Evolution Perofrmance's 2011 Mustang GT ran 8.89@148MPH - TriStateTuners.com :: Home of Tristate Auto Enthusiast

Chris B. · 10-15-2010, 02:32 AM

and backed it up with a 9.02@148

Its a supercharged, intercooled auto trans 2011 GT with slicks and skinnines and all the usual drag car bolt ons. Its the same 2011 GT that you may have seen the video of when it launched and got all 4 wheels off the ground.

Not bad considering the car has been out for about 5 or 6 months.

http://www.youtube.com/watch?v=D2z8exW96l8

SleeperGoat · 10-15-2010, 03:53 AM

Its built now engine wise though it was impressive when i saw it at the track rental. Now its just like any LS motor on boost my buddys LS1 SC with 16-18psi is doing the same mile an hour but he's got crazy traction issues.

HickRocket1258 · 10-15-2010, 08:29 AM

You can make anything go that fast if you have the money to do it. That place is a joke. Won't help you unless you have a lot of money to throw at them. And with that wheel stand, that's just an inexperienced driver right there.

jpalamar · 10-15-2010, 09:16 AM

I don't see anything great about someone buying a fast car. Its all about building it yourself.

Chris B. · 10-16-2010, 05:36 PM

Quote:

Originally Posted by jpalamar

I don't see anything great about someone buying a fast car. Its all about building it yourself.

The guys at the shop did build it themself. Its one of the two 2011 GT's the shop has. Its not like a 2011 GT runs 8's int he 1/4 stock.

11secdsm · 10-16-2010, 05:49 PM

It's impressive regardless of who built it and if it's actually built. Most "built" cars you see at the truck can barely crack 10s, let alone 8s. The car's not my cup of tea, but it's still moving.

jesse096 · 10-16-2010, 07:09 PM

Like the use of ATR in the beginning, sweet!

Car looked sick man, how much boost you running?

sean3 · 10-16-2010, 07:58 PM

They built the motor, strapped on a blower that could suck in small children, swapped in a built auto and 9" rear, and put slicks and skinnies on it. Of course it's going to be fast. 8s have been done... quite a few times.

I especially like the giant wheel stand that resulted in them presumably snapping the POS tubular kmember I'm sure they installed.

And let's not forget all the people this scumbag shop has screwed over.

SleeperGoat · 10-16-2010, 09:05 PM

Seemed friendly to me but they were at a GM an LS track rental. Your right though ford 9" built trans an motor I'd hope for at least 9s starting off an work towards the 8s.

HickRocket1258 · 10-18-2010, 08:21 AM

Quote:

Originally Posted by sean3

And let's not forget all the people this scumbag shop has screwed over.

I've definitely heard those stories. I wouldn't give them a cent of my money.

LawlWheelDrive · 05-04-2011, 12:47 PM

no kidding he has traction issues what kind of slicks are those? why no wheelie bars if he has that much power going through it?

SledgeHammer · 06-12-2011, 10:31 AM

Yeah the car is fast but its not what I see as a real street car in the form its in... Regarding them screwing owners, name a shop that does not have an unhappy customer. More often then not the customer is the issue not the shop, although there are clear cases of the shop dropping the ball. Anywho its a fast damn car I'd love to see it with a stick on DR's just for fun.

HPF Fallon · 06-17-2011, 05:27 PM

Nice shot!

rightaway · 07-01-2011, 11:08 PM

those new 5.0 look like a nice car and take well to mods

PhillySVT · 07-02-2011, 08:09 PM

To bad they have ripped off a ton of locals......why do you think all the cars on their lot have out of state plates??????

PhillySVT · 07-02-2011, 08:11 PM

Quote:

Originally Posted by HickRocket1258

You can make anything go that fast if you have the money to do it. That place is a joke. Won't help you unless you have a lot of money to throw at them. And with that wheel stand, that's just an inexperienced driver right there.

I had a ton of money and a mint turbo 03 cobra and the still f#$ked me over.

Mach1 · 07-03-2011, 10:33 PM

Never had a problem with them. They did my gears, exhaust, and Lund tuned me there.

Who I don't trust is that kid tuning @ Tillman, that dip **** had NO idea how to work with a knock sensor.. How the **** do you get a job tuning and NOT know how to work a knock sensor?

