc and four 1600cc. It ran at 25psi. We never had it on the dyno though. Every time we would go some thing would come up. You know how they are.

antman0408 · 09-19-2007, 04:45 PM

Did you make the exhaust manifold? If you did, how much would you charge to make one for a 87 rx7?

Epic Tuning · 09-19-2007, 04:58 PM

Yeah we did. For a similar one it would cost around $1000. We will build it how ever you wanted.

peteyturbo · 09-19-2007, 05:34 PM

Nice, I have a similar project myself..I'm interested in knowing how much the rear setup cost minus the actual 8.8..Also, who built the engine and what are the specs on it?? I have a series 4 turbo engine that needs a rebuild for my 85 SE..

Epic Tuning · 09-19-2007, 06:06 PM

The entire rear project was like 4k. The engine was a turbo II street ported and atkins seals.

09-19-2007, 10:37 AM	#1
Epic Tuning Former Vendor Join Date: Aug 2007 Location: Allentown, PA Member #5610 iTrader: (1)	1985 RX7 Drag car Street legal drag car. This rx7 was clean to begin with and got just about everything but new paint. The engine was a rebuilt and ported turbo II engine. The exhaust manifold was built for this car as for was the rest of the turbo system. A rare J-TEC intake manifold with six injectors was added and the car was running on a Haltech engine managment. The interior was refinished as long as carbon fiber dash panels were made to house all the gauges. The car has a 4 link rear and a 8.8 Ford rear end with Strange products installed including the rear braking system.

09-19-2007, 02:23 PM	#2
Silverfc88 Tri-State Post Whore Join Date: Jan 2005 Location: NorCal Member #126 My Ride: 88 RX7 TII, 2012 WRX hatch iTrader: (5)	Wow, nice car! What turbo are you running on it and what boost pressures do you plan to run? What size are the injectors? __________________ formerly 95nracer Instagram @Silverfc88 11.6@123mph Streetport 13bt, Haltech Sprint RE, FIC 1150cc + Delphi 1000cc injectors, Walbro 255, Borg Warner s360 .88, HKS mani, JGS 50mm, Greddy FMIC, HKS Twin Power, AEM water/meth inj

09-19-2007, 05:34 PM	#6
peteyturbo Tri-State Post Whore Join Date: Feb 2006 Location: NE Phila. Member #1450 iTrader: (0)	Nice, I have a similar project myself..I'm interested in knowing how much the rear setup cost minus the actual 8.8..Also, who built the engine and what are the specs on it?? I have a series 4 turbo engine that needs a rebuild for my 85 SE.. __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1985 G60 Gti	Epic Tuning	(Past Vendors)	11	09-19-2007 06:17 PM

09-19-2007, 04:22 PM	#3
Epic Tuning Former Vendor Join Date: Aug 2007 Location: Allentown, PA Member #5610 iTrader: (1)	The turbo is a T66 P-trim with .96 turbine housing. The injectors are two 550cc and four 1600cc. It ran at 25psi. We never had it on the dyno though. Every time we would go some thing would come up. You know how they are.

09-19-2007, 04:45 PM	#4
antman0408 Tri-State Aficionado Join Date: Jan 2006 Location: west chester PA Member #1337 iTrader: (2)	Did you make the exhaust manifold? If you did, how much would you charge to make one for a 87 rx7?

09-19-2007, 04:58 PM	#5
Epic Tuning Former Vendor Join Date: Aug 2007 Location: Allentown, PA Member #5610 iTrader: (1)	Yeah we did. For a similar one it would cost around $1000. We will build it how ever you wanted.

09-19-2007, 06:06 PM	#7
Epic Tuning Former Vendor Join Date: Aug 2007 Location: Allentown, PA Member #5610 iTrader: (1)	The entire rear project was like 4k. The engine was a turbo II street ported and atkins seals.