Oct 30 Englishtown Drag Rental pics - TriStateTuners.com :: Home of Tristate Auto Enthusiast

SoStock92 · 10-30-2009, 11:45 PM

My friends in the E36 M3 and E30 325is did very well today. They ran 9.765 @ 154 and 10.9 @ 134 respectively.

Jjaeger240 · 10-30-2009, 11:49 PM

Are chutes required for under 10 second cars?
That e30 is GORGEOUS. Given the look of the rest of the car though, I really wish it didn't have that drag wing on it. Seems like he could drop his times significantly with some more positive rear camber (yeah, I said it).

SoStock92 · 10-30-2009, 11:52 PM

Chutes are required over 150 mph. This was a rental so the chute wasn't pulled today. The E30 is tubbed -I've posted pics before of that. The drank wing goes on that trunk lid, owner has two trunk lids, so its not permanent at all. E30s get real squirrely above 140 mph especially with slicks. The camber is actually positive under neutral, that was the hardest the car was launched today. Wheel slip is non existent even at that camber setup.

**TROLL** · 10-30-2009, 11:54 PM

that e36 is a sleeeeper, aside from the chute of course... thats pretty nuts.
and is the e30 running at full tilt? thats obviously fast so i dont want to take anything away from it, i just know how badass that setup is so i guess i have high expectations.

SoStock92 · 10-30-2009, 11:54 PM

You can see more pics @ http://jonkensy.com/gallery/thumbnails.php?album=42

SoStock92 · 10-30-2009, 11:56 PM

Quote:

Originally Posted by TROLL

that e36 is a sleeeeper, aside from the chute of course... thats pretty nuts.
and is the e30 running at full tilt? thats obviously fast so i dont want to take anything away from it, i just know how badass that setup is so i guess i have high expectations.

Well its the owners first time out with the suspension and all. The first first time we took it out the suspension was real whacky. So its probably a 10.2 maybe 9.99 car as it sits. Remember, its a 3.2L 24v but breathing through a T3 GT35R. I'm really trying to talk him into a larger T4 like mine.

sean3 · 10-31-2009, 12:11 AM

Holy camber gain on the e30! Sick bimmers. The evolution GT500 is pertty neat to

Chopper17 · 10-31-2009, 12:11 AM

Hey, you have any specs on the e30 suspension and traction set up?

SoStock92 · 10-31-2009, 12:13 AM

Quote:

Originally Posted by Chopper17

Hey, you have any specs on the e30 suspension and traction set up?

Yeah its a custom square tube frame tub setup. It uses Q1A coil overs and springs, 4 link full heim joints, dodge viper dana 44 rear diff in a C4 corvette rear carrier w/ custom axles.

Chopper17 · 10-31-2009, 12:36 AM

Good dam, how much did that set him back and did he have a shop do it or did he do it himself?

SoStock92 · 10-31-2009, 12:38 AM

Cost wasnt too bad, we do all of our own work on both his car and mine

Chopper17 · 10-31-2009, 12:43 AM

Alright, does he want to do side work? Because I know traction is going to be a big issue with my e30 and looking for ways to make it work down the road.

**TROLL** · 10-31-2009, 01:11 AM

I know Jay's car which is pictured above and of course Jon's as well... and the work on both of them is top-friggin-notch. Not sure if they are trying to get into anything else or not, but if you're trying to get serious with it and are lucky enough to have them assist, you will absolutely not be disappointed with the results.

Chopper17 · 10-31-2009, 07:02 AM

I just looked at the build pictures and the quality was top notch from what I could see and stuffing something that wasnt even supposed to be made remotely for car a like this in there is amazing and has given me a lot of ideas.

Sled · 10-31-2009, 08:37 AM

154mph!!!!!!!!!!!!!!!!! thats way fast. whats the specs on that car?

JDMTyler3326 · 10-31-2009, 10:51 AM

WOW Crazy ass cars.

boostedfury · 10-31-2009, 11:37 AM

friggin ridiculous rides...soo nasty...and love the gt500 as well..was that by chance Evo performance's?

SoStock92 · 10-31-2009, 01:11 PM

Quote:

Originally Posted by Chopper17

I just looked at the build pictures and the quality was top notch from what I could see and stuffing something that wasnt even supposed to be made remotely for car a like this in there is amazing and has given me a lot of ideas.

Yeah I mean that project took probabout 100+ hrs to finish but was done on weekends and evenings. We've both got other jobs so this is just a hobby on crack. I can ask, but I really doubt he'd want to take it on for the reasons of being time and resource consuming but also from a liability state. We basically cut the back out of the unibody and welded in a new frame haha. Its cool for us because we can look at it and make sure its good and test it and all, but its not something you'd want to just weld in, paint up, and ship it home. It took a lot of time even once the setup was done just tweaking pinion angles and 4 link joints and such.

