Idle video of my LS1 RX7 - TriStateTuners.com :: Home of Tristate Auto Enthusiast

CULATER · 08-26-2010, 03:58 PM

I bought a cam for my rx7 a few months ago but I have been doing alot of others cars lately and haven't had time to put it in. When my radiator fan decided to call it quits i put the cam in at the same time. I swapped in a 237 242 113+4.

http://www.youtube.com/watch?v=DDebc...layer_embedded

jesse096 · 08-26-2010, 04:01 PM

Sexy, how much power you putting to the ground? Any ride a long shots?

-Jesse

Reinke2977 · 08-26-2010, 04:10 PM

thats a nice piece of machinery... very nice

cupofnoodles · 08-26-2010, 04:13 PM

dam d00d

OutToWinPAHC · 08-26-2010, 04:30 PM

I know that cam..... Texas Racing MS3

CULATER · 08-26-2010, 04:45 PM

I have not dynoed it yet. I have done similar setups in a bunch of fbodys and vettes and they all dynoed between 395-410rwhp. I will get in car videos eventually. On street tires there is no point.

Its a MS3 advanced a few extra degrees.

supraghost · 08-26-2010, 04:50 PM

sounds nice! i think i can hear each individual cylinder firing lol

OutToWinPAHC · 08-26-2010, 06:41 PM

Wanna help me do mine? I am stripping down my LQ9 and LS6 making one good motor. The LS6 may or may not have a bottom end issue, so rather then tear down and rebuild I am just swapping it all onto the LQ block. I'd like to get the cam swap dead on.

CULATER · 08-27-2010, 08:21 AM

Quote:

Originally Posted by OutToWinPAHC

Wanna help me do mine? I am stripping down my LQ9 and LS6 making one good motor. The LS6 may or may not have a bottom end issue, so rather then tear down and rebuild I am just swapping it all onto the LQ block. I'd like to get the cam swap dead on.

Send me a pm and let me know your plans.

clutchgordon86 · 08-31-2010, 08:34 PM

Very nice setup. I've always wanted to do that. Did you do the swap yourself?

driftingrx5.7 · 08-31-2010, 10:35 PM

lol mine is faster

sounds good man! i love that camber in the rear

Qwibby · 08-31-2010, 11:41 PM

wow nice, I love LS rx7's

CULATER · 09-01-2010, 12:14 AM

Quote:

Originally Posted by clutchgordon86

Very nice setup. I've always wanted to do that. Did you do the swap yourself?

Yes.

Quote:

Originally Posted by driftingrx5.7

lol mine is faster

sounds good man! i love that camber in the rear

Stock springs are way to soft.

Bring the vert down to DE and i can give you a good deal on a cam installed and tuned.

08-26-2010, 03:58 PM	#1
CULATER Tri-State Aficionado Join Date: Nov 2008 Location: Delaware Member #10181 My Ride: 2000 F350 on 41 inch IROKs, 1967 Chevelle, 1987 RX7 LS1/T56 Powered iTrader: (0)	Idle video of my LS1 RX7 I bought a cam for my rx7 a few months ago but I have been doing alot of others cars lately and haven't had time to put it in. When my radiator fan decided to call it quits i put the cam in at the same time. I swapped in a 237 242 113+4. http://www.youtube.com/watch?v=DDebc...layer_embedded

08-31-2010, 10:35 PM	#11
driftingrx5.7 Tri-State Post Whore Join Date: Dec 2006 Location: Poconos PA Member #3099 My Ride: 88 rx5.7 iTrader: (0)	lol mine is faster sounds good man! i love that camber in the rear __________________ my v8 rx7build To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
H22 idle problem	Keeper1343	Honda / Acura Talk	9	12-15-2009 03:43 PM
Shaking while idle	broski	Engine Performance	13	11-03-2008 07:53 PM
VW- 95 2.0 Randomly stumbles at idle. between 800-1100 RPM's. Idle Control Valve?	Drftpretty	Engine Performance	0	03-15-2008 04:53 PM
Idle Issues (No longer holds idle)	naDintheHat	Audi / Volkswagen Talk	8	03-22-2007 01:24 PM
low idle problems	JSeoul	General Car Related Chat	1	03-08-2007 09:29 AM

08-26-2010, 04:10 PM	#3
Reinke2977 Tri-State Training Wheels Join Date: Oct 2009 Location: Wallyworld Member #14986 My Ride: 03 explorer, 9-3 2.0t iTrader: (0)	thats a nice piece of machinery... very nice

08-26-2010, 04:13 PM	#4
cupofnoodles Tri-State Post Whore Join Date: Jul 2009 Location: Philadelphia Member #14330 My Ride: is supercalifragilisticexpialidocious iTrader: (1)	dam d00d

08-26-2010, 04:30 PM	#5
OutToWinPAHC Tri-State Post Whore Join Date: Jun 2007 Location: Tokelau Member #5081 My Ride: R33 GTS25T, RHD E46, Truck, part R32 GTR iTrader: (2)	I know that cam..... Texas Racing MS3

08-26-2010, 04:45 PM	#6
CULATER Tri-State Aficionado Join Date: Nov 2008 Location: Delaware Member #10181 My Ride: 2000 F350 on 41 inch IROKs, 1967 Chevelle, 1987 RX7 LS1/T56 Powered iTrader: (0)	I have not dynoed it yet. I have done similar setups in a bunch of fbodys and vettes and they all dynoed between 395-410rwhp. I will get in car videos eventually. On street tires there is no point. Its a MS3 advanced a few extra degrees.

08-26-2010, 06:41 PM	#8
OutToWinPAHC Tri-State Post Whore Join Date: Jun 2007 Location: Tokelau Member #5081 My Ride: R33 GTS25T, RHD E46, Truck, part R32 GTR iTrader: (2)	Wanna help me do mine? I am stripping down my LQ9 and LS6 making one good motor. The LS6 may or may not have a bottom end issue, so rather then tear down and rebuild I am just swapping it all onto the LQ block. I'd like to get the cam swap dead on.

08-31-2010, 08:34 PM	#10
clutchgordon86 Noob-Jersey Join Date: Oct 2006 Member #2823 iTrader: (0)	Very nice setup. I've always wanted to do that. Did you do the swap yourself?

08-31-2010, 11:41 PM	#12
Qwibby Tri-State Addict Join Date: Aug 2010 Location: Pa Member #17285 My Ride: 2001 Turbo Cavalier iTrader: (1)	wow nice, I love LS rx7's