Been a while, new whip.

[sinner]

Hey hey, I haven't really been here in a while. I sold my itr a couple of years ago but it seems that I've caught the bug again. Here's the new ride. She's fully forged built by Agile in Md. I'm hoping to make some of the meets this summer.




2004 GDB SUBARU WRX STi PLATINUM SILVER METALLIC
EXTERIOR:
-Shaved emblems and Decals on Body and Fogs.
-Front Fog CAI Ram Air modification
-CUSCO Rear Diffuser mounting bar.
-05' STi OEM Rear Diffuser.
-HELLA Super Tone Horns in Matte Black.
-ELFI Carbon Fiber Exterior Pillars.
-SEIBON Carbon Fiber wingless trunk.
-Replica Front STi V-lip Poly Urethane.
-Gruppe S Carbon Fiber hood struts.
-Pillar less front grill
-JDM Rear Spats in Platinum silver metallic.
-Black out Rear reverse light overlays.
-STi Black Front Licenses Plate Delete.
-Cleared and Blacked Out Headlights in High Heat Black Ceramic.
-04' Angel Eye kit from Lightwerkz.
-Gallery Fresh rear License plate Black Bolts.

INTERIOR:
-Custom shift boot and Armrest cover in Black & Blue in Alcantra.
-Dry Carbon Fiber Overlayed A/B/C Pillars and Seat Belt Covers.
-Dry Carbon Fiber Overlayed Radio/HVAC Panel, Vent/Hazard Trim, Shifter Trim Surround.
-Dome light assembly and Shifter trim in Satin Black.
-Defi Carbon Fiber center dash gauge pod.
-Defi BF 2 I-Link Controller for Gauges.
-Defi BF 60mm Gauges in Amber (Boost/EGT/Oil Temp).
-JDM Black Embroidered STi Floor mats.
-Petter Solberg Signed 3rd Window Visor in 2005.
-JDM Dead Petal to match existing Pedals.
-Kartboy Short Shifter and Poly bushings.
-Kartboy Rear Shifter bushing.
-Custom Rear Video camera mount
-WC Lathe Werks Black CP Custom Engraved STi Shift Knob.

-COBB Accessport V2 With Custom Pro-tune By Hill @ Agile Auto.
-PERRIN Rotated GT3582R .63AR Hot side.
-PERRIN Rotated Downpipe with Plumbed back External waste gate
-PERRIN Rotated Up-pipe with External Waste gate Thermal Wrapped.
-PERRIN Lightened Crank Pulley.
-PERRIN V2 Side feed Fuel rail kit in Black.
-PERRIN FMIC T-bolt Clamp kit.
-CRAWFORD A/O Separator Universal Kit.
-Thermo Tech wrapped Intercooler piping Graphite Black.
-Thermo Tech wrapped & Black Hi-Heat Coated DP & UP.
-DEI Stainless steel band clamps for Thermal wrap.
-Tial 44mm External Waste gate in Silver.
-Custom Purge TIG Welded CAI Fabricated by Hill @ Agile Auto.
-Walboro 255 Upgraded
-APS 725DR FMIC with Stainless Piping.
-APS Dual Vent FMIC Bypass valve.
-HELIX 860cc Injectors Red Top.
-Apex’i Boost Solenoid Valve controlled by AVC-R.
-Apex’i AVC-R Digital Boost Controller.
-JDM TGV Ported and Polished Housings.
-Phenolic 3mm Insulating spacers with OEM gaskets top & bottom.
-MAGNAFLOW High Flow Resonator in Mid-pipe.
-Autosport In-line Wiring Harness for ECU.
-HELIX 3.5" Full Exhaust with 4 1/4” Tip.
-SAMCO Radiator coolant hoses.
-High Temp Goodridge Black turbo coolant reservoir hoses.
-M1 Development Carbon Fiber Alternator cover.
-STi Fuji Heavy Industries Titanium Front Strut Bar.
-STi Pink 1.3psi Radiator Cap.
-ELFI Brake cylinder & Master cylinder Gold caps.
-Washer fluid cap, Reservoir, and Dip stick in Wrinkle Black.
-CUSCO Blue Master Brake cylinder stiffy brace.
-Optima Red Top Dry Cell Battery.
-Carbon Fiber Battery tie down.
-Project KIC'S Magnetic Drain Plug.
-Gallery Fresh Full Kit BLACK Anodized + Miscellaneous

DRIVETRAIN:
-RPS MAX Clutch .
-Stock STi Resurfaced flywheel @ 25k miles.
-Group N Transmition mount.

SUSPENSION & WHEELS:
-6GUNRACING 2004.5 2005 Hub swap kit 5x114.3 (soon)
-STANCE 2005 Threaded lower collars for GR+ Pro SSD's
-STANCE GR+ Pro's SSD Track Setup 12k/9k spring rates.
-PERRIN V2 Spherical Rear End links.
-CUSCO Rear Stabilizer bar for rear splitter.
-JDM Rear 2005 Splitter valance connected to Cusco Bar.
-McGaurd Spline Drive lug nuts in Onyx Black.
-ARP Extended Wheel studs

[sinner]

The goods

[lownslow95]

Welcome back. Car is looking good. Hopefully I will be able to make it out to some of the meets this summer, if I have time. Do you know if there still doing the I95 rest stop meets?

[sinner]

I don't know but I'd be interested

[lownslow95]

IDK either. I'm sure someone can chime in here if they do.

[Brianb351]

Nice ! Clean! The guys at Agile built my motor and Hill tuned my car and is a great guy. I don't go anywhere else.

[Shipman]

Welcome back, more pics please

[sinner]

Side1

Wrx skirts/strakes coming shortly. ALS considering kstech scoop delete.

[dastpe]

nice setup. what kind of power you putting down? i like the STI wheels but feel like you need a small spacer if you keep them.

[sinner]

Yeah, wheels are going soon. I'm trying to find a set of advan rc2's. They were discontinued a while back. They're hard to find unfortunately. She's running 21 lbs for 451 whp.