ECU Conversion Harnesses

[xenocron]

OBD0 to OBD1:



Convert your 1988-1991 civic/crx and 1990-1991 Integra to run any manual OBD1 1992-1995 ecu. Requirements: All civic/crx models must either be a SI or HF or a MPFI(Multi Point Fuel Injection) converted car. DX and Standard models that are DPFI (Dual Point Fuel Injection) must be converted to MPFI for this conversion to work properly. This conversion is primarily made for a 5 speed chassis. You will need an OBD1 ecu, distributor and a 4 wire O2 sensor.

All Harnesses come with detailed instructions for an easy installation. Also included with the harness is a quick disconnect connector that will allow you to feed the sensor wires through the firewall easily. All sensor wires are color coordinated for an easy installation.

OBD2A to OBD1:



Convert your 1996-1998 civic, 1996-1999 Integra, 1996-2001 Prelude and 1996-1997 Accord to run any manual OBD1 1992-1995 ecu. All OBD2 to OBD1 harnesses are manufactured using all brand new OEM pieces only!

OBD2B to OBD1:



Convert your 1999-2000 Civic, 2000-2001 Integra and 1998-2002 Accord to run any manual OBD1 1992-1995 ecu.

OBD0 to OBD1 Distributor Jumper Harness:



This will convert Non-OBD (OBD0) 88-91 MPFI style distributor plugs to the 92-95 style OBD1 plugs. Note: To use a OBD1 Distributor, you must also be using an OBD1 or 2 ECU. (OBD Compliant)

Custom Harnesses are available as well as the following:
- OBD1 to OBD2A
- OBD1 to OBD2B
- OBD2A to OBD2B
- OBD2B to OBD2A