Nissan Injector Upgrades

[highmilehatch]

For those of you looking for cost effective, high quality Nissan injectors, look no further. Of course, proper engine management must be used.



SR20DET, SR20DE, KA24DE

Simple drop-in replacements, sets of four
12-month warranty
Includes full color Injector Report
Used on the Street Solutions 95 240SX
Installations available


FITMENT

These injectors are sidefeed (galley type) high impedance injectors. They will fit the stock fuel rail and injector harness connectors for most Nissans that use sidefeed injectors. 555cc size and 740cc size are compatible with off the shelf ROM tunes for Nismo 555cc and 740cc. Works with the following:

1991-1999 Sentra SR20DE
1991-1997 240sx KA24DE
1991-1999 Silvia/180sx SR20DET

No collars to find, no plugs to swap over, no resistors to wire in, no special fuel rail needed - just drop in, tune, and go.


480cc - $240.00 shipped 48 states

555cc - $300.00 shipped 48 states

650cc - $310.00 shipped 48 states

740cc - $360.00 shipped 48 states





VQ35DE

Simple drop-in replacements, sets of six
Available in 440cc, 550cc, 650cc sizes for your turbo 350z
12-month warranty
Includes full color Injector Report
Installations available


Fitment:

These injectors are top feed high impedance injectors. They will fit the stock fuel rail AND injector harness connectors for the VQ35 (350z or Maxima) These are the ONLY VQ35 high flow injector that is a 100% direct swap for the factory injectors. These injectors have been tested along side APS and RC Engineering on the Deatschwerks in-house flow bench. The DeatschWerks VQ35 injectors have been proven to have a better spray pattern and more precise flow rates. No collars to find, no plugs to swap over, no resistors to wire in, no special fuel rail or adaptor needed - just drop in, tune, and go.


440cc - $400.00 shipped 48 states

550cc - $410.00 shipped 48 states

650cc - $420.00 shipped 48 states