HUNTER ALIGNMENT Rack... Schedule your race or street alignment now. - Page 8 - TriStateTuners.com :: Home of Tristate Auto Enthusiast

Omar_MSP · 04-07-2008, 05:28 PM

i can't wait for wednesday!

01bb6er · 04-08-2008, 02:18 PM

Hey Guys,
I talked to Vince on the phone yesterday about getting my 2001 Prelude aligned, corner balanced, and adjusting height of the coilovers. I would like to work out a price. Vince said I will also need some upper control arms and I was thinking about some wheels. I'm looking at the enkei racing series, possibly 17" Rs7 in bronze, but i'm open to suggestions. I would like to keep the price for wheels and tires around $1000 or so. Just let me know what you think. One more quick question, what is the need for upper control arms? Never really heard of needing those for an alignment. Are they needed to adjust camber?

Thanks,
Glen

CHR!S · 04-17-2008, 12:30 PM

how far in advanced would i need to schedule an appointment to get my s2000 done? im gonna need an allignment, camber/toe adjustment, and corner balancing (the $275 option)

Vince@R/TTuning · 04-17-2008, 01:30 PM

we could get ya in sometime next week, we have been aligning about two s2k's a week for the past 4 weeks...must be SCCA season..

CHR!S · 04-17-2008, 02:39 PM

i havent gotten my suspension in yet, it comes in may 1st. then my 21st bday is may 11th and i come home from cali may 20th... so im prob not gonna be doing much in that time.... plus i need my fenders rolled (do you guys do that as well?)

most tracks wont allow me on the track without a one-piece rollbar and/or a hardtop... next year im gonna be making it out to several hpde events & open track days. my friend chris runs honda challenge (the red passwordjdm ek hatch) so hes gonna be my instructor

PhillySVT · 05-04-2008, 06:36 PM

I'm calling you guys tommorow.

04AV6 6SPD · 05-04-2008, 06:46 PM

if possible i need basic alignment done sometime tommorow(pm sent earlier)

Matt@R/Ttuning · 06-26-2008, 12:36 PM

is everyone up to date and taken care of alignment wise?? we have some free space if anyone wants to squeak in.

russiankid · 06-26-2008, 12:49 PM

Hey guys,

I need an alignment done, but not sure if it would be under four wheel alignment. I replaced my rack and pinion about a year ago, and had Firestone do an alignment. However, they did not center the rack and steering wheel. They used the tie rod ends to center everything. So now the ball joints are at their limit. From what I know, the rack is centered alone and then the steering wheel is centered after replacing the rack, which is what Firestone neglected to do.

So how much would it cost to do this type of alignment? I am just planning my expenses out ahead of time so this may not be for another month or two.

Thanks.

04AV6 6SPD · 06-26-2008, 01:26 PM

i need it soon too but have to put in camber kit in back

CHR!S · 07-02-2008, 11:20 AM

i need my car alligned, the camber adjusted, and corner balanced as soon as possible. when would the soonest day id be able to bring the car up there and have it done?

Vince@R/TTuning · 07-02-2008, 11:56 AM

call the shop to set somthin up...possibly tommorrow if everything works out....

CHR!S · 07-02-2008, 12:38 PM

dropping the car off tonight @ around 7

**TROLL** · 07-04-2008, 10:48 PM

I gotta get the Subie out to you guys for an alignment... bonus points if you can troubleshoot my mystery knock too...

Matt@R/Ttuning · 07-07-2008, 10:30 AM

Quote:

Originally Posted by TROLL

I gotta get the Subie out to you guys for an alignment... bonus points if you can troubleshoot my mystery knock too...

Lets do this troll man..
Call me at the shop
215-855-5565
hearts,
Matt

freewilly · 08-01-2008, 10:25 AM

it says that you can get the proper parts to correct bump steer. Can you ellaborate on this a little bit?

Vince@R/TTuning · 08-01-2008, 10:35 AM

If available... we can get mount adjustable outer tie rod ends and dial in the correct angle to minimize bumpsteer...

D Money · 09-08-2008, 02:35 PM

are you guys available next Saturday to do an alignment on an sti? Tein flex, camber adjustment, as well as ride height.

So is that $125?

Vince@R/TTuning · 09-08-2008, 03:42 PM

Sorry but we don't have Saturday hours currently, but we are open later during the week to accommodate schedules. Give us a call if you want to schedule something. 215 855 5565 thanx....

D Money · 09-08-2008, 03:44 PM

How late during the week? How long will it take to do the alignment?

04-07-2008, 05:28 PM	#141
Omar_MSP Tri-State Post Whore Join Date: Jul 2006 Location: Ionno Member #2201 My Ride: MSP iTrader: (0)	i can't wait for wednesday! __________________ Canon Rebel XTI I wonder how much deeper the ocean would be without sponges.

04-17-2008, 01:30 PM	#144
Vince@R/TTuning Vendor Join Date: Mar 2007 Location: telford Pa Member #3958 My Ride: the one in the back of the shop iTrader: (2)	we could get ya in sometime next week, we have been aligning about two s2k's a week for the past 4 weeks...must be SCCA season.. __________________ Philadelphia Area's Only Authorized and Factory Trained Pro Tuners for:HONDATA:UPREV:APEXI POWER FC:AEM:COBB:ECUTEK To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

06-26-2008, 12:49 PM	#149
russiankid Tri-State Post Whore Join Date: May 2008 Location: Lincoln University PA Member #7769 My Ride: 2012 Scion tC iTrader: (0)	Hey guys, I need an alignment done, but not sure if it would be under four wheel alignment. I replaced my rack and pinion about a year ago, and had Firestone do an alignment. However, they did not center the rack and steering wheel. They used the tie rod ends to center everything. So now the ball joints are at their limit. From what I know, the rack is centered alone and then the steering wheel is centered after replacing the rack, which is what Firestone neglected to do. So how much would it cost to do this type of alignment? I am just planning my expenses out ahead of time so this may not be for another month or two. Thanks. __________________ 2012' Scion tC 6-speed M/T.

