Camaro's - Page 4 - TriStateTuners.com :: Home of Tristate Auto Enthusiast

01 Trans-Am WS6 · 05-25-2009, 12:03 AM

2001 Trans-Am WS6 here....cammed, full bolt-ons, Spec Stage 3 clutch. 12.56 @ 115 best time so far and dyno'd 407RWHP and 382 ft.-lbs. Still running street tires BTW, with a 9'' or 12-bolt rear and some good tires i'll be high 11's as it sits motor wise. After that is spray.

98Z28camarojg · 03-31-2011, 04:02 PM

1998 Black Z28 with 6-speed. Mods are in my sig! If you see it on the road, you'll hear it first haha

Kahdir · 07-29-2011, 07:36 PM

2010 SS w/ LS3 (6M) Airaid intake, Corsa exhaust, Hurst shifter & Eibach springs and sways.

Looking to change gears to 4.11s, billet caps & LPW diff and then headers.

dugganzx3 · 08-09-2011, 11:01 PM

I was just considering starting something like this, but this doesn't look dead so here we go.

1996 Chevy Camaro RS y87 fully loaded with leather and t-tops, 3.8l stock(for now) with an exhaust. Has 3:42's with a posi and is a 5 speed. The plans are a new pcm with a tune, cai, and eventually an n/a build up with stage 1 cam, valves, springs, etc. Hopefully 2 inch drop with some different wheels eventually. Has a few visual mods too, nothing crazy.

So are any of you F body guys in the Scranton area and still active here, a few of my friends and I chill at sheetz and some other places at night if anyone is interested.

PhillyLS1 · 08-11-2011, 07:54 AM

I've started to become active again in the Philly area now that my job has settled down some. Good to see other mullets out there.

OMGz Turbo · 08-11-2011, 10:06 AM

Quote:

Originally Posted by PhillyLS1

I've started to become active again in the Philly area now that my job has settled down some. Good to see other mullets out there.

I was showing my brother your youtube vids. LOL ****ing monster

PhillyLS1 · 08-11-2011, 10:18 AM

Quote:

Originally Posted by OMGz Turbo

I was showing my brother your youtube vids. LOL ****ing monster

Its faster and lighter now. I re-did the whole engine bay. I'll post picks when its done.

89StangGT · 08-26-2011, 07:29 PM

Quote:

Originally Posted by PhillyLS1

I've started to become active again in the Philly area now that my job has settled down some. Good to see other mullets out there.

Im OMGz brother but in my opinion you have THE nicest camaro in the philly area.

SleeperGoat · 09-02-2011, 01:01 AM

There was a dude up in quakertown with a crazy setup like that but recently sold it to buy a house. Almost sold my GTO for it he drove the damn thing everywhere and was still capable of amazing things lol.

lsx427 · 03-26-2012, 09:40 PM

2010 camaro with an lsx 427 and a procharger F1C. Mini tubbed for 345s

PAFirefighter11 · 03-27-2012, 03:13 PM

Quote:

Originally Posted by lsx427

2010 camaro with an lsx 427 and a procharger F1C. Mini tubbed for 345s

lsx427 · 03-27-2012, 10:40 PM

Its currently in michigan getting mini tubbed and cage installed. This is when it had a kenne bell 3.6 on top of an lsx 416.

lsx427 · 03-27-2012, 10:40 PM

Here it is.

BlueEyedSuicide4 · 11-13-2012, 05:01 PM

2001 Pontiac Trans Am WS6 with over 105k miles

sti04dude · 09-25-2013, 08:19 PM

Woo hoo...first Camaro post in almost 1 year !
I used to have an STi, now I have this:

dugganzx3 · 11-09-2013, 05:52 PM

Quote:

Originally Posted by sti04dude

Woo hoo...first Camaro post in almost 1 year !
I used to have an STi, now I have this:

freakin love it man, that color looks great.

doug · 11-09-2013, 06:42 PM

Mach1 · 01-03-2014, 01:53 PM

I just cant get into the new Camaro style, the revamp this year makes it a LITTLE better to me, but after the 80's early 90's body style they just haven't been appealing to me. I do really love the drivetrains that Chevy uses. Just not the body styles. The WS6 Trans-Am, those I freaking LOVE.

My dad was a huge Camaro fan when he was younger, he had a 69 RS/SS Pace Car, and he refuses to accept the new ones as a Camaro. It's driven him to actually start liking Mustangs.

lsx427 · 02-03-2014, 09:20 PM

Nice ZL1, This is my SS

03-31-2011, 04:02 PM	#62
98Z28camarojg Tri-State Training Wheels Join Date: Dec 2010 Location: Downingtown, PA Member #18568 My Ride: 1998 Camaro Z28 iTrader: (0)	1998 Black Z28 with 6-speed. Mods are in my sig! If you see it on the road, you'll hear it first haha __________________ K&N Int., Koni Front Shocks, Bilstein Rear Shocks, Thicker Sway Bars, SFC's, B&M Shifter, Centerforce Clutch, Fidanza Flywheel, Pacesetter LT's, TSP ORY, LM1 Cat-Back, Removed EGR AIR and A/C Belt, LS6 Int. Man., P+P TB, K&N Intake, 355rwhp/366ft.lbs.

