DSM Owners (1G, 2G, VR4,...) - Page 115 - TriStateTuners.com :: Home of Tristate Auto Enthusiast

HaveBlue83 · 02-22-2013, 11:48 AM

LOOKING FOR:

STOCK 1g smic soft pipes. have no idea if they will be the correct lengths but I wanted to see if anyone has some.

stover · 03-17-2013, 08:35 PM

my new interior =] just picked it up yesterday, needs a bottom end

DsmRob · 03-17-2013, 08:43 PM

Welcome back

11secdsm · 03-17-2013, 08:46 PM

We need to get a Mitsu track meet going for some time soon. Maybe April? Last weekend when we went we had 5 Mitsus (last second thing).

stover · 03-17-2013, 09:51 PM

Quote:

Originally Posted by 11secdsm

We need to get a Mitsu track meet going for some time soon. Maybe April? Last weekend when we went we had 5 Mitsus (last second thing).

def need to do this hope i can get my car together soon! need a 6 bolt or 7 bolt bottom end

11secdsm · 03-17-2013, 09:53 PM

If you're willing to tear your block down, I have a few good cranks laying around. I'm sure you could easily piece it back together.

stover · 03-17-2013, 10:03 PM

unfortunately i dont want to have it sit with no motor in it at work they wont like that, im trying to build something so i can just swap it out

11secdsm · 03-17-2013, 10:25 PM

Gotcha. I'll keep an eye out for you

stover · 03-18-2013, 09:20 PM

found a 6 bolt picked it up today, looks like it may just need a light hone and ill do rings and bearings and drop it in if thats the case. so the question is clevite 77 or ACL i was told to stay away from topline if im shooting for more then stock power, and do i go aluminum or tri metal ?

also does anyone have a set of mics and a dial bore gauge i can borrow to check my motor? rather not pay a shop to check something i know how to do

2g Talon · 03-18-2013, 09:58 PM

Id go acl race bearings. What hone did you go with? Did you have it hot tanked, or bored?

Sent from my SGH-T999 using Tapatalk 2

stover · 03-18-2013, 10:06 PM

Quote:

Originally Posted by 2g Talon

Id go acl race bearings. What hone did you go with? Did you have it hot tanked, or bored?

Sent from my SGH-T999 using Tapatalk 2

i havnt taken it to machine shop yet i was going to dissasemble and inspect everything myself

EDIT: is there a company any of u guys would trust to call up and say "i just bought a 6 bolt block and need everythign to assemble it" and have them get u a parts list?

2g Talon · 03-18-2013, 11:11 PM

Short answer, no. If you research what you want (bearings, pistons, rods, rings, etc) ane look at pricing, id go extremepsi.com. pretty much a 1 stop shop for us dsmers.

Sent from my SGH-T999 using Tapatalk 2

DsmRob · 03-19-2013, 07:54 PM

I get my oem parts from Jnz.

mckpat03 · 03-19-2013, 09:56 PM

Is that your 54K mile car from Pottstown on Ebay? A friend just sent it to me, lol.

thevidon · 03-19-2013, 11:03 PM

JNZ tuning is local and will hook you up with whatever you need.

11secdsm · 03-19-2013, 11:36 PM

That's def Rob's car on ebay. Sooo clean.

mckpat03 · 03-20-2013, 08:56 AM

Lol, yeah I'd love to have it. Clean seems to be an understatement, haha.

augustburnshred · 03-20-2013, 09:14 AM

Quote:

Originally Posted by HaveBlue83

LOOKING FOR:

STOCK 1g smic soft pipes. have no idea if they will be the correct lengths but I wanted to see if anyone has some.

I believe I still have mine

stover · 03-20-2013, 11:12 AM

well rods, rings, pistons, and bearings isnt what im worried about i know i can pick those out but im not sure what misc gaskets/brakets/bolts/etc ill need to swap this motor in. is the 7 bolt block the same as a 6 bolt other then the crank? will everything swap over?

