One week GSC Power Division Sale at R/T Tuning! - TriStateTuners.com :: Home of Tristate Auto Enthusiast

Erik@R/TTuning · 08-24-2011, 01:41 PM

CAMS!!! VALVE SPRINGS!!! RETAINERS!!!

MAJOR DISCOUNTS on ALL GSC components until 8/30/11 @ 5:00pm. PM, Call (215-855-5565), or Email me (Erik@rttuning.com) for any questions, availability, or to order.

NISSAN SR20DET
#6040S1 STAGE 1 CAMS 268/270 $490
GSC Power-Division S1 cams for the Nissan SR20 S13/S14 non Variable engine. The S1 cams are designed for those running an upgraded turbo such as a GT25R to a GT3076. These cams will not have bottom end losses over stock cams; nothing but gains and will promote an extremly flat torque curve. Gains of 30-50whp (depending on Turbo) have been seen by simply bolting the S1 cams in and reshimming. Designed for a rev range of 3000-8000rpms, these cams require a single valve spring upgrade over stock. 300-500whp camshaft set with an idle slightly ruffer than stock.
#6040S2 STAGE 2 CAMS 275/275 $490
GSC Power-Division S2 cams for the Nissan SR20 S13/S14 non Variable engine. The S2 cams are designed for those running an upgraded turbo such as a GT35R. These cams will not have bottom end losses over S1 cams; nothing but gains and will promote an extremly flat torque curve. Gains of 50-70whp (depending on Turbo) have been seen by simply bolting the S2 cams in and reshimming. Designed for a rev range of 4000-9000rpms, these cams require valve spring upgrades. 475-750whp camshaft set with a ruff idle.

#5051 SPRINGS & RETAINERS $290
GSC Power-Division Valve Spring kit with Titanium Retainers. 90 Lbs @ Seat and 190Lbs @ .400"

TOYOTA 2JZ-GTE
#6030S1 STAGE 1 CAMS 269/269 $775
GSC Power-Division S1 cams for the Toyota Supra 2JZ-GTE. The S1 cams are designed for those running an upgraded single turbo larger than 57mm. These cams will not have bottom end losses over stock cams; nothing but gains and will promote an extremely flat torque curve. Gains of 40-70whp (depending on Turbo) have been seen by simply bolting the S1 cams in and reshimming. Designed for a rev range of 3500-8000rpms, these cams require a single valve spring upgrade over stock. 450-800whp camshaft set with an idle slightly rougher than stock.
#6030S2 STAGE 2 CAMS 274/274 $775
GSC Power-Division S2 cams for the Toyota Supra 2JZ-GTE. The S2 cams are designed for those running a large single turbo, larger than 71mm. These cams will not have bottom end losses over our S1 cams; nothing but gains will be seen and will promote great peak power gains. Gains of 60-100whp (depending on Turbo) have been seen by simply bolting the S2 cams in and reshimming. Designed for a rev range of 4000-8500rpms, these cams require upgraded valve spring, but can be run on stock cylinder heads. 800-1100whp camshaft set with a ruffer than stock idle.
#6030S3 STAGE 3 CAMS 290/290 $775
1000+ HP applications running anything from Methanol, NO2 or 45+psi. Call for more details. This is a serious cam for serious horsepower.

#5044 SPRINGS & RETAINERS $515
GSC Power-Division Beehive springs feature some of the most impressive manufacturing techniques in the industry. Our beehive spring uses an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. What this means to you is our spring has the highest level of spring load retention while still maintaining good fatigue threw out the life of the spring. Only the best materials go into the GSC Power-Division Beehive valve spring. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness.
The beehive valve spring shape has become the buzz lately. Some have enquired as to the benefits of a beehive spring vs the dual springs that are sold by others. While some might find that the beehive spring design is new it has been used commonly in many OE engines as well as in all of the NASCAR and F1 engines of today. Why? The beehive shape is more stable than standard single or dual cylindrical springs. The beehive design which incorporates an ovate wire is more than capable of the performance demands that were previously only matched by a Dual Springs. With the smaller and lighter retainer used on the beehive valve spring allow for higher RPM and more valve control. So beehive valve springs, with there lighter weight retainers allow for engine's to rev quicker and maintain a more stable valve motion than the traditional cylindrical springs of yesteryear.
The GSC 5044 Beehive valve spring set and Grade 5 Titanium retainers. This kit is capable of 9000+ RPMS, with as much as 11.5mm lift cams. This is a must have for anyone pushing the limits.

NISSAN VQ35DE
#5052 SPRINGS & RETAINERS $430
GSC Power-Division Nissan 350z/G35 VQ35 Single Spring kit with Titanium retainers. 80 Lbs @ Seat and 175Lbs @ .400"

HYUNDAI GENESIS 4B11 THETA
#6060S1 STAGE 1 CAMS 264/264 $590
The GSC Power-Division S1 cams for the Hyundai Genesis Coupe 4B11 Theta are designed for those with the stock turbo up to the 550hp range These cams will not sacrifice any bottom end loss over stock cams; nothing but gains and will promote faster spooling of the upgraded turbos. Gains of 20-50whp (depending on Turbo) have been seen by simply bolting the S1 cams in. Designed for a rev range of 3000-7500rpms, these cams work well on the stock valve springs.
#6060S2 STAGE 2 CAMS 272/270 $590
The GSC Power-Division S2 cams for the Hyundai Genesis Coupe 4B11 Theta are designed for those with 600HP+ in mind. Gains of 40-80whp (depending on Turbo) have been seen by simply bolting the S2 cams in.