08-09-2011, 11:01 PM	#64
dugganzx3 Tri-State Addict Join Date: Oct 2010 Location: Scranton PA Member #17852 My Ride: has leather and T-tops. iTrader: (0)	I was just considering starting something like this, but this doesn't look dead so here we go. 1996 Chevy Camaro RS y87 fully loaded with leather and t-tops, 3.8l stock(for now) with an exhaust. Has 3:42's with a posi and is a 5 speed. The plans are a new pcm with a tune, cai, and eventually an n/a build up with stage 1 cam, valves, springs, etc. Hopefully 2 inch drop with some different wheels eventually. Has a few visual mods too, nothing crazy. So are any of you F body guys in the Scranton area and still active here, a few of my friends and I chill at sheetz and some other places at night if anyone is interested. __________________ Daily-1996 Chevy Camaro RS y87 (3800 sII v6, t-5, bolt-ons, tune) Project-1980 Chevy Camaro Base (305 v8, th350)

08-11-2011, 07:54 AM	#65
PhillyLS1 Tri-State Addict Join Date: Dec 2006 Location: Ft. Meade Member #3221 My Ride: 00 Camaro SS 11 Mustang 11 GS Vette iTrader: (0)	I've started to become active again in the Philly area now that my job has settled down some. Good to see other mullets out there. __________________ "To be loved is to be fortunate, but to be hated is to achieve distinction.. " Please put me on ignore if you feel the need to read into my signatures or are a sensitive boy/girl. Your Friend, PhillyLS1 -- Currently Home/Deployed.

09-02-2011, 01:01 AM	#69
SleeperGoat Tri-State Post Whore Join Date: Jan 2007 Location: Dolyestown-Pa Member #3339 My Ride: 84 Camaro/ 05 GTO iTrader: (0)	There was a dude up in quakertown with a crazy setup like that but recently sold it to buy a house. Almost sold my GTO for it he drove the damn thing everywhere and was still capable of amazing things lol. __________________ formerly BlackZ05 05 Nissan 350z- Sold! 84 Camaro- Project from Hell car now Stripped an being Sanded.....Slowly no weekend life anymore 05 GTO - Push Button Performance w/ spooling action

01-03-2014, 01:53 PM	#78
Mach1 Tri-State Addict Join Date: May 2007 Location: Delco, PA Member #4603 My Ride: 2014 Altima S iTrader: (0)	I just cant get into the new Camaro style, the revamp this year makes it a LITTLE better to me, but after the 80's early 90's body style they just haven't been appealing to me. I do really love the drivetrains that Chevy uses. Just not the body styles. The WS6 Trans-Am, those I freaking LOVE. My dad was a huge Camaro fan when he was younger, he had a 69 RS/SS Pace Car, and he refuses to accept the new ones as a Camaro. It's driven him to actually start liking Mustangs. __________________ Present: 2018 Q50 RED SPORT 400 AWD JB1 - 20% Tint Past: 1991 Taurus GL, 2001 Escort ZX2, 2000 Escort ZX2 S/R, 2003 Mach1, 2014 Altima 2.5 S Last edited by Mach1; 01-03-2014 at 01:55 PM.

05-25-2009, 12:03 AM	#61
01 Trans-Am WS6 Tri-State Addict Join Date: Oct 2008 Location: Poconos, PA Member #9111 My Ride: LSB E46 M3-BBY Evo VIII-FD RX7-TB Evo VIII-AS Evo VIII-G35 S/C-B7 A4-410whpWs6-3kGT iTrader: (0)	2001 Trans-Am WS6 here....cammed, full bolt-ons, Spec Stage 3 clutch. 12.56 @ 115 best time so far and dyno'd 407RWHP and 382 ft.-lbs. Still running street tires BTW, with a 9'' or 12-bolt rear and some good tires i'll be high 11's as it sits motor wise. After that is spray.

07-29-2011, 07:36 PM	#63
Kahdir Tri-State Training Wheels Join Date: Apr 2011 Location: PA Member #20357 My Ride: 2010 Chevrolet Camaro iTrader: (0)	2010 SS w/ LS3 (6M) Airaid intake, Corsa exhaust, Hurst shifter & Eibach springs and sways. Looking to change gears to 4.11s, billet caps & LPW diff and then headers.

03-26-2012, 09:40 PM	#70
lsx427 Tri-State Training Wheels Join Date: Mar 2012 Member #22849 iTrader: (0)	2010 camaro with an lsx 427 and a procharger F1C. Mini tubbed for 345s

03-27-2012, 10:40 PM	#72
lsx427 Tri-State Training Wheels Join Date: Mar 2012 Member #22849 iTrader: (0)	Its currently in michigan getting mini tubbed and cage installed. This is when it had a kenne bell 3.6 on top of an lsx 416.

11-13-2012, 05:01 PM	#74
BlueEyedSuicide4 Tri-State Addict Join Date: Nov 2012 Member #23844 My Ride: 2001 Pontiac Trans Am WS6 iTrader: (0)	2001 Pontiac Trans Am WS6 with over 105k miles

09-25-2013, 08:19 PM	#75
sti04dude Tri-State Training Wheels Join Date: May 2010 Location: TriState Member #16577 My Ride: ZL1 Camaro iTrader: (0)	Woo hoo...first Camaro post in almost 1 year ! I used to have an STi, now I have this:

11-09-2013, 06:42 PM	#77
doug Tri-State Post Whore Join Date: May 2005 Location: Springfield, PA Member #450 My Ride: 2007 WRX STi Limited, 1969 Z/28 Camaro iTrader: (1)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Calling all camaro's	84camaro	Domestic	0	06-29-2005 12:19 AM