07-02-2008, 11:56 AM	#152
Vince@R/TTuning Vendor Join Date: Mar 2007 Location: telford Pa Member #3958 My Ride: the one in the back of the shop iTrader: (2)	call the shop to set somthin up...possibly tommorrow if everything works out.... __________________ Philadelphia Area's Only Authorized and Factory Trained Pro Tuners for:HONDATA:UPREV:APEXI POWER FC:AEM:COBB:ECUTEK To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

08-01-2008, 10:35 AM	#157
Vince@R/TTuning Vendor Join Date: Mar 2007 Location: telford Pa Member #3958 My Ride: the one in the back of the shop iTrader: (2)	If available... we can get mount adjustable outer tie rod ends and dial in the correct angle to minimize bumpsteer... __________________ Philadelphia Area's Only Authorized and Factory Trained Pro Tuners for:HONDATA:UPREV:APEXI POWER FC:AEM:COBB:ECUTEK To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

04-08-2008, 02:18 PM	#142
01bb6er Tri-State Addict Join Date: Feb 2008 Location: Allentown, PA Member #7015 My Ride: 95 Kouki Converted 240sx iTrader: (1)	Hey Guys, I talked to Vince on the phone yesterday about getting my 2001 Prelude aligned, corner balanced, and adjusting height of the coilovers. I would like to work out a price. Vince said I will also need some upper control arms and I was thinking about some wheels. I'm looking at the enkei racing series, possibly 17" Rs7 in bronze, but i'm open to suggestions. I would like to keep the price for wheels and tires around $1000 or so. Just let me know what you think. One more quick question, what is the need for upper control arms? Never really heard of needing those for an alignment. Are they needed to adjust camber? Thanks, Glen

04-17-2008, 12:30 PM	#143
CHR!S Tri-State Post Whore Join Date: May 2005 Member #460 My Ride: 2005 Cadillac CTS-V iTrader: (0)	how far in advanced would i need to schedule an appointment to get my s2000 done? im gonna need an allignment, camber/toe adjustment, and corner balancing (the $275 option)

04-17-2008, 02:39 PM	#145
CHR!S Tri-State Post Whore Join Date: May 2005 Member #460 My Ride: 2005 Cadillac CTS-V iTrader: (0)	i havent gotten my suspension in yet, it comes in may 1st. then my 21st bday is may 11th and i come home from cali may 20th... so im prob not gonna be doing much in that time.... plus i need my fenders rolled (do you guys do that as well?) most tracks wont allow me on the track without a one-piece rollbar and/or a hardtop... next year im gonna be making it out to several hpde events & open track days. my friend chris runs honda challenge (the red passwordjdm ek hatch) so hes gonna be my instructor

05-04-2008, 06:46 PM	#147
04AV6 6SPD Tri-State Addict Join Date: May 2007 Location: West Chester, PA Member #4971 My Ride: 04 AV6 6SPD iTrader: (1)	if possible i need basic alignment done sometime tommorow(pm sent earlier)

06-26-2008, 12:36 PM	#148
Matt@R/Ttuning Tri-State Aficionado Join Date: Mar 2008 Member #7252 My Ride: 1985 corolla GTS iTrader: (0)	is everyone up to date and taken care of alignment wise?? we have some free space if anyone wants to squeak in.

06-26-2008, 01:26 PM	#150
04AV6 6SPD Tri-State Addict Join Date: May 2007 Location: West Chester, PA Member #4971 My Ride: 04 AV6 6SPD iTrader: (1)	i need it soon too but have to put in camber kit in back

07-02-2008, 11:20 AM	#151
CHR!S Tri-State Post Whore Join Date: May 2005 Member #460 My Ride: 2005 Cadillac CTS-V iTrader: (0)	i need my car alligned, the camber adjusted, and corner balanced as soon as possible. when would the soonest day id be able to bring the car up there and have it done?

07-02-2008, 12:38 PM	#153
CHR!S Tri-State Post Whore Join Date: May 2005 Member #460 My Ride: 2005 Cadillac CTS-V iTrader: (0)	dropping the car off tonight @ around 7

08-01-2008, 10:25 AM	#156
freewilly Tri-State Training Wheels Join Date: Mar 2007 Member #3924 My Ride: 1991 Toyota MR2 TURBO iTrader: (0)	it says that you can get the proper parts to correct bump steer. Can you ellaborate on this a little bit?

09-08-2008, 03:42 PM	#159
Vince@R/TTuning Vendor Join Date: Mar 2007 Location: telford Pa Member #3958 My Ride: the one in the back of the shop iTrader: (2)	Sorry but we don't have Saturday hours currently, but we are open later during the week to accommodate schedules. Give us a call if you want to schedule something. 215 855 5565 thanx.... __________________ Philadelphia Area's Only Authorized and Factory Trained Pro Tuners for:HONDATA:UPREV:APEXI POWER FC:AEM:COBB:ECUTEK To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need alignment	arkadyzv	(Past Vendors)	1	07-07-2008 10:26 AM
Alignment	russiankid	[TST] Vendors	5	06-26-2008 01:51 PM
need an alignment	CleanNeon98	[TST] Vendors	9	06-19-2007 02:52 PM
i need an alignment??????????	sleepersatty99	General Car Related Chat	9	05-16-2007 10:48 AM
Alignment	OBEEWON	Pennsylvania	21	05-31-2006 12:49 PM