#5042 SPRINGS & RETAINERS $345
GSC Power-Division Beehive springs feature some of the most impressive manufacturing techniques in the industry. Our beehive spring uses an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. What this means to you is our spring has the highest level of spring load retention while still maintaining good fatigue threw out the life of the spring. Only the best materials go into the GSC Power-Division Beehive valve spring. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness.
The beehive valve spring shape has become the buzz lately. Some have enquired as to the benefits of a beehive spring vs the dual springs that are sold by others. While some might find that the beehive spring design is new it has been used commonly in many OE engines as well as in all of the NASCAR and F1 engines of today. Why? The beehive shape is more stable than standard single or dual cylindrical springs. The beehive design which incorporates an ovate wire is more than capable of the performance demands that were previously only matched by a Dual Springs. With the smaller and lighter retainer used on the beehive valve spring allow for higher RPM and more valve control. So beehive valve springs, with there lighter weight retainers allow for engine's to rev quicker and maintain a more stable valve motion than the traditional cylindrical springs of yesteryear.
The GSC 5042 Beehive valve spring set, and Grade 5 Titanium retainers. This kit is capable of 9500+ RPMS, with as much as 12mm lift cams.

Erik@R/TTuning · 08-24-2011, 01:41 PM

SUBARU EJ205 NON AVCS (02-05 WRX)
#6020S1 STAGE 1 CAMS 266/266 $790
GSC Power-Division S1 camshafts for the EJ205 WRX Version 5 and 6. These will not drop any low end power, but actually cause faster spool of the turbo, creating more power and torque across the entire rpm range. Good for stock turbo or up to 500WHP(GT35R) upgrades. These cams require upgraded valve springs to keep everything safe at high rpm.
#6020S2 STAGE 2 CAMS 272/272 $790
GSC Power-Division S2 camshafts for the EJ205 WRX Version 5 and 6. These cams are built to suite the high horsepower Subys. With a power range of 500WHP and up, you need some certain mods to utilize the true potential of the S2s. Built motor, with a built/ported head, and a good engine management system. Dual valve springs are recommended, but a upgraded single spring kit will do the job under 8000 rpm.

#5043 SPRINGS & RETAINERS $345
GSC Power-Division Beehive springs feature some of the most impressive manufacturing techniques in the industry. Our beehive spring uses an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. What this means to you is our spring has the highest level of spring load retention while still maintaining good fatigue threw out the life of the spring. Only the best materials go into the GSC Power-Division Beehive valve spring. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness.
The beehive valve spring shape has become the buzz lately. Some have enquired as to the benefits of a beehive spring vs the dual springs that are sold by others. While some might find that the beehive spring design is new it has been used commonly in many OE engines as well as in all of the NASCAR and F1 engines of today. Why? The beehive shape is more stable than standard single or dual cylindrical springs. The beehive design which incorporates an ovate wire is more than capable of the performance demands that were previously only matched by a Dual Springs. With the smaller and lighter retainer used on the beehive valve spring allow for higher RPM and more valve control. So beehive valve springs, with there lighter weight retainers allow for engine's to rev quicker and maintain a more stable valve motion than the traditional cylindrical springs of yesteryear.
The GSC 5043 Beehive valve spring set, and Grade 5 Titanium retainers. This kit is capable of 9500+ RPMS, with as much as 11.5mm lift cams.

SUBARU USDM EJ255 EJ257 WITH AVCS (04-07 STi/06-07 WRX)
#6025S1 STAGE 1 CAMS 268/266 $790
GSC Power-Division S1 camshafts for the USDM 04-07 STi/06-07 WRX. These will not drop any low end power, but actually cause faster spool of the turbo, creating more power and torque across the entire rpm range. Good for stock turbo or up to 500WHP(GT35R) upgrades. These cams require upgraded valve springs to keep everything safe at high rpm
#6025S2 STAGE 2 CAMS 272/272 $830
GSC Power-Division S2 camshafts for the USDM 04-07 STi/06-07 WRX. These cams are built to suite the high horsepower Subys. With a power range of 500WHP and up, you need some certain mods to utilize the true potential of the S2s. Built motor, with a built/ported head, and a good engine management system. Dual valve springs are recommended, but a upgraded single spring kit will do the job under 8000 rpm.
#6025S3 STAGE 3 CAMS 282/282 $790
GSC Power-Division S3 camshafts for the USDM 04-07 STi/06-07 WRX. These cams are built to suite the highest horsepower drag Subys. With a power range of 750-1000WHP and a rev range of 4500-9500rpms, you need some certain mods to utilize the true potential of the S3s. Built motor, with a built/ported head (clearanced for lift), and a standalone engine management system. Dual valve springs are recommended.

#5043 SPRINGS & RETAINERS $345
GSC Power-Division Beehive springs feature some of the most impressive manufacturing techniques in the industry. Our beehive spring uses an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. What this means to you is our spring has the highest level of spring load retention while still maintaining good fatigue threw out the life of the spring. Only the best materials go into the GSC Power-Division Beehive valve spring. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness.
The beehive valve spring shape has become the buzz lately. Some have enquired as to the benefits of a beehive spring vs the dual springs that are sold by others. While some might find that the beehive spring design is new it has been used commonly in many OE engines as well as in all of the NASCAR and F1 engines of today. Why? The beehive shape is more stable than standard single or dual cylindrical springs. The beehive design which incorporates an ovate wire is more than capable of the performance demands that were previously only matched by a Dual Springs. With the smaller and lighter retainer used on the beehive valve spring allow for higher RPM and more valve control. So beehive valve springs, with there lighter weight retainers allow for engine's to rev quicker and maintain a more stable valve motion than the traditional cylindrical springs of yesteryear.
The GSC 5043 Beehive valve spring set, and Grade 5 Titanium retainers. This kit is capable of 9500+ RPMS, with as much as 11.5mm lift cams.

