JNZtuning?? - TriStateTuners.com :: Home of Tristate Auto Enthusiast

EklipzGSXkid · 02-02-2011, 12:23 PM

I'm just curious to see if they are still open? I have been trying to call for the past few hours (realized an hour ago they open at 10 though), But still it does not ring and goes right to a voice mail.

All I need to do is order a 2g j-pipe/licp that will route from a 14b/16g varient to the stock location smic for a car in my garage. I need these parts ordered right now and here ASAP which is why I'm trying to order from a local company. I checked the vendor section but can't find any on any of the vendors websites.

If anyone could sell me one (vendors ETC), I will call you as soon as you reply. I don't care who I buy from, I just need it ASAP !!!!

Thanks!

Erik@R/TTuning · 02-02-2011, 01:32 PM

They are not a vendor on TST. They are still in business as far as I know though. Chances are they have no power like many businesses in this area this morning.

EklipzGSXkid · 02-02-2011, 01:33 PM

Erik,

Thank you for the reply. I did not realize that part of the area was out of power!!

DPancoast · 02-02-2011, 01:36 PM

if i saw this earlier i would have stopped over there. if you still have no luck, message me and I can go stop by if im not busy

Erik@R/TTuning · 02-02-2011, 01:36 PM

Yeah, TONS of power outages in Bucks.
That said I can have a J-pipe and lower in the mail for you pretty quick. $130 plus shipping. This will route a 16G to a stock 2G SMIC.

EklipzGSXkid · 02-02-2011, 01:47 PM

Erik,

I hate to ask, But do you think it would be here by monday? I could order one on ebay for $50, But I honestly do not want to do that and wait any longer. If I had more time I would just do that but the car is not mine and they need it for Monday evening, So I am willing to pay the higher price.

I found this one: http://www.extremepsi.com/store/cust...cat=336&page=2 , And was just going to order that but if you can get basically the same one for the same price, I would much rather just order through you being you are a vendor on the site.

If you can meet my deadline (sorry, once again), Then I can pm you all of my billing and shipping information!

Thank you for posting, I really appreciate it

Erik@R/TTuning · 02-02-2011, 02:08 PM

What area are you from bud? I don't think it would be a problem as long as you aren't outside the tristate area.

(I think I can do a little bit better on the price for you too)

EklipzGSXkid · 02-02-2011, 02:38 PM

I'm in Hazleton PA, 18201. ! If you can check to see if you could do it, When you are ready to take my information please just send me a quick pm with the total and I'll send you all my information (shipping and billing), through PM, And you can get it taken care of. Any help would be greatly appreciated!

Erik@R/TTuning · 02-02-2011, 05:21 PM

PM coming your way!

TalonTsi97 · 02-02-2011, 05:50 PM

Go with R/t i doubt jnz will be getting it to you fast enough at this point

Erik@R/TTuning · 02-02-2011, 06:04 PM

It feels like old times selling DSM parts Chip. :D

DPancoast · 02-02-2011, 06:08 PM

vendor service at its finest!

Sberk06 · 02-02-2011, 07:53 PM

i've ordered parts from extremepsi in the morning and had them the following afternoon....

TalonTsi97 · 02-02-2011, 08:31 PM

Quote:

Originally Posted by Erik@R/TTuning

It feels like old times selling DSM parts Chip. :D

hahaha gotta do what ya gotta do

and to confirm it YES, JNZ did have no power all day.

EklipzGSXkid · 02-03-2011, 02:18 AM

Thank you for the advice!!

Erik: I must have just missed you this evening (Around 6pm or a few minutes after). I'll give you a call tomorrow morning so I can get the order placed! this worked out great (Got your pm aswell).

OMGz Turbo · 02-03-2011, 10:15 AM

Quote:

Originally Posted by Sberk06

i've ordered parts from extremepsi in the morning and had them the following afternoon....

You sure...they coulda over nighted it from japan...i mean they are on a different time zone from us, so it could result in same day service

EklipzGSXkid · 02-03-2011, 11:22 AM

Order placed, Through Erik At r/t. Thank you everyone for the help.

Erik@R/TTuning · 02-03-2011, 11:49 AM

Glad to help you out Rob.

02-02-2011, 12:23 PM	#1
EklipzGSXkid Tri-State Post Whore Join Date: Apr 2007 Location: PA Member #4554 iTrader: (13)	JNZtuning?? I'm just curious to see if they are still open? I have been trying to call for the past few hours (realized an hour ago they open at 10 though), But still it does not ring and goes right to a voice mail. All I need to do is order a 2g j-pipe/licp that will route from a 14b/16g varient to the stock location smic for a car in my garage. I need these parts ordered right now and here ASAP which is why I'm trying to order from a local company. I checked the vendor section but can't find any on any of the vendors websites. If anyone could sell me one (vendors ETC), I will call you as soon as you reply. I don't care who I buy from, I just need it ASAP !!!! Thanks!

