What Did You Do To Your Mazda Today!!! - Page 30 - TriStateTuners.com :: Home of Tristate Auto Enthusiast

TalonTsi97 · 03-27-2011, 01:28 AM

Quote:

Originally Posted by Outlawstar98

Been awhile. Cant remember what I posted in here last and im to lazy to look lol!
But my build motor now has 1600miles on it. STill breaking it in but driving it like a reg. daily driver now. the GT3071R is nice. I need a tune badly. Imstalled a new/better headunit so i can run off my iphone. Carbon Fiber fenders in my basement i MIGHT install. dont know yet due to the flaws but I do plan on tracking it... Ordered a trailing link and trailer arms set so I can run wider tires in the back and it will be better adjustable. I still need tune like i said already but not being able to go on the gas the whole way sucks cause I hit fuel cut. hm... thats all I can think of for now. But today I installed the headunit

haha

What do you plan to tune it with?
Were you at R/T tuning today for a bit? Swear i saw a quick glimpse of a cars similar to yours but never got to see it up close.

Protege v2.5 · 03-27-2011, 06:39 PM

dropped off my rear lip for paint. If it wasnt for the rust starting to form on the 1/4 panel and around windshield I could say the exterior was finally done.

xdrift0rx · 03-27-2011, 07:10 PM

went from

to this.

disstractin_FC · 03-27-2011, 07:14 PM

Completely changing the setup for the car, going for a Time attack setup and im excited! ill post some pics when i get home

l337fpc · 03-29-2011, 07:45 AM

where are you going to race for TT? I'd love to see another ported rotary racing.

rotarychainsaw · 03-29-2011, 10:40 AM

Had to take the door panel off and tighten up the door handle bolts. Thing was gonna rip out if I opened the door too hard. Also put in a new (used) seat that is not all tore up. I think its a jdm passenger seat though cause the slider is different and it was missing the lapbelt holder.

xdrift0rx · 03-29-2011, 12:07 PM

added a diagnostic checker. blinks for different codes since the car doesn't have a check engine light. it has shown two different codes so far.

Outlawstar98 · 03-29-2011, 09:24 PM

Quote:

Originally Posted by TalonTsi97

What do you plan to tune it with?
Were you at R/T tuning today for a bit? Swear i saw a quick glimpse of a cars similar to yours but never got to see it up close.

Yep I was at RT tuning for that dyno event. But going to be getting a Hualtech Sprint 500.

lepichichi · 03-31-2011, 01:18 PM

Quote:

Originally Posted by disstractin_FC

Completely changing the setup for the car, going for a Time attack setup and im excited! ill post some pics when i get home

cool, set up???

Silverfc88 · 03-31-2011, 01:56 PM

Quote:

Originally Posted by rotarychainsaw

Had to take the door panel off and tighten up the door handle bolts. Thing was gonna rip out if I opened the door too hard. Also put in a new (used) seat that is not all tore up. I think its a jdm passenger seat though cause the slider is different and it was missing the lapbelt holder.

I hate the FC door handles. Both of mine have brackets riveted in because they have both been broken at one time.

Remapped the split timing table map. I was running negative split in vacuum, but changed it to zero split to 2-3 degrees split. I was having some throttle harshness during partial throttle like cruising with the negative split. Throttle response is a little better now and the exhaust doesn't backfire/pop as much.