When the guy dropping off his car to get tuned is telling you how to do it.... you suck at your job. Hell one of the guys at Tillman's called my shaker a supercharger.

PhillySVT · 07-04-2011, 12:49 PM

Lunds is a great guy.....I was refering to the shop. Lund tuned both of my old cobras. I wouldn't hesitate to send another car to him to get tuned. While he does tune there he is a seperate entity. I know for while he wasn't tuning at Evolutions......

Quote:

Originally Posted by Mach1

Never had a problem with them. They did my gears, exhaust, and Lund tuned me there.

Who I don't trust is that kid tuning @ Tillman, that dip **** had NO idea how to work with a knock sensor.. How the **** do you get a job tuning and NOT know how to work a knock sensor?

When the guy dropping off his car to get tuned is telling you how to do it.... you suck at your job. Hell one of the guys at Tillman's called my shaker a supercharger.

HickRocket1258 · 07-11-2011, 03:57 PM

Quote:

Originally Posted by PhillySVT

Lunds is a great guy.....I was refering to the shop. Lund tuned both of my old cobras. I wouldn't hesitate to send another car to him to get tuned. While he does tune there he is a seperate entity. I know for while he wasn't tuning at Evolutions......

That's what I hear about the guy as well. Good guy. Tuned this one guy's 5.0 and he only had that and M/T drag radials going 12.11 at Cecil earlier this year.

10-15-2010, 02:32 AM	#1
Chris B. Tri-State Post Whore Join Date: Jul 2009 Location: Lehigh Valley Member #14208 My Ride: is Sonic Blue iTrader: (0)	Evolution Perofrmance's 2011 Mustang GT ran 8.89@148MPH and backed it up with a 9.02@148 Its a supercharged, intercooled auto trans 2011 GT with slicks and skinnines and all the usual drag car bolt ons. Its the same 2011 GT that you may have seen the video of when it launched and got all 4 wheels off the ground. Not bad considering the car has been out for about 5 or 6 months. http://www.youtube.com/watch?v=D2z8exW96l8

10-15-2010, 03:53 AM	#2
SleeperGoat Tri-State Post Whore Join Date: Jan 2007 Location: Dolyestown-Pa Member #3339 My Ride: 84 Camaro/ 05 GTO iTrader: (0)	Its built now engine wise though it was impressive when i saw it at the track rental. Now its just like any LS motor on boost my buddys LS1 SC with 16-18psi is doing the same mile an hour but he's got crazy traction issues. __________________ formerly BlackZ05 05 Nissan 350z- Sold! 84 Camaro- Project from Hell car now Stripped an being Sanded.....Slowly no weekend life anymore 05 GTO - Push Button Performance w/ spooling action

10-15-2010, 08:29 AM	#3
HickRocket1258 Tri-State Post Whore Join Date: May 2005 Location: West Chester, PA Member #415 iTrader: (0)	You can make anything go that fast if you have the money to do it. That place is a joke. Won't help you unless you have a lot of money to throw at them. And with that wheel stand, that's just an inexperienced driver right there. __________________ -Rob Just a mustang that's lowered.....that's about it. Work harder....Millions on welfare depend on you! Last edited by HickRocket1258; 10-15-2010 at 08:31 AM.

10-16-2010, 05:49 PM	#6
11secdsm Tri-State Post Whore Join Date: May 2007 Location: Warrington, PA Member #4914 My Ride: '15 F150, '11 535xi, '95 M3, '04 Wrangler iTrader: (2)	It's impressive regardless of who built it and if it's actually built. Most "built" cars you see at the truck can barely crack 10s, let alone 8s. The car's not my cup of tea, but it's still moving. __________________ -Chris 1995 M3 LS6 swapped 1991 Eclipse auto- 725whp - 5.93@122 1/8 \|\| 9.14 @ 151 2006 Evo IX- 609whp-> (2.3L) \|\| 11.19 @ 128 ->(stock 2.0) SOLD 1997 Supra- 670whp- 10.91 @ 139 SOLD