11secdsm · 03-20-2013, 04:13 PM

Got Final Cut Pro for my iMac so I started playing with it today. It's a start...

http://www.youtube.com/watch?v=QCYCV4-JO38

02-22-2013, 11:48 AM	#2281
HaveBlue83 Tri-State Post Whore Join Date: Apr 2009 Location: Williamsport, PA Member #13212 My Ride: '14 Fiesta ST, 93 Summit Coupe iTrader: (4)	LOOKING FOR: STOCK 1g smic soft pipes. have no idea if they will be the correct lengths but I wanted to see if anyone has some. __________________ '93 4G63T Eagle Summit Coupe \| 95 TSi \| 99 Spyder Guns, Girls & Cars... To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

03-17-2013, 08:35 PM	#2282
stover Tri-State Post Whore Join Date: Jan 2007 Location: allentown nj Member #3483 My Ride: 2005 MINI Cooper S iTrader: (5)	my new interior =] just picked it up yesterday, needs a bottom end __________________ 89 Jetta GLI - VR6 turbo in progress 05 MINI Cooper S - Daily toy

03-17-2013, 08:46 PM	#2284
11secdsm Tri-State Post Whore Join Date: May 2007 Location: Warrington, PA Member #4914 My Ride: '15 F150, '11 535xi, '95 M3, '04 Wrangler iTrader: (2)	We need to get a Mitsu track meet going for some time soon. Maybe April? Last weekend when we went we had 5 Mitsus (last second thing). __________________ -Chris 1995 M3 LS6 swapped 1991 Eclipse auto- 725whp - 5.93@122 1/8 \|\| 9.14 @ 151 2006 Evo IX- 609whp-> (2.3L) \|\| 11.19 @ 128 ->(stock 2.0) SOLD 1997 Supra- 670whp- 10.91 @ 139 SOLD Last edited by 11secdsm; 03-17-2013 at 08:48 PM.

03-17-2013, 09:53 PM	#2286
11secdsm Tri-State Post Whore Join Date: May 2007 Location: Warrington, PA Member #4914 My Ride: '15 F150, '11 535xi, '95 M3, '04 Wrangler iTrader: (2)	If you're willing to tear your block down, I have a few good cranks laying around. I'm sure you could easily piece it back together. __________________ -Chris 1995 M3 LS6 swapped 1991 Eclipse auto- 725whp - 5.93@122 1/8 \|\| 9.14 @ 151 2006 Evo IX- 609whp-> (2.3L) \|\| 11.19 @ 128 ->(stock 2.0) SOLD 1997 Supra- 670whp- 10.91 @ 139 SOLD

03-17-2013, 10:03 PM	#2287
stover Tri-State Post Whore Join Date: Jan 2007 Location: allentown nj Member #3483 My Ride: 2005 MINI Cooper S iTrader: (5)	unfortunately i dont want to have it sit with no motor in it at work they wont like that, im trying to build something so i can just swap it out __________________ 89 Jetta GLI - VR6 turbo in progress 05 MINI Cooper S - Daily toy

03-17-2013, 08:43 PM	#2283
DsmRob Tri-State Addict Join Date: Feb 2009 Location: Pottstown, Pa Member #10847 My Ride: '90 Talon Tsi, '91 Talon Tsi, '92 gvr4, '04 Escape iTrader: (17)	Welcome back

03-17-2013, 10:25 PM	#2288
11secdsm Tri-State Post Whore Join Date: May 2007 Location: Warrington, PA Member #4914 My Ride: '15 F150, '11 535xi, '95 M3, '04 Wrangler iTrader: (2)	Gotcha. I'll keep an eye out for you __________________ -Chris 1995 M3 LS6 swapped 1991 Eclipse auto- 725whp - 5.93@122 1/8 \|\| 9.14 @ 151 2006 Evo IX- 609whp-> (2.3L) \|\| 11.19 @ 128 ->(stock 2.0) SOLD 1997 Supra- 670whp- 10.91 @ 139 SOLD

03-18-2013, 09:20 PM	#2289
stover Tri-State Post Whore Join Date: Jan 2007 Location: allentown nj Member #3483 My Ride: 2005 MINI Cooper S iTrader: (5)	found a 6 bolt picked it up today, looks like it may just need a light hone and ill do rings and bearings and drop it in if thats the case. so the question is clevite 77 or ACL i was told to stay away from topline if im shooting for more then stock power, and do i go aluminum or tri metal ? also does anyone have a set of mics and a dial bore gauge i can borrow to check my motor? rather not pay a shop to check something i know how to do __________________ 89 Jetta GLI - VR6 turbo in progress 05 MINI Cooper S - Daily toy

03-18-2013, 09:58 PM	#2290
2g Talon Tri-State Post Whore Join Date: Aug 2012 Location: North Wales, PA Member #23531 My Ride: 2014 Focus ST iTrader: (0)	Id go acl race bearings. What hone did you go with? Did you have it hot tanked, or bored? Sent from my SGH-T999 using Tapatalk 2 __________________ 2014 Ford Focus ST - Ingot Silver Metallic Heavily modded...