If you go on E30 Tech its fully documented there you can see what has to be done. Though, you can fit a decent tire in there without doing too much work.

Quote:

Originally Posted by boostedfury

friggin ridiculous rides...soo nasty...and love the gt500 as well..was that by chance Evo performance's?

Yeah those were Evolution Motorsports or Performance cars. We talked to the owner all day in and out, very nice guy. His own car there does 8.7's, they were tweaking customer cars and got them in the 9's lol.

Chopper17 · 10-31-2009, 03:17 PM

Sounds good I understand because that project looks like a lot of work and very well done. I'm going to check on e30 tech and see what is involved because after I get my motor in there I don't think I'm going to really catch traction with 700hp.

SoStock92 · 10-31-2009, 03:18 PM

What motor are you putting in?

10-30-2009, 11:45 PM	#1
SoStock92 Tri-State Post Whore Join Date: Apr 2006 Member #1721 My Ride: 92 BMW 525, 95 BMW 525, 87 BMW 325, 95 BMW 530 iTrader: (0)	Oct 30 Englishtown Drag Rental pics My friends in the E36 M3 and E30 325is did very well today. They ran 9.765 @ 154 and 10.9 @ 134 respectively.

10-31-2009, 12:11 AM	#8
Chopper17 Tri-State Addict Join Date: May 2008 Location: Connecticut Member #7860 My Ride: If it dont smoke black bring it back! iTrader: (0)	Hey, you have any specs on the e30 suspension and traction set up? __________________ Fun Vehicle - Yamaha Warrior 102ci Cobra pipes, Power Commander and Drag Bars Daily Driver for rainy days/winter - 2001 ECLB 6spd 7.3l Flatbed, 4" TB, Edge evo, Dick Cepek 35" MT's, AFE intake Off Road Vehicle - 2011 Polaris Sportsman 550XP Limited Edition in Pearl White

10-31-2009, 12:36 AM	#10
Chopper17 Tri-State Addict Join Date: May 2008 Location: Connecticut Member #7860 My Ride: If it dont smoke black bring it back! iTrader: (0)	Good dam, how much did that set him back and did he have a shop do it or did he do it himself? __________________ Fun Vehicle - Yamaha Warrior 102ci Cobra pipes, Power Commander and Drag Bars Daily Driver for rainy days/winter - 2001 ECLB 6spd 7.3l Flatbed, 4" TB, Edge evo, Dick Cepek 35" MT's, AFE intake Off Road Vehicle - 2011 Polaris Sportsman 550XP Limited Edition in Pearl White

10-31-2009, 12:43 AM	#12
Chopper17 Tri-State Addict Join Date: May 2008 Location: Connecticut Member #7860 My Ride: If it dont smoke black bring it back! iTrader: (0)	Alright, does he want to do side work? Because I know traction is going to be a big issue with my e30 and looking for ways to make it work down the road. __________________ Fun Vehicle - Yamaha Warrior 102ci Cobra pipes, Power Commander and Drag Bars Daily Driver for rainy days/winter - 2001 ECLB 6spd 7.3l Flatbed, 4" TB, Edge evo, Dick Cepek 35" MT's, AFE intake Off Road Vehicle - 2011 Polaris Sportsman 550XP Limited Edition in Pearl White

10-31-2009, 07:02 AM	#14
Chopper17 Tri-State Addict Join Date: May 2008 Location: Connecticut Member #7860 My Ride: If it dont smoke black bring it back! iTrader: (0)	I just looked at the build pictures and the quality was top notch from what I could see and stuffing something that wasnt even supposed to be made remotely for car a like this in there is amazing and has given me a lot of ideas. __________________ Fun Vehicle - Yamaha Warrior 102ci Cobra pipes, Power Commander and Drag Bars Daily Driver for rainy days/winter - 2001 ECLB 6spd 7.3l Flatbed, 4" TB, Edge evo, Dick Cepek 35" MT's, AFE intake Off Road Vehicle - 2011 Polaris Sportsman 550XP Limited Edition in Pearl White

10-30-2009, 11:49 PM	#2
Jjaeger240 Tri-State Addict Join Date: Jan 2007 Location: Baltimore,MD and York,PA Member #3470 My Ride: Nissan S13 iTrader: (0)	Are chutes required for under 10 second cars? That e30 is GORGEOUS. Given the look of the rest of the car though, I really wish it didn't have that drag wing on it. Seems like he could drop his times significantly with some more positive rear camber (yeah, I said it).