SUBARU EJ257B WITH DUAL AVCS (08-10 STi)
#6026S1 STAGE 1 CAMS 266/264 $880
GSC Power-Division S1 camshafts for the 2008+ STI EJ257B With Dual AVCS. Good for stock turbo or up to 500WHP(GT35R) upgrades. These cams require and upgraded valve spring kit to keep everything safe at high rpm.
#6026S2 STAGE 2 CAMS 272/272 $880
GSC Power-Division S2 camshafts for the 08+ Subaru STi EJ257 with Dual AVCS. These cams are built to suite the higher horsepower Subys. With a power range of 500WHP and up, you need some certain mods to utilize the true potential of the S2s. Built motor, with a built/ported head, and a good engine management system. Dual valve springs are recommended, but a upgraded single spring kit will do the job under 8000 rpm.

#5043 SPRINGS & RETAINERS $345
GSC Power-Division Beehive springs feature some of the most impressive manufacturing techniques in the industry. Our beehive spring uses an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. What this means to you is our spring has the highest level of spring load retention while still maintaining good fatigue threw out the life of the spring. Only the best materials go into the GSC Power-Division Beehive valve spring. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness.
The beehive valve spring shape has become the buzz lately. Some have enquired as to the benefits of a beehive spring vs the dual springs that are sold by others. While some might find that the beehive spring design is new it has been used commonly in many OE engines as well as in all of the NASCAR and F1 engines of today. Why? The beehive shape is more stable than standard single or dual cylindrical springs. The beehive design which incorporates an ovate wire is more than capable of the performance demands that were previously only matched by a Dual Springs. With the smaller and lighter retainer used on the beehive valve spring allow for higher RPM and more valve control. So beehive valve springs, with there lighter weight retainers allow for engine's to rev quicker and maintain a more stable valve motion than the traditional cylindrical springs of yesteryear.
The GSC 5043 Beehive valve spring set, and Grade 5 Titanium retainers. This kit is capable of 9500+ RPMS, with as much as 11.5mm lift cams.

Erik@R/TTuning · 08-24-2011, 01:42 PM

MITSUBISHI 4G63 (03-05 EVO 8)
#6008S1 STAGE 1 CAMS 268/268 $495
The GSC Power-Division S1 cams for the Mitsu Evolution 4-8 are designed for those with the stock turbo up to the GT30/50Trim. These cams will not sacrifice any bottom end loss over stock cams; nothing but gains and will promote faster spooling of the upgraded turbos. Gains of 30-55whp (depending on Turbo) have been seen by simply bolting the S1 cams in. Designed for a rev range of 3000-8000rpms, these cams work well on the stock valve springs. 300-450whp camshaft. Idle is slightly rougher than stock.
#6008S2 STAGE 2 CAMS 274/274 $495
The S2 cams are designed for those with more power in mind or a larger turbo. No low end power is lost vs the stock cams when used with the larger turbos. The S2 cams will show gains of 50-70whp over the stock cams and in some cases more in the higher RPMS. Great for 2.0L engines revving to 9000rpms or for Stroker motors revving to 8000rpms. The S2 Cams are suggest to run on our upgraded Beehive valve spring replacement or can be run at the stock revlimit and factory boost on the stock spring. Designed for a rev range of 4000-9000 RPMS(2.0L or 3000-8000 2.2L+), 400-700whp applications. S2 cams can run on Factory ECU with custom flashing.
#6008S3 STAGE 3 CAMS 280/280 $495
The S3 Cams are available in a Solid Lifter cam and a Hydraulic Lifter Cam for the Evo 4-8 4G63. These cams are intended for the 800whp+ to take advantage of a very large turbo. these are NOT suggested for anyone running smaller than the 67mm to GT42R turbo.

#5041 SPRINGS & RETAINERS $375
GSC Power-Division Beehive springs feature some of the most impressive manufacturing techniques in the industry. Our beehive spring uses an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. What this means to you is our spring has the highest level of spring load retention while still maintaining good fatigue threw out the life of the spring. Only the best materials go into the GSC Power-Division Beehive valve spring. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness.
The beehive valve spring shape has become the buzz lately. Some have enquired as to the benefits of a beehive spring vs the dual springs that are sold by others. While some might find that the beehive spring design is new it has been used commonly in many OE engines as well as in all of the NASCAR and F1 engines of today. Why? The beehive shape is more stable than standard single or dual cylindrical springs. The beehive design which incorporates an ovate wire is more than capable of the performance demands that were previously only matched by a Dual Springs. With the smaller and lighter retainer used on the beehive valve spring allow for higher RPM and more valve control. So beehive valve springs, with there lighter weight retainers allow for engine's to rev quicker and maintain a more stable valve motion than the traditional cylindrical springs of yesteryear.
The GSC 5041 Beehive valve spring set, include new 4340 Chro-molly spring seats (these won't crack like others aluminum seats) and Grade 5 Titanium retainers. This kit is capable of 11000+ RPMS, with as much as 12.3mm lift cams. This is a must have for anyone pushing the limits. If you have had problems with valve float or throwing rocker arms this is the spring set that will cure your problems for good.