02-02-2011, 05:50 PM	#10
TalonTsi97 TST Ruined My Life! Join Date: Jan 2005 Member #136 My Ride: 1997 Eagle Talon iTrader: (21)	Go with R/t i doubt jnz will be getting it to you fast enough at this point __________________ 1997 Eagle Talon Tsi To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Updated weekly with Dyno, Track, AutoX, Street, and Event videos. Big updates coming soon! To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
White Evo X in Cherry Hill w/ JNZtuning Sticker	DTM2188	Spotted!	4	09-05-2008 03:16 PM
JNZtuning Open House	JNZTuning	Upcoming Events	26	02-11-2007 11:47 AM

02-02-2011, 01:32 PM	#2
Erik@R/TTuning Former Vendor Join Date: Aug 2010 Member #17281 My Ride: 2000 MR2 Spyder iTrader: (1)	They are not a vendor on TST. They are still in business as far as I know though. Chances are they have no power like many businesses in this area this morning.

02-02-2011, 01:33 PM	#3
EklipzGSXkid Tri-State Post Whore Join Date: Apr 2007 Location: PA Member #4554 iTrader: (13)	Erik, Thank you for the reply. I did not realize that part of the area was out of power!!

02-02-2011, 01:36 PM	#5
Erik@R/TTuning Former Vendor Join Date: Aug 2010 Member #17281 My Ride: 2000 MR2 Spyder iTrader: (1)	Yeah, TONS of power outages in Bucks. That said I can have a J-pipe and lower in the mail for you pretty quick. $130 plus shipping. This will route a 16G to a stock 2G SMIC.

02-02-2011, 01:47 PM	#6
EklipzGSXkid Tri-State Post Whore Join Date: Apr 2007 Location: PA Member #4554 iTrader: (13)	Erik, I hate to ask, But do you think it would be here by monday? I could order one on ebay for $50, But I honestly do not want to do that and wait any longer. If I had more time I would just do that but the car is not mine and they need it for Monday evening, So I am willing to pay the higher price. I found this one: http://www.extremepsi.com/store/cust...cat=336&page=2 , And was just going to order that but if you can get basically the same one for the same price, I would much rather just order through you being you are a vendor on the site. If you can meet my deadline (sorry, once again), Then I can pm you all of my billing and shipping information! Thank you for posting, I really appreciate it

02-02-2011, 02:08 PM	#7
Erik@R/TTuning Former Vendor Join Date: Aug 2010 Member #17281 My Ride: 2000 MR2 Spyder iTrader: (1)	What area are you from bud? I don't think it would be a problem as long as you aren't outside the tristate area. (I think I can do a little bit better on the price for you too)

02-02-2011, 02:38 PM	#8
EklipzGSXkid Tri-State Post Whore Join Date: Apr 2007 Location: PA Member #4554 iTrader: (13)	I'm in Hazleton PA, 18201. ! If you can check to see if you could do it, When you are ready to take my information please just send me a quick pm with the total and I'll send you all my information (shipping and billing), through PM, And you can get it taken care of. Any help would be greatly appreciated!

02-02-2011, 05:21 PM	#9
Erik@R/TTuning Former Vendor Join Date: Aug 2010 Member #17281 My Ride: 2000 MR2 Spyder iTrader: (1)	PM coming your way!

02-02-2011, 06:04 PM	#11
Erik@R/TTuning Former Vendor Join Date: Aug 2010 Member #17281 My Ride: 2000 MR2 Spyder iTrader: (1)	It feels like old times selling DSM parts Chip. :D

02-03-2011, 02:18 AM	#15
EklipzGSXkid Tri-State Post Whore Join Date: Apr 2007 Location: PA Member #4554 iTrader: (13)	Thank you for the advice!! Erik: I must have just missed you this evening (Around 6pm or a few minutes after). I'll give you a call tomorrow morning so I can get the order placed! this worked out great (Got your pm aswell).

02-03-2011, 11:22 AM	#17
EklipzGSXkid Tri-State Post Whore Join Date: Apr 2007 Location: PA Member #4554 iTrader: (13)	Order placed, Through Erik At r/t. Thank you everyone for the help.

02-03-2011, 11:49 AM	#18
Erik@R/TTuning Former Vendor Join Date: Aug 2010 Member #17281 My Ride: 2000 MR2 Spyder iTrader: (1)	Glad to help you out Rob.