10-30-2009, 11:52 PM	#3
SoStock92 Tri-State Post Whore Join Date: Apr 2006 Member #1721 My Ride: 92 BMW 525, 95 BMW 525, 87 BMW 325, 95 BMW 530 iTrader: (0)	Chutes are required over 150 mph. This was a rental so the chute wasn't pulled today. The E30 is tubbed -I've posted pics before of that. The drank wing goes on that trunk lid, owner has two trunk lids, so its not permanent at all. E30s get real squirrely above 140 mph especially with slicks. The camber is actually positive under neutral, that was the hardest the car was launched today. Wheel slip is non existent even at that camber setup.

10-30-2009, 11:54 PM	#5
SoStock92 Tri-State Post Whore Join Date: Apr 2006 Member #1721 My Ride: 92 BMW 525, 95 BMW 525, 87 BMW 325, 95 BMW 530 iTrader: (0)	You can see more pics @ http://jonkensy.com/gallery/thumbnails.php?album=42

10-31-2009, 12:11 AM	#7
sean3 Tri-State Post Whore Join Date: Sep 2007 Location: Cherry Hill, NJ Member #5757 My Ride: 04 Mach 1 iTrader: (0)	Holy camber gain on the e30! Sick bimmers. The evolution GT500 is pertty neat to

10-31-2009, 12:38 AM	#11
SoStock92 Tri-State Post Whore Join Date: Apr 2006 Member #1721 My Ride: 92 BMW 525, 95 BMW 525, 87 BMW 325, 95 BMW 530 iTrader: (0)	Cost wasnt too bad, we do all of our own work on both his car and mine

10-31-2009, 08:37 AM	#15
Sled Tri-State Post Whore Join Date: Feb 2006 Location: Doylestown PA Member #1475 iTrader: (0)	154mph!!!!!!!!!!!!!!!!! thats way fast. whats the specs on that car? __________________ TST's most hated! To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. 05-28-2010 Insubordination (Second-Degree) 05-18-2010 Disrespecting Another Member 08-20-2009 Dodging Swear Filter / Inappropriate lang 01-06-2009 Non-Vendor Advertising

10-31-2009, 10:51 AM	#16
JDMTyler3326 TST Ruined My Life! Join Date: Oct 2008 Location: Around Member #9917 My Ride: ^ iTrader: (0)	WOW Crazy ass cars.

10-31-2009, 11:37 AM	#17
boostedfury Tri-State Post Whore Join Date: Jan 2006 Location: Secane, PA Member #1389 My Ride: 99 Z51 Corvette & 2003 Explorer XLT iTrader: (2)	friggin ridiculous rides...soo nasty...and love the gt500 as well..was that by chance Evo performance's? __________________ Dante's 2005 SRT 4 New Best: 13.10 @110.84mph-11/21/09 ATCO Best Trap: 115.07 mph-11/6/09 Cecil To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

10-31-2009, 03:17 PM	#19
Chopper17 Tri-State Addict Join Date: May 2008 Location: Connecticut Member #7860 My Ride: If it dont smoke black bring it back! iTrader: (0)	Sounds good I understand because that project looks like a lot of work and very well done. I'm going to check on e30 tech and see what is involved because after I get my motor in there I don't think I'm going to really catch traction with 700hp. __________________ Fun Vehicle - Yamaha Warrior 102ci Cobra pipes, Power Commander and Drag Bars Daily Driver for rainy days/winter - 2001 ECLB 6spd 7.3l Flatbed, 4" TB, Edge evo, Dick Cepek 35" MT's, AFE intake Off Road Vehicle - 2011 Polaris Sportsman 550XP Limited Edition in Pearl White

10-31-2009, 03:18 PM	#20
SoStock92 Tri-State Post Whore Join Date: Apr 2006 Member #1721 My Ride: 92 BMW 525, 95 BMW 525, 87 BMW 325, 95 BMW 530 iTrader: (0)	What motor are you putting in?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Redline T/A Englishtown pics	Fujito	Gallery	13	08-31-2009 06:25 PM
GMPT Summer Slam Drag Race & Car Show - June 27th & June 28th, 2009 - Englishtown, NJ	nyce1	Upcoming Events	1	06-14-2009 10:06 PM
6/7/08 Englishtown Road Course Pics	Ciotti	Gallery	1	10-14-2008 03:40 PM
TST's coverage of NOPI Drift/Drag/Show at Atco and Englishtown	TROLL	TST Media Coverage	0	05-15-2008 09:53 AM
Englishtown / Drag-Drift April 18th	ho1ywars	Upcoming Events	2	04-16-2007 09:59 PM