MITSUBISHI 4G63T-MIVEC (06 EVO 9)
#6009S1 STAGE 1 CAMS 268/268 $525
GSC Power-Division's Evo 9 S1 cams are designed for those with a stock turbo all the way to a GT30/50Trim. These cams will not sacrifice any bottom end loss over stock cams; nothing but gains and will promote faster spooling of the upgraded turbos. Gains of 25-40whp (depending on Turbo) have been seen by simply bolting the S1 cams in. Designed for a rev range of 3000-8000rpms, these cams work well on the stock valve springs. 300-450whp camshaft.
#6009S2 STAGE 2 CAMS 274/274 $525
The S2 cams are designed for those with more power in mind or a larger turbo. No low end power is lost vs the stock cams when used with the larger turbos. The S2 cams will show gains of 50-70whp over the stock cams and in some cases more in the higher RPMS. Great for 2.0L engines revving to 9000rpms or for Stroker motors revving to 8000rpms. The S2 Cams are suggest to run on our upgraded Beehive valve spring replacement or can be run at the stock revlimit and factory boost on the stock spring. Designed for a rev range of 4000-9000 RPMS(2.0L or 3000-8000 2.2L+), 400-700whp applications. S2 cams can run on Factory ECU with custom flashing.
#6009S3 STAGE 3 CAMS 280/280 $525
The S3 Cams are available in a Solid Lifter profile (please email for options) and an off the shelf Hydraulic Lifter profile for the Evo 9 4G63. These cams are meant for the 700whp+ to take advantage of a very large turbo these are NOT suggested for anyone running smaller.

#5041 SPRINGS & RETAINERS $375
GSC Power-Division Beehive springs feature some of the most impressive manufacturing techniques in the industry. Our beehive spring uses an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. What this means to you is our spring has the highest level of spring load retention while still maintaining good fatigue threw out the life of the spring. Only the best materials go into the GSC Power-Division Beehive valve spring. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness.
The beehive valve spring shape has become the buzz lately. Some have enquired as to the benefits of a beehive spring vs the dual springs that are sold by others. While some might find that the beehive spring design is new it has been used commonly in many OE engines as well as in all of the NASCAR and F1 engines of today. Why? The beehive shape is more stable than standard single or dual cylindrical springs. The beehive design which incorporates an ovate wire is more than capable of the performance demands that were previously only matched by a Dual Springs. With the smaller and lighter retainer used on the beehive valve spring allow for higher RPM and more valve control. So beehive valve springs, with there lighter weight retainers allow for engine's to rev quicker and maintain a more stable valve motion than the traditional cylindrical springs of yesteryear.
The GSC 5041 Beehive valve spring set, include new 4340 Chro-molly spring seats (these won't crack like others aluminum seats) and Grade 5 Titanium retainers. This kit is capable of 11000+ RPMS, with as much as 12.3mm lift cams. This is a must have for anyone pushing the limits. If you have had problems with valve float or throwing rocker arms this is the spring set that will cure your problems for good.

MITSUBISHI 4B11T (08-10 EVO X)
#6010S1 STAGE 1 CAMS 264/264 $595
The GSC Power-Division S1 cams for the Mitsu Evolution X are designed for those with the stock turbo up to the 550hp range These cams will not sacrifice any bottom end loss over stock cams; nothing but gains and will promote faster spooling of the upgraded turbos. Gains of 20-50whp (depending on Turbo) have been seen by simply bolting the S1 cams in.
#6010S2 STAGE 2 CAMS 274/274 $595
The GSC Power-Division S2 cams for the Mitsu Evolution X are designed for those with 600HP+ in mind. Gains of 40-80whp (depending on Turbo) have been seen by simply bolting the S2 cams in.

#5042 SPRINGS & RETAINERS $345
GSC Power-Division Beehive springs feature some of the most impressive manufacturing techniques in the industry. Our beehive spring uses an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. What this means to you is our spring has the highest level of spring load retention while still maintaining good fatigue threw out the life of the spring. Only the best materials go into the GSC Power-Division Beehive valve spring. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness.
The beehive valve spring shape has become the buzz lately. Some have enquired as to the benefits of a beehive spring vs the dual springs that are sold by others. While some might find that the beehive spring design is new it has been used commonly in many OE engines as well as in all of the NASCAR and F1 engines of today. Why? The beehive shape is more stable than standard single or dual cylindrical springs. The beehive design which incorporates an ovate wire is more than capable of the performance demands that were previously only matched by a Dual Springs. With the smaller and lighter retainer used on the beehive valve spring allow for higher RPM and more valve control. So beehive valve springs, with there lighter weight retainers allow for engine's to rev quicker and maintain a more stable valve motion than the traditional cylindrical springs of yesteryear.
The GSC 5042 Beehive valve spring set, and Grade 5 Titanium retainers. This kit is capable of 9500+ RPMS, with as much as 12mm lift cams.

**TROLL** · 08-24-2011, 01:49 PM

Awesome, I love my GSC S1 cams in my Supra, and so does everyone else who owns them. They make great power and these prices are really good!

Erik@R/TTuning · 08-30-2011, 11:36 AM

Time is running out on this sale. Orders must be in by 5pm today!

