Retrofitter - TriStateTuners.com :: Home of Tristate Auto Enthusiast

2ND_GEN_2001 · 12-22-2014, 08:08 PM

Looking for a retrofitter or at least someone to help pull my lights off so I can give them to someone to reseal for me. Prefer someone that could do both but anything helps.
Let me know thanks in advance

enohand · 12-23-2014, 03:43 PM

you could check out HID planet alot of those guys farm their services out.

I would help , but im extremley busy working on my retro & car build...all my **** is on my vacum table at the moment.

drive side is stock style. pass is my retro 40% done.. (no front cover on the light though & no lenses covering the projectors in the pic)

2ND_GEN_2001 · 12-23-2014, 06:39 PM

Thanks for the offer, I figured I would get a little better response on here. But I will check out hidplanet. I may have a shop give me a hand if all else fails, The other thing with hidplanet some people aren't in the area and I cannot afford to ship the lights and wait its my daily lol..

enohand · 12-26-2014, 11:28 AM

buy a spare set....

its not a good idea to try a retro on your only set of lights...paint, epoxy, etc all take time to dry/cure

2ND_GEN_2001 · 12-29-2014, 05:06 AM

I only need a reseal on the current lights they are retro already

probevette · 12-30-2014, 09:41 PM

Where are you located? Visionz light mods is in NEPA

2ND_GEN_2001 · 01-01-2015, 04:02 PM

I am in Chester county philly burbs.

12-22-2014, 08:08 PM	#1
2ND_GEN_2001 Tri-State Aficionado Join Date: Oct 2009 Member #14781 My Ride: 01NissanAltima GLE iTrader: (0)	Retrofitter Looking for a retrofitter or at least someone to help pull my lights off so I can give them to someone to reseal for me. Prefer someone that could do both but anything helps. Let me know thanks in advance

12-30-2014, 09:41 PM	#6
probevette Tri-State Addict Join Date: Jul 2007 Location: Poconos PA Member #5313 My Ride: Slow Audi's iTrader: (2)	Where are you located? Visionz light mods is in NEPA __________________ Greenway's Car Care Products DipFactory CarbonWerkz

12-23-2014, 03:43 PM	#2
enohand Tri-State Addict Join Date: Sep 2006 Location: L-town Member #2644 My Ride: 1996 p10 iTrader: (3)	you could check out HID planet alot of those guys farm their services out. I would help , but im extremley busy working on my retro & car build...all my **** is on my vacum table at the moment. drive side is stock style. pass is my retro 40% done.. (no front cover on the light though & no lenses covering the projectors in the pic)

12-23-2014, 06:39 PM	#3
2ND_GEN_2001 Tri-State Aficionado Join Date: Oct 2009 Member #14781 My Ride: 01NissanAltima GLE iTrader: (0)	Thanks for the offer, I figured I would get a little better response on here. But I will check out hidplanet. I may have a shop give me a hand if all else fails, The other thing with hidplanet some people aren't in the area and I cannot afford to ship the lights and wait its my daily lol..

12-26-2014, 11:28 AM	#4
enohand Tri-State Addict Join Date: Sep 2006 Location: L-town Member #2644 My Ride: 1996 p10 iTrader: (3)	buy a spare set.... its not a good idea to try a retro on your only set of lights...paint, epoxy, etc all take time to dry/cure

12-29-2014, 05:06 AM	#5
2ND_GEN_2001 Tri-State Aficionado Join Date: Oct 2009 Member #14781 My Ride: 01NissanAltima GLE iTrader: (0)	I only need a reseal on the current lights they are retro already

01-01-2015, 04:02 PM	#7
2ND_GEN_2001 Tri-State Aficionado Join Date: Oct 2009 Member #14781 My Ride: 01NissanAltima GLE iTrader: (0)	I am in Chester county philly burbs.