10-16-2010, 09:05 PM	#9
SleeperGoat Tri-State Post Whore Join Date: Jan 2007 Location: Dolyestown-Pa Member #3339 My Ride: 84 Camaro/ 05 GTO iTrader: (0)	Seemed friendly to me but they were at a GM an LS track rental. Your right though ford 9" built trans an motor I'd hope for at least 9s starting off an work towards the 8s. __________________ formerly BlackZ05 05 Nissan 350z- Sold! 84 Camaro- Project from Hell car now Stripped an being Sanded.....Slowly no weekend life anymore 05 GTO - Push Button Performance w/ spooling action

10-15-2010, 09:16 AM	#4
jpalamar TST Ruined My Life! Join Date: May 2009 Location: Collegeville, PA Member #13773 My Ride: 03 Corvette Z06 iTrader: (3)	I don't see anything great about someone buying a fast car. Its all about building it yourself.

10-16-2010, 07:58 PM	#8
sean3 Tri-State Post Whore Join Date: Sep 2007 Location: Cherry Hill, NJ Member #5757 My Ride: 04 Mach 1 iTrader: (0)	They built the motor, strapped on a blower that could suck in small children, swapped in a built auto and 9" rear, and put slicks and skinnies on it. Of course it's going to be fast. 8s have been done... quite a few times. I especially like the giant wheel stand that resulted in them presumably snapping the POS tubular kmember I'm sure they installed. And let's not forget all the people this scumbag shop has screwed over.

05-04-2011, 12:47 PM	#11
LawlWheelDrive Tri-State Training Wheels Join Date: May 2011 Member #20669 My Ride: 99 GT mustang/1991 toyota station wagon iTrader: (0)	no kidding he has traction issues what kind of slicks are those? why no wheelie bars if he has that much power going through it?

06-12-2011, 10:31 AM	#12
SledgeHammer Tri-State Aficionado Join Date: Jun 2011 Location: New Jerz Member #21099 My Ride: 17 1LE, 17 C Coupe, 16 Scion and other stuff iTrader: (0)	Yeah the car is fast but its not what I see as a real street car in the form its in... Regarding them screwing owners, name a shop that does not have an unhappy customer. More often then not the customer is the issue not the shop, although there are clear cases of the shop dropping the ball. Anywho its a fast damn car I'd love to see it with a stick on DR's just for fun. __________________ 17 1LE aka Thumper... RPM'd, LME'd and PC'd makes a few Eagles fly/ IG @rulethethrone

06-17-2011, 05:27 PM	#13
HPF Fallon Noob-Jersey Join Date: Jun 2011 Member #21157 My Ride: BMW M3 iTrader: (0)	Nice shot!

07-01-2011, 11:08 PM	#14
rightaway Tri-State Aficionado Join Date: Aug 2009 Location: Bethlehem Member #14493 My Ride: 2002 Infiniti G20 Sport iTrader: (0)	those new 5.0 look like a nice car and take well to mods

07-03-2011, 10:33 PM	#17
Mach1 Tri-State Addict Join Date: May 2007 Location: Delco, PA Member #4603 My Ride: 2014 Altima S iTrader: (0)	Never had a problem with them. They did my gears, exhaust, and Lund tuned me there. Who I don't trust is that kid tuning @ Tillman, that dip ** had NO idea how to work with a knock sensor.. How the do you get a job tuning and NOT know how to work a knock sensor? When the guy dropping off his car to get tuned is telling you how to do it.... you suck at your job. Hell one of the guys at Tillman's called my shaker a supercharger. __________________ Present: 2018 Q50 RED SPORT 400 AWD JB1 - 20% Tint Past:** 1991 Taurus GL, 2001 Escort ZX2, 2000 Escort ZX2 S/R, 2003 Mach1, 2014 Altima 2.5 S

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
JST2KWIK's trip to Miami-exotics and 2011 mustang rental inside	JST2KWIK	Gallery	2	10-30-2010 05:09 PM
Edmunds Inside Line dynoed the new 2011 Mustang GT and the results were....	Chris B.	General Car Related Chat	37	03-30-2010 04:50 PM
2011 Mustang GT Photos Leaked, 5.0 Engine and Profile View	ScoobyNubieToo!	General Car Related Chat	66	01-03-2010 11:31 PM
2011 nsx	hondaguy215	General Car Related Chat	50	08-03-2008 08:45 AM