08-24-2011, 01:41 PM	#1
Erik@R/TTuning Former Vendor Join Date: Aug 2010 Member #17281 My Ride: 2000 MR2 Spyder iTrader: (1)	One week GSC Power Division Sale at R/T Tuning! CAMS!!! VALVE SPRINGS!!! RETAINERS!!! MAJOR DISCOUNTS on ALL GSC components until 8/30/11 @ 5:00pm. PM, Call (215-855-5565), or Email me (Erik@rttuning.com) for any questions, availability, or to order. NISSAN SR20DET #6040S1 STAGE 1 CAMS 268/270 $490 GSC Power-Division S1 cams for the Nissan SR20 S13/S14 non Variable engine. The S1 cams are designed for those running an upgraded turbo such as a GT25R to a GT3076. These cams will not have bottom end losses over stock cams; nothing but gains and will promote an extremly flat torque curve. Gains of 30-50whp (depending on Turbo) have been seen by simply bolting the S1 cams in and reshimming. Designed for a rev range of 3000-8000rpms, these cams require a single valve spring upgrade over stock. 300-500whp camshaft set with an idle slightly ruffer than stock. #6040S2 STAGE 2 CAMS 275/275 $490 GSC Power-Division S2 cams for the Nissan SR20 S13/S14 non Variable engine. The S2 cams are designed for those running an upgraded turbo such as a GT35R. These cams will not have bottom end losses over S1 cams; nothing but gains and will promote an extremly flat torque curve. Gains of 50-70whp (depending on Turbo) have been seen by simply bolting the S2 cams in and reshimming. Designed for a rev range of 4000-9000rpms, these cams require valve spring upgrades. 475-750whp camshaft set with a ruff idle. #5051 SPRINGS & RETAINERS $290 GSC Power-Division Valve Spring kit with Titanium Retainers. 90 Lbs @ Seat and 190Lbs @ .400" TOYOTA 2JZ-GTE #6030S1 STAGE 1 CAMS 269/269 $775 GSC Power-Division S1 cams for the Toyota Supra 2JZ-GTE. The S1 cams are designed for those running an upgraded single turbo larger than 57mm. These cams will not have bottom end losses over stock cams; nothing but gains and will promote an extremely flat torque curve. Gains of 40-70whp (depending on Turbo) have been seen by simply bolting the S1 cams in and reshimming. Designed for a rev range of 3500-8000rpms, these cams require a single valve spring upgrade over stock. 450-800whp camshaft set with an idle slightly rougher than stock. #6030S2 STAGE 2 CAMS 274/274 $775 GSC Power-Division S2 cams for the Toyota Supra 2JZ-GTE. The S2 cams are designed for those running a large single turbo, larger than 71mm. These cams will not have bottom end losses over our S1 cams; nothing but gains will be seen and will promote great peak power gains. Gains of 60-100whp (depending on Turbo) have been seen by simply bolting the S2 cams in and reshimming. Designed for a rev range of 4000-8500rpms, these cams require upgraded valve spring, but can be run on stock cylinder heads. 800-1100whp camshaft set with a ruffer than stock idle. #6030S3 STAGE 3 CAMS 290/290 $775 1000+ HP applications running anything from Methanol, NO2 or 45+psi. Call for more details. This is a serious cam for serious horsepower. #5044 SPRINGS & RETAINERS $515 GSC Power-Division Beehive springs feature some of the most impressive manufacturing techniques in the industry. Our beehive spring uses an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. What this means to you is our spring has the highest level of spring load retention while still maintaining good fatigue threw out the life of the spring. Only the best materials go into the GSC Power-Division Beehive valve spring. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness. The beehive valve spring shape has become the buzz lately. Some have enquired as to the benefits of a beehive spring vs the dual springs that are sold by others. While some might find that the beehive spring design is new it has been used commonly in many OE engines as well as in all of the NASCAR and F1 engines of today. Why? The beehive shape is more stable than standard single or dual cylindrical springs. The beehive design which incorporates an ovate wire is more than capable of the performance demands that were previously only matched by a Dual Springs. With the smaller and lighter retainer used on the beehive valve spring allow for higher RPM and more valve control. So beehive valve springs, with there lighter weight retainers allow for engine's to rev quicker and maintain a more stable valve motion than the traditional cylindrical springs of yesteryear. The GSC 5044 Beehive valve spring set and Grade 5 Titanium retainers. This kit is capable of 9000+ RPMS, with as much as 11.5mm lift cams. This is a must have for anyone pushing the limits. NISSAN VQ35DE #5052 SPRINGS & RETAINERS $430 GSC Power-Division Nissan 350z/G35 VQ35 Single Spring kit with Titanium retainers. 80 Lbs @ Seat and 175Lbs @ .400" HYUNDAI GENESIS 4B11 THETA #6060S1 STAGE 1 CAMS 264/264 $590 The GSC Power-Division S1 cams for the Hyundai Genesis Coupe 4B11 Theta are designed for those with the stock turbo up to the 550hp range These cams will not sacrifice any bottom end loss over stock cams; nothing but gains and will promote faster spooling of the upgraded turbos. Gains of 20-50whp (depending on Turbo) have been seen by simply bolting the S1 cams in. Designed for a rev range of 3000-7500rpms, these cams work well on the stock valve springs. #6060S2 STAGE 2 CAMS 272/270 $590 The GSC Power-Division S2 cams for the Hyundai Genesis Coupe 4B11 Theta are designed for those with 600HP+ in mind. Gains of 40-80whp (depending on Turbo) have been seen by simply bolting the S2 cams in. #5042 SPRINGS & RETAINERS $345 GSC Power-Division Beehive springs feature some of the most impressive manufacturing techniques in the industry. Our beehive spring uses an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. What this means to you is our spring has the highest level of spring load retention while still maintaining good fatigue threw out the life of the spring. Only the best materials go into the GSC Power-Division Beehive valve spring. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness. The beehive valve spring shape has become the buzz lately. Some have enquired as to the benefits of a beehive spring vs the dual springs that are sold by others. While some might find that the beehive spring design is new it has been used commonly in many OE engines as well as in all of the NASCAR and F1 engines of today. Why? The beehive shape is more stable than standard single or dual cylindrical springs. The beehive design which incorporates an ovate wire is more than capable of the performance demands that were previously only matched by a Dual Springs. With the smaller and lighter retainer used on the beehive valve spring allow for higher RPM and more valve control. So beehive valve springs, with there lighter weight retainers allow for engine's to rev quicker and maintain a more stable valve motion than the traditional cylindrical springs of yesteryear. The GSC 5042 Beehive valve spring set, and Grade 5 Titanium retainers. This kit is capable of 9500+ RPMS, with as much as 12mm lift cams. Last edited by Erik@R/TTuning; 08-25-2011 at 10:43 AM.