Split up top stayed about the same. 10psi is around 10 degrees and 16+psi is at 15 degrees for a little safety margin.

disstractin_FC · 03-31-2011, 03:34 PM

been busy and not getting enough work done on the 7

. BUT, im starting on the vmount setup today and hopefully i can get the coilovers by the end of the week. Im really having a problem with this side exhaust idea i have but if it manages to work it will be sickkk.

l337fpc, im completely new to the timed racing world so im not sure what class i will be thrown into.

l337fpc · 03-31-2011, 06:13 PM

well it seems that with most organizations like NASA or SCCA...you need to have a lot of track time under your belt before you can try and get racing licenses. I need 4 NASA HPDE's and then I can try and get a competition license next year (Only offered @ NJMP at the beginning of the year). I still don't know what class I'll be in for either TT or wheel to wheel races.

mazda1993 · 04-01-2011, 09:57 AM

I install Ground control coil over on my Familia....Its slammed now!

blue08mz3hb · 04-04-2011, 05:12 PM

no mods lately but did get some good shots at the parks along rt. 191 in East Stroudsburg

ndubz · 04-04-2011, 07:10 PM

Spent 200 dollars, thats what. more to come too. Im doin the exhaust all at once on the miata now that the suspension is done.

l337fpc · 04-04-2011, 09:05 PM

picked up slotted rotors, those are going in on wednesday. awwww yea.

fitftw · 04-05-2011, 08:53 AM

in the past week
removed power locks

Flyin' Miata Stage 2 fan shroud kit with Spal fans and a Koyo 37mm radiator

black Muteki lugs

and for the hell of it, I love GT5 with a wheel setup.

l337fpc · 04-07-2011, 06:06 AM

stoptech rotors and hawk hps pads. nasty setup.

crazyduckme · 04-07-2011, 10:06 AM

New pics!!!

l337fpc · 04-07-2011, 10:23 AM

either thats a fresh paint job on those emblems or you detailed the hell out of them. i love seeing a clean white car.

03-27-2011, 07:14 PM	#584
disstractin_FC Tri-State Aficionado Join Date: Feb 2008 Location: South jersey Member #6820 My Ride: 1987 Rx7 iTrader: (1)	Completely changing the setup for the car, going for a Time attack setup and im excited! ill post some pics when i get home __________________ 1987 FC3S: 1990 13bt, Half-Bridge port, microtech FMIC, custom exhaust, Ksport Kontrolpro coilovers, MMR delrin bushings ,S370 BW turbo, KG rails, 750cc(2), 1680cc(2), gilmer drive,etc... To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

03-29-2011, 07:45 AM	#585
l337fpc Tri-State Addict Join Date: Oct 2008 Member #9093 My Ride: 2004 Mazda RX-8 GT iTrader: (0)	where are you going to race for TT? I'd love to see another ported rotary racing. __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

03-31-2011, 03:34 PM	#591
disstractin_FC Tri-State Aficionado Join Date: Feb 2008 Location: South jersey Member #6820 My Ride: 1987 Rx7 iTrader: (1)	been busy and not getting enough work done on the 7 . BUT, im starting on the vmount setup today and hopefully i can get the coilovers by the end of the week. Im really having a problem with this side exhaust idea i have but if it manages to work it will be sickkk. l337fpc, im completely new to the timed racing world so im not sure what class i will be thrown into. __________________ 1987 FC3S: 1990 13bt, Half-Bridge port, microtech FMIC, custom exhaust, Ksport Kontrolpro coilovers, MMR delrin bushings ,S370 BW turbo, KG rails, 750cc(2), 1680cc(2), gilmer drive,etc... To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

03-31-2011, 06:13 PM	#592
l337fpc Tri-State Addict Join Date: Oct 2008 Member #9093 My Ride: 2004 Mazda RX-8 GT iTrader: (0)	well it seems that with most organizations like NASA or SCCA...you need to have a lot of track time under your belt before you can try and get racing licenses. I need 4 NASA HPDE's and then I can try and get a competition license next year (Only offered @ NJMP at the beginning of the year). I still don't know what class I'll be in for either TT or wheel to wheel races. __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

04-04-2011, 05:12 PM	#594
blue08mz3hb Tri-State Training Wheels Join Date: Mar 2011 Location: East Stroudsburg, PA Member #20249 My Ride: 2008 Mazda 3 HB iTrader: (0)	no mods lately but did get some good shots at the parks along rt. 191 in East Stroudsburg __________________ ~ 08 Mazda 3<<<<< To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. East Stroudsburg University To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

03-27-2011, 06:39 PM	#582
Protege v2.5 Tri-State Addict Join Date: Mar 2008 Location: SoLanCo Member #7303 My Ride: 2016 Mazda 6 iTrader: (1)	dropped off my rear lip for paint. If it wasnt for the rust starting to form on the 1/4 panel and around windshield I could say the exterior was finally done.