03-18-2013, 11:11 PM	#2292
2g Talon Tri-State Post Whore Join Date: Aug 2012 Location: North Wales, PA Member #23531 My Ride: 2014 Focus ST iTrader: (0)	Short answer, no. If you research what you want (bearings, pistons, rods, rings, etc) ane look at pricing, id go extremepsi.com. pretty much a 1 stop shop for us dsmers. Sent from my SGH-T999 using Tapatalk 2 __________________ 2014 Ford Focus ST - Ingot Silver Metallic Heavily modded...

03-19-2013, 07:54 PM	#2293
DsmRob Tri-State Addict Join Date: Feb 2009 Location: Pottstown, Pa Member #10847 My Ride: '90 Talon Tsi, '91 Talon Tsi, '92 gvr4, '04 Escape iTrader: (17)	I get my oem parts from Jnz.

03-19-2013, 09:56 PM	#2294
mckpat03 Tri-State Post Whore Join Date: Dec 2009 Location: Lewistown, PA Member #15251 My Ride: Mainly VWs iTrader: (0)	Is that your 54K mile car from Pottstown on Ebay? A friend just sent it to me, lol. __________________ - Pat '10 Touareg TDI w/air - deleted/tuned, tow pig, offroad-ish project '15 Sportwagen TDI SEL LP - Daily

03-19-2013, 11:03 PM	#2295
thevidon Tri-State Aficionado Join Date: Jan 2013 Member #24621 My Ride: 2012 Boss 302, 1992 Eclipse GSX iTrader: (0)	JNZ tuning is local and will hook you up with whatever you need. __________________ - Daniel (Sold)2012 Boss 302 - Steeda Suspension build, Laguna Seca splitter/wing, MGW shifter 1992 Eclipse GSX - Old school build - Buschur 20g, Buschur Street FMIC, DSMLink V3 SD

03-19-2013, 11:36 PM	#2296
11secdsm Tri-State Post Whore Join Date: May 2007 Location: Warrington, PA Member #4914 My Ride: '15 F150, '11 535xi, '95 M3, '04 Wrangler iTrader: (2)	That's def Rob's car on ebay. Sooo clean. __________________ -Chris 1995 M3 LS6 swapped 1991 Eclipse auto- 725whp - 5.93@122 1/8 \|\| 9.14 @ 151 2006 Evo IX- 609whp-> (2.3L) \|\| 11.19 @ 128 ->(stock 2.0) SOLD 1997 Supra- 670whp- 10.91 @ 139 SOLD

03-20-2013, 08:56 AM	#2297
mckpat03 Tri-State Post Whore Join Date: Dec 2009 Location: Lewistown, PA Member #15251 My Ride: Mainly VWs iTrader: (0)	Lol, yeah I'd love to have it. Clean seems to be an understatement, haha. __________________ - Pat '10 Touareg TDI w/air - deleted/tuned, tow pig, offroad-ish project '15 Sportwagen TDI SEL LP - Daily

03-20-2013, 11:12 AM	#2299
stover Tri-State Post Whore Join Date: Jan 2007 Location: allentown nj Member #3483 My Ride: 2005 MINI Cooper S iTrader: (5)	well rods, rings, pistons, and bearings isnt what im worried about i know i can pick those out but im not sure what misc gaskets/brakets/bolts/etc ill need to swap this motor in. is the 7 bolt block the same as a 6 bolt other then the crank? will everything swap over? __________________ 89 Jetta GLI - VR6 turbo in progress 05 MINI Cooper S - Daily toy Last edited by stover; 03-20-2013 at 02:58 PM.

03-20-2013, 04:13 PM	#2300
11secdsm Tri-State Post Whore Join Date: May 2007 Location: Warrington, PA Member #4914 My Ride: '15 F150, '11 535xi, '95 M3, '04 Wrangler iTrader: (2)	Got Final Cut Pro for my iMac so I started playing with it today. It's a start... http://www.youtube.com/watch?v=QCYCV4-JO38 __________________ -Chris 1995 M3 LS6 swapped 1991 Eclipse auto- 725whp - 5.93@122 1/8 \|\| 9.14 @ 151 2006 Evo IX- 609whp-> (2.3L) \|\| 11.19 @ 128 ->(stock 2.0) SOLD 1997 Supra- 670whp- 10.91 @ 139 SOLD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
msp and rx8 owners! need your help	fc3spower	Mazda Talk	29	06-02-2010 09:32 PM
any R1 owners?	driftingrx5.7	Motorcycles	9	06-09-2008 12:28 PM
For all the srt-4 owners	05OCsrt-4	Off-Topic	18	06-21-2007 09:12 PM
srt-4 owners, take a look	05OCsrt-4	Off-Topic	40	02-23-2006 03:40 PM