08-24-2011, 01:41 PM	#2
Erik@R/TTuning Former Vendor Join Date: Aug 2010 Member #17281 My Ride: 2000 MR2 Spyder iTrader: (1)	SUBARU EJ205 NON AVCS (02-05 WRX) #6020S1 STAGE 1 CAMS 266/266 $790 GSC Power-Division S1 camshafts for the EJ205 WRX Version 5 and 6. These will not drop any low end power, but actually cause faster spool of the turbo, creating more power and torque across the entire rpm range. Good for stock turbo or up to 500WHP(GT35R) upgrades. These cams require upgraded valve springs to keep everything safe at high rpm. #6020S2 STAGE 2 CAMS 272/272 $790 GSC Power-Division S2 camshafts for the EJ205 WRX Version 5 and 6. These cams are built to suite the high horsepower Subys. With a power range of 500WHP and up, you need some certain mods to utilize the true potential of the S2s. Built motor, with a built/ported head, and a good engine management system. Dual valve springs are recommended, but a upgraded single spring kit will do the job under 8000 rpm. #5043 SPRINGS & RETAINERS $345 GSC Power-Division Beehive springs feature some of the most impressive manufacturing techniques in the industry. Our beehive spring uses an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. What this means to you is our spring has the highest level of spring load retention while still maintaining good fatigue threw out the life of the spring. Only the best materials go into the GSC Power-Division Beehive valve spring. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness. The beehive valve spring shape has become the buzz lately. Some have enquired as to the benefits of a beehive spring vs the dual springs that are sold by others. While some might find that the beehive spring design is new it has been used commonly in many OE engines as well as in all of the NASCAR and F1 engines of today. Why? The beehive shape is more stable than standard single or dual cylindrical springs. The beehive design which incorporates an ovate wire is more than capable of the performance demands that were previously only matched by a Dual Springs. With the smaller and lighter retainer used on the beehive valve spring allow for higher RPM and more valve control. So beehive valve springs, with there lighter weight retainers allow for engine's to rev quicker and maintain a more stable valve motion than the traditional cylindrical springs of yesteryear. The GSC 5043 Beehive valve spring set, and Grade 5 Titanium retainers. This kit is capable of 9500+ RPMS, with as much as 11.5mm lift cams. SUBARU USDM EJ255 EJ257 WITH AVCS (04-07 STi/06-07 WRX) #6025S1 STAGE 1 CAMS 268/266 $790 GSC Power-Division S1 camshafts for the USDM 04-07 STi/06-07 WRX. These will not drop any low end power, but actually cause faster spool of the turbo, creating more power and torque across the entire rpm range. Good for stock turbo or up to 500WHP(GT35R) upgrades. These cams require upgraded valve springs to keep everything safe at high rpm #6025S2 STAGE 2 CAMS 272/272 $830 GSC Power-Division S2 camshafts for the USDM 04-07 STi/06-07 WRX. These cams are built to suite the high horsepower Subys. With a power range of 500WHP and up, you need some certain mods to utilize the true potential of the S2s. Built motor, with a built/ported head, and a good engine management system. Dual valve springs are recommended, but a upgraded single spring kit will do the job under 8000 rpm. #6025S3 STAGE 3 CAMS 282/282 $790 GSC Power-Division S3 camshafts for the USDM 04-07 STi/06-07 WRX. These cams are built to suite the highest horsepower drag Subys. With a power range of 750-1000WHP and a rev range of 4500-9500rpms, you need some certain mods to utilize the true potential of the S3s. Built motor, with a built/ported head (clearanced for lift), and a standalone engine management system. Dual valve springs are recommended. #5043 SPRINGS & RETAINERS $345 GSC Power-Division Beehive springs feature some of the most impressive manufacturing techniques in the industry. Our beehive spring uses an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. What this means to you is our spring has the highest level of spring load retention while still maintaining good fatigue threw out the life of the spring. Only the best materials go into the GSC Power-Division Beehive valve spring. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness. The beehive valve spring shape has become the buzz lately. Some have enquired as to the benefits of a beehive spring vs the dual springs that are sold by others. While some might find that the beehive spring design is new it has been used commonly in many OE engines as well as in all of the NASCAR and F1 engines of today. Why? The beehive shape is more stable than standard single or dual cylindrical springs. The beehive design which incorporates an ovate wire is more than capable of the performance demands that were previously only matched by a Dual Springs. With the smaller and lighter retainer used on the beehive valve spring allow for higher RPM and more valve control. So beehive valve springs, with there lighter weight retainers allow for engine's to rev quicker and maintain a more stable valve motion than the traditional cylindrical springs of yesteryear. The GSC 5043 Beehive valve spring set, and Grade 5 Titanium retainers. This kit is capable of 9500+ RPMS, with as much as 11.5mm lift cams. SUBARU EJ257B WITH DUAL AVCS (08-10 STi) #6026S1 STAGE 1 CAMS 266/264 $880 GSC Power-Division S1 camshafts for the 2008+ STI EJ257B With Dual AVCS. Good for stock turbo or up to 500WHP(GT35R) upgrades. These cams require and upgraded valve spring kit to keep everything safe at high rpm. #6026S2 STAGE 2 CAMS 272/272 $880 GSC Power-Division S2 camshafts for the 08+ Subaru STi EJ257 with Dual AVCS. These cams are built to suite the higher horsepower Subys. With a power range of 500WHP and up, you need some certain mods to utilize the true potential of the S2s. Built motor, with a built/ported head, and a good engine management system. Dual valve springs are recommended, but a upgraded single spring kit will do the job under 8000 rpm. #5043 SPRINGS & RETAINERS $345 GSC Power-Division Beehive springs feature some of the most impressive manufacturing techniques in the industry. Our beehive spring uses an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. What this means to you is our spring has the highest level of spring load retention while still maintaining good fatigue threw out the life of the spring. Only the best materials go into the GSC Power-Division Beehive valve spring. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness. The beehive valve spring shape has become the buzz lately. Some have enquired as to the benefits of a beehive spring vs the dual springs that are sold by others. While some might find that the beehive spring design is new it has been used commonly in many OE engines as well as in all of the NASCAR and F1 engines of today. Why? The beehive shape is more stable than standard single or dual cylindrical springs. The beehive design which incorporates an ovate wire is more than capable of the performance demands that were previously only matched by a Dual Springs. With the smaller and lighter retainer used on the beehive valve spring allow for higher RPM and more valve control. So beehive valve springs, with there lighter weight retainers allow for engine's to rev quicker and maintain a more stable valve motion than the traditional cylindrical springs of yesteryear. The GSC 5043 Beehive valve spring set, and Grade 5 Titanium retainers. This kit is capable of 9500+ RPMS, with as much as 11.5mm lift cams. Last edited by Erik@R/TTuning; 08-24-2011 at 01:45 PM.