03-27-2011, 07:10 PM	#583
xdrift0rx Tri-State Aficionado Join Date: Oct 2010 Location: Wilmington, DE Member #17727 My Ride: 1987 Mazda RX-7 iTrader: (1)	went from to this.

03-29-2011, 10:40 AM	#586
rotarychainsaw Tri-State Aficionado Join Date: Jul 2007 Location: Philly/Bradley Beach Member #5338 My Ride: 2002 m5 iTrader: (0)	Had to take the door panel off and tighten up the door handle bolts. Thing was gonna rip out if I opened the door too hard. Also put in a new (used) seat that is not all tore up. I think its a jdm passenger seat though cause the slider is different and it was missing the lapbelt holder.

03-29-2011, 12:07 PM	#587
xdrift0rx Tri-State Aficionado Join Date: Oct 2010 Location: Wilmington, DE Member #17727 My Ride: 1987 Mazda RX-7 iTrader: (1)	added a diagnostic checker. blinks for different codes since the car doesn't have a check engine light. it has shown two different codes so far.

04-01-2011, 09:57 AM	#593
mazda1993 Tri-State Aficionado Join Date: Mar 2011 Member #20232 My Ride: Mazda Familia AWD 1991 iTrader: (0)	I install Ground control coil over on my Familia....Its slammed now!

04-04-2011, 07:10 PM	#595
ndubz Tri-State Post Whore Join Date: Oct 2007 Location: tristate area Member #6107 iTrader: (1)	Spent 200 dollars, thats what. more to come too. Im doin the exhaust all at once on the miata now that the suspension is done.

04-04-2011, 09:05 PM	#596
l337fpc Tri-State Addict Join Date: Oct 2008 Member #9093 My Ride: 2004 Mazda RX-8 GT iTrader: (0)	picked up slotted rotors, those are going in on wednesday. awwww yea. __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

04-05-2011, 08:53 AM	#597
fitftw Tri-State Post Whore Join Date: Dec 2009 Location: CNJ Member #15351 My Ride: 96 Miata 2,040lbs full tank, hardtop, half-cage iTrader: (0)	in the past week removed power locks Flyin' Miata Stage 2 fan shroud kit with Spal fans and a Koyo 37mm radiator black Muteki lugs and for the hell of it, I love GT5 with a wheel setup. __________________ 96 Miata gutted toy car 94 Shadow DD To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

04-07-2011, 06:06 AM	#598
l337fpc Tri-State Addict Join Date: Oct 2008 Member #9093 My Ride: 2004 Mazda RX-8 GT iTrader: (0)	stoptech rotors and hawk hps pads. nasty setup. __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

04-07-2011, 10:23 AM	#600
l337fpc Tri-State Addict Join Date: Oct 2008 Member #9093 My Ride: 2004 Mazda RX-8 GT iTrader: (0)	either thats a fresh paint job on those emblems or you detailed the hell out of them. i love seeing a clean white car. __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
RHD Mazda 6	Maxxdsix	(Past Vendors)	2	08-26-2010 01:12 PM
The Mazda MX-3	wheresmycar	General Car Related Chat	5	07-12-2009 05:43 PM
'88 mazda rx-7 n/a...(for now)..	fc3spower	Member Journals	7	06-01-2008 09:08 PM
Took these today thought they were cool...EDIT more pics added from today!!!	S4toSTI	Gallery	20	10-24-2005 09:06 PM