Getting a Intake pipe fabricated - TriStateTuners.com :: Home of Tristate Auto Enthusiast

Bdub215 · 05-10-2012, 07:48 PM

I figured i'd post this in here because some people have better resources then I but i'm looking to get the rest of my Intake Made. By that i mean Elimanate the stock resonator box and the clutter that goes with it and replace it with a standard Metal pipe (with Two outlets for this oddball with twin throttles) If anyone has a good resource let me know.

Bdub215 · 09-14-2012, 07:14 PM

Bump it?

DPancoast · 09-14-2012, 07:22 PM

Where are you located?

Bdub215 · 09-15-2012, 10:14 AM

North Philly.

Sent from my iPhone using Tapatalk

PSIPROformance · 09-17-2012, 07:30 PM

We could take care of that for you! were in lansdale about 20min north of philly.

Bdub215 · 09-17-2012, 10:59 PM

Quote:

Originally Posted by PSIPROformance

We could take care of that for you! were in lansdale about 20min north of philly.

All i need to know is cost. I could stop up after work friday.

90blacktsiawd · 09-19-2012, 08:00 AM

JM Fabrications could also take care of you. They're also in lansdale i believe.

Zaior · 09-19-2012, 09:31 AM

O.o is that their avalon? Isn't that the same motor I have? Lol it's soooo much more cluttered than my bay

Erik@R/TTuning · 09-19-2012, 10:18 AM

Quote:

Originally Posted by 90blacktsiawd

JM Fabrications could also take care of you. They're also in lansdale i believe.

I was going to make this suggestion or Nate Dog Creations in Lansdale.

Bdub215 · 09-19-2012, 10:53 PM

Quote:

Originally Posted by Erik@R/TTuning

I was going to make this suggestion or Nate Dog Creations in Lansdale.

JM Fab is a bit of a drive for me. in rush hour traffic its not worth it.

TalonTsi97 · 09-19-2012, 11:22 PM

PSI PROformance or JMF !

16vconversion · 10-22-2012, 06:52 AM

That car Looks oddly like the car I fabbed an intake for , hmmm maybe we need more pics !!!

OutToWinPAHC · 10-22-2012, 07:29 AM

I bought mine measured and marked the bung and had one motion weld it, then LPC powder coat it. Total cost was about 60. CXracing sells a good bit of pipe and bends, the pipe was 28 shipped and was a 75 degree 3.0 inch 2 foot long piece.

Bdub215 · 10-24-2012, 12:53 PM

finished product

16vconversion · 11-09-2012, 09:37 PM

Bang ! Problem solved.

Bdub215 · 11-10-2012, 02:26 AM

Quote:

Originally Posted by 16vconversion

Bang ! Problem solved.

I'll be coming to see you again real soon.

Sent from my thoughts using Tapatalk

05-10-2012, 07:48 PM	#1
Bdub215 Tri-State Post Whore Join Date: Apr 2010 Location: Philadelphia/Cheltenham Member #16318 My Ride: 1993 Lexus ES300 "ES 5Spd" iTrader: (0)	Getting a Intake pipe fabricated I figured i'd post this in here because some people have better resources then I but i'm looking to get the rest of my Intake Made. By that i mean Elimanate the stock resonator box and the clutter that goes with it and replace it with a standard Metal pipe (with Two outlets for this oddball with twin throttles) If anyone has a good resource let me know. __________________ 93 Lexus ES300 I/E UR FSB UR 19mm RSB 92 Lexus SC300 Stock Grocery Getter Crew (GGC) To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

09-14-2012, 07:14 PM	#2
Bdub215 Tri-State Post Whore Join Date: Apr 2010 Location: Philadelphia/Cheltenham Member #16318 My Ride: 1993 Lexus ES300 "ES 5Spd" iTrader: (0)	Bump it? __________________ 93 Lexus ES300 I/E UR FSB UR 19mm RSB 92 Lexus SC300 Stock Grocery Getter Crew (GGC) To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

09-15-2012, 10:14 AM	#4
Bdub215 Tri-State Post Whore Join Date: Apr 2010 Location: Philadelphia/Cheltenham Member #16318 My Ride: 1993 Lexus ES300 "ES 5Spd" iTrader: (0)	North Philly. Sent from my iPhone using Tapatalk __________________ 93 Lexus ES300 I/E UR FSB UR 19mm RSB 92 Lexus SC300 Stock Grocery Getter Crew (GGC) To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

09-17-2012, 07:30 PM	#5
PSIPROformance Vendor Join Date: Nov 2009 Location: Lansdale Pa Member #15082 iTrader: (0)	We could take care of that for you! were in lansdale about 20min north of philly. __________________ Dyno Tuning-Engine Swaps-Engine Building-Turbo Kits-Fabrication-General Repairs-State Inspection& Emissions *To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.* To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. \ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. 200 W 5th St (Suite 104) Lansdale PA 19446 215-361-7100

09-19-2012, 11:22 PM	#11
TalonTsi97 TST Ruined My Life! Join Date: Jan 2005 Member #136 My Ride: 1997 Eagle Talon iTrader: (21)	PSI PROformance or JMF ! __________________ 1997 Eagle Talon Tsi To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Updated weekly with Dyno, Track, AutoX, Street, and Event videos. Big updates coming soon! To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

09-19-2012, 08:00 AM	#7
90blacktsiawd Tri-State Aficionado Join Date: Aug 2007 Member #5662 iTrader: (0)	JM Fabrications could also take care of you. They're also in lansdale i believe.

10-22-2012, 06:52 AM	#12
16vconversion Tri-State Training Wheels Join Date: Mar 2011 Location: Levittown/Morrisville Member #19999 My Ride: 89 Omni 2.5/2.0 Dohc Holset iTrader: (0)	That car Looks oddly like the car I fabbed an intake for , hmmm maybe we need more pics !!!

10-22-2012, 07:29 AM	#13
OutToWinPAHC Tri-State Post Whore Join Date: Jun 2007 Location: Tokelau Member #5081 My Ride: R33 GTS25T, RHD E46, Truck, part R32 GTR iTrader: (2)	I bought mine measured and marked the bung and had one motion weld it, then LPC powder coat it. Total cost was about 60. CXracing sells a good bit of pipe and bends, the pipe was 28 shipped and was a 75 degree 3.0 inch 2 foot long piece.

10-24-2012, 12:53 PM	#14
Bdub215 Tri-State Post Whore Join Date: Apr 2010 Location: Philadelphia/Cheltenham Member #16318 My Ride: 1993 Lexus ES300 "ES 5Spd" iTrader: (0)	finished product __________________ 93 Lexus ES300 I/E UR FSB UR 19mm RSB 92 Lexus SC300 Stock Grocery Getter Crew (GGC) To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

11-09-2012, 09:37 PM	#15
16vconversion Tri-State Training Wheels Join Date: Mar 2011 Location: Levittown/Morrisville Member #19999 My Ride: 89 Omni 2.5/2.0 Dohc Holset iTrader: (0)	Bang ! Problem solved.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2g intake pipe	turbo4g63	Engine Performance	4	03-29-2006 09:12 PM