08-24-2011, 01:42 PM	#3
Erik@R/TTuning Former Vendor Join Date: Aug 2010 Member #17281 My Ride: 2000 MR2 Spyder iTrader: (1)	MITSUBISHI 4G63 (03-05 EVO 8) #6008S1 STAGE 1 CAMS 268/268 $495 The GSC Power-Division S1 cams for the Mitsu Evolution 4-8 are designed for those with the stock turbo up to the GT30/50Trim. These cams will not sacrifice any bottom end loss over stock cams; nothing but gains and will promote faster spooling of the upgraded turbos. Gains of 30-55whp (depending on Turbo) have been seen by simply bolting the S1 cams in. Designed for a rev range of 3000-8000rpms, these cams work well on the stock valve springs. 300-450whp camshaft. Idle is slightly rougher than stock. #6008S2 STAGE 2 CAMS 274/274 $495 The S2 cams are designed for those with more power in mind or a larger turbo. No low end power is lost vs the stock cams when used with the larger turbos. The S2 cams will show gains of 50-70whp over the stock cams and in some cases more in the higher RPMS. Great for 2.0L engines revving to 9000rpms or for Stroker motors revving to 8000rpms. The S2 Cams are suggest to run on our upgraded Beehive valve spring replacement or can be run at the stock revlimit and factory boost on the stock spring. Designed for a rev range of 4000-9000 RPMS(2.0L or 3000-8000 2.2L+), 400-700whp applications. S2 cams can run on Factory ECU with custom flashing. #6008S3 STAGE 3 CAMS 280/280 $495 The S3 Cams are available in a Solid Lifter cam and a Hydraulic Lifter Cam for the Evo 4-8 4G63. These cams are intended for the 800whp+ to take advantage of a very large turbo. these are NOT suggested for anyone running smaller than the 67mm to GT42R turbo. #5041 SPRINGS & RETAINERS $375 GSC Power-Division Beehive springs feature some of the most impressive manufacturing techniques in the industry. Our beehive spring uses an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. What this means to you is our spring has the highest level of spring load retention while still maintaining good fatigue threw out the life of the spring. Only the best materials go into the GSC Power-Division Beehive valve spring. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness. The beehive valve spring shape has become the buzz lately. Some have enquired as to the benefits of a beehive spring vs the dual springs that are sold by others. While some might find that the beehive spring design is new it has been used commonly in many OE engines as well as in all of the NASCAR and F1 engines of today. Why? The beehive shape is more stable than standard single or dual cylindrical springs. The beehive design which incorporates an ovate wire is more than capable of the performance demands that were previously only matched by a Dual Springs. With the smaller and lighter retainer used on the beehive valve spring allow for higher RPM and more valve control. So beehive valve springs, with there lighter weight retainers allow for engine's to rev quicker and maintain a more stable valve motion than the traditional cylindrical springs of yesteryear. The GSC 5041 Beehive valve spring set, include new 4340 Chro-molly spring seats (these won't crack like others aluminum seats) and Grade 5 Titanium retainers. This kit is capable of 11000+ RPMS, with as much as 12.3mm lift cams. This is a must have for anyone pushing the limits. If you have had problems with valve float or throwing rocker arms this is the spring set that will cure your problems for good. MITSUBISHI 4G63T-MIVEC (06 EVO 9) #6009S1 STAGE 1 CAMS 268/268 $525 GSC Power-Division's Evo 9 S1 cams are designed for those with a stock turbo all the way to a GT30/50Trim. These cams will not sacrifice any bottom end loss over stock cams; nothing but gains and will promote faster spooling of the upgraded turbos. Gains of 25-40whp (depending on Turbo) have been seen by simply bolting the S1 cams in. Designed for a rev range of 3000-8000rpms, these cams work well on the stock valve springs. 300-450whp camshaft. #6009S2 STAGE 2 CAMS 274/274 $525 The S2 cams are designed for those with more power in mind or a larger turbo. No low end power is lost vs the stock cams when used with the larger turbos. The S2 cams will show gains of 50-70whp over the stock cams and in some cases more in the higher RPMS. Great for 2.0L engines revving to 9000rpms or for Stroker motors revving to 8000rpms. The S2 Cams are suggest to run on our upgraded Beehive valve spring replacement or can be run at the stock revlimit and factory boost on the stock spring. Designed for a rev range of 4000-9000 RPMS(2.0L or 3000-8000 2.2L+), 400-700whp applications. S2 cams can run on Factory ECU with custom flashing. #6009S3 STAGE 3 CAMS 280/280 $525 The S3 Cams are available in a Solid Lifter profile (please email for options) and an off the shelf Hydraulic Lifter profile for the Evo 9 4G63. These cams are meant for the 700whp+ to take advantage of a very large turbo these are NOT suggested for anyone running smaller. #5041 SPRINGS & RETAINERS $375 GSC Power-Division Beehive springs feature some of the most impressive manufacturing techniques in the industry. Our beehive spring uses an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. What this means to you is our spring has the highest level of spring load retention while still maintaining good fatigue threw out the life of the spring. Only the best materials go into the GSC Power-Division Beehive valve spring. