Ttt Universal Parts Sales Defi/aem/greddy/alkie/more

[RayArroyo]

Thats right we are having a huge sale on all of our non vehicle specific parts. This is your time to get some of the best parts in the industry at great prices.





DEFI IMPERIAL 60 MM GAUGES WHITE OR RED

Features:
* Brightness adjustment: 10 stages of brightness, 5 stages in the daytime and 5 stages at night.
* Driving data can be stored and can be replayed up to 3 minutes.
* Double Warning function by a meter's LED lamp and a beep
* If Defi-Link Indicator(sold separately) is connected, it blinks when any of connected meters' warning LED light.
* Defi-Link Indicators can be connected to each gauge.
* Differential pressure between fuel pressure and turbo can be shown if both of fuel pressure meter and turbo meter are installed.
* Gauges have peak hold and warning features All Gauges are 60mm
* Defi-Link Control Unit II is necessary to operate Defi-Link Meter BF.






Boost gauge 195.00
water temp 169.00
fuel pressure 229.00
Oil Pressure 229.00
Oil Temp 169.00
Water temp 169.00
EGT 229.00
Defi Link controller 96.00

DEFI BLUE RACER SERIES



Features:
* Does not require and can't be used with the Defi-Link Control Unit
* Ignition ON initiates self-luminescence gauge.
* Lightning-like Opening / Closing mode with Blue illumination using high-brightness LEDs
* Self-diagnostics function monitors both sensor disconnection and short-circuiting during startup.
* The red triangle of the regular position bezel can be used as a warning indicator.
* Full 270 degrees sweep dial provides ultimate visibility.
* Gauges have peak hold and warning features All Gauges are 52mm (2 1/16")
* Temperature gauge used for Water or Oil- Pressue Gauge used for Fuel or Oil


Boost Gauge 159.00
Pressure gauge 195.00
EGT 183.00
Temperature Gauge 133.00
Volt Gauge 99.00


__________________________________________________ ______________________________
AEM UEGO 6 in 1 Wideband O2 52mm Gauge



249.00



__________________________________________________ _____________________________


AEM Tru-Boost 52mm Gauge Type Boost Controller





Features: 52mm (2 1/16") Complete stand-alone boost controller gauge
On-board pressure sensor included for boost levels up to 29 PSI
Two user selectable units
Peak boost memory
User selectable over boost alarm with overboost shutdown
User scaleable bar graph display
User selectable waste gate delay for quick turbo spool
External warning lamp driver
No external interface required for programming
Easy to install harness allows for quick and easy installation
Boost hose and fittings included for easy hookup to on-board pressure sensor
Multi-Bezel system: includes silver and black bezels, white and black face plates

279.99

__________________________________________________ ______________________________

Greddy Profec B Spec II Boost Controller



Based on the very popular B-Spec, the all new Profec B-Spec II increases boost as easily and accurately as the original, with an added built in boost pressure display and new optional features like real-time, peak or last boost display (in either kPa or PSI). There are optional warning and boost limiter functions that can be programmed to offer much more control. The two presets values can be stored and are executed by a larger capacity inline solenoid valve.
This unit does not require extensive programming and is ideal for low to high boost levels for single or twin turbo systems with actuator or external wastegates. The Greddy Profec B-Spec. II is available in black or silver cased units.

345.00
__________________________________________________ ________________

AEM Water / Alcohol Injection Kit



AEM
The AEM Water Injection Kit is a cost effective and user-friendly alternative to very expensive water injection kits. The AEM Water Injection kit is a perfect way to reduce air inlet temps and increase charge density in boosted vehicles. This AEM kit allows the user to safely run higher boost pressures and suppress detonation allowing the utilization of more timing and boost. AEM's progressively controlled high-pressure pump draws water (or up to a 50% alcohol mixture) from the one gallon tank with integral fluid level sensor to provide boost-dependant variable flow. Your water is fed into the intake system via interchangable nozzles for additional flow control. An integrated system status light mounts on your dash will keep you informed with easily identifiable error codes that include short circuit warnings, battery voltage problems, and low fluid alarms. AEM aslo incorporated a failsafe that provides output to either decrease timing, or reduce boost if the system runs out of fluid or detects any error.


Complete kit includes:
One gallon tank with integral fluid level sensor.
Progressive control 150 PSI pump.
Three different size jets.
Dash mountable warning light.
All hardware & hoses for insallation

359.99

__________________________________________________ __________________________________________________ __

more to come in the am