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness. The beehive valve spring shape has become the buzz lately. Some have enquired as to the benefits of a beehive spring vs the dual springs that are sold by others. While some might find that the beehive spring design is new it has been used commonly in many OE engines as well as in all of the NASCAR and F1 engines of today. Why? The beehive shape is more stable than standard single or dual cylindrical springs. The beehive design which incorporates an ovate wire is more than capable of the performance demands that were previously only matched by a Dual Springs. With the smaller and lighter retainer used on the beehive valve spring allow for higher RPM and more valve control. So beehive valve springs, with there lighter weight retainers allow for engine's to rev quicker and maintain a more stable valve motion than the traditional cylindrical springs of yesteryear. The GSC 5041 Beehive valve spring set, include new 4340 Chro-molly spring seats (these won't crack like others aluminum seats) and Grade 5 Titanium retainers. This kit is capable of 11000+ RPMS, with as much as 12.3mm lift cams. This is a must have for anyone pushing the limits. If you have had problems with valve float or throwing rocker arms this is the spring set that will cure your problems for good. MITSUBISHI 4B11T (08-10 EVO X) #6010S1 STAGE 1 CAMS 264/264 $595 The GSC Power-Division S1 cams for the Mitsu Evolution X are designed for those with the stock turbo up to the 550hp range These cams will not sacrifice any bottom end loss over stock cams; nothing but gains and will promote faster spooling of the upgraded turbos. Gains of 20-50whp (depending on Turbo) have been seen by simply bolting the S1 cams in. #6010S2 STAGE 2 CAMS 274/274 $595 The GSC Power-Division S2 cams for the Mitsu Evolution X are designed for those with 600HP+ in mind. Gains of 40-80whp (depending on Turbo) have been seen by simply bolting the S2 cams in. #5042 SPRINGS & RETAINERS $345 GSC Power-Division Beehive springs feature some of the most impressive manufacturing techniques in the industry. Our beehive spring uses an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. What this means to you is our spring has the highest level of spring load retention while still maintaining good fatigue threw out the life of the spring. Only the best materials go into the GSC Power-Division Beehive valve spring. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness. The beehive valve spring shape has become the buzz lately. Some have enquired as to the benefits of a beehive spring vs the dual springs that are sold by others. While some might find that the beehive spring design is new it has been used commonly in many OE engines as well as in all of the NASCAR and F1 engines of today. Why? The beehive shape is more stable than standard single or dual cylindrical springs. The beehive design which incorporates an ovate wire is more than capable of the performance demands that were previously only matched by a Dual Springs. With the smaller and lighter retainer used on the beehive valve spring allow for higher RPM and more valve control. So beehive valve springs, with there lighter weight retainers allow for engine's to rev quicker and maintain a more stable valve motion than the traditional cylindrical springs of yesteryear. The GSC 5042 Beehive valve spring set, and Grade 5 Titanium retainers. This kit is capable of 9500+ RPMS, with as much as 12mm lift cams. Last edited by Erik@R/TTuning; 08-24-2011 at 01:44 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
R/T Tuning Power Moves 2010!	Matt@R/Ttuning	(Past Vendors)	14	03-20-2010 10:39 PM
Rt tuning fall alignment special! PRICE EXTENDED THROUGH THIS WEEK! HURRY!	Matt@R/Ttuning	(Past Vendors)	14	09-22-2008 12:54 PM
Apex-i Power FC...Start tuning your personal Monster	S.Milone	(Past Vendors)	30	05-19-2008 09:41 AM
Looking for someplace that tunes Power FC's/dyno tuning.	the mike	Engine Management and Tuning	12	07-15-2007 04:06 PM

08-30-2011, 11:36 AM	#5
Erik@R/TTuning Former Vendor Join Date: Aug 2010 Member #17281 My Ride: 2000 MR2 Spyder iTrader: (1)	Time is running out on this sale. Orders must be in by 5pm today!