Roll Cage Fabrication service Available... - TriStateTuners.com :: Home of Tristate Auto Enthusiast

Jfaphoenix32 · 12-23-2008, 05:55 AM

We have an experienced roll fabricator on site who can do justa bout anything involving welding, bending and fabricating metal..

Complete services from roll cage modifications, and repairs to fabricating complte custom cages iin street cars...

Call 610-482-0141

Ask for Joe

Phoenix Performance Inc.com

CHAOS · 12-23-2008, 07:45 AM

you might want to talk to TROLL about a vendor spot.

Jfaphoenix32 · 12-23-2008, 07:57 AM

Already did and am signed up!!!

CHAOS · 12-23-2008, 08:01 AM

awesome, glad to see a proper race team on board.

Scapegoat · 12-23-2008, 10:10 AM

hmm... i may be in touch in the future... i'm looking to get a roll cage put in my '69 c10, at the very least to install a couple of harnesses

TurboGSR96 · 12-23-2008, 10:12 AM

I need an 8pt Moly installed in my Integra, I have already pre-fitted the kit and had a new hoop made to my specs, it is going to fit very well for a pre-man. Are you hourly or by the job?

StreetEG · 12-23-2008, 10:23 PM

Can you add a Harness bar to my existing kirk racing cage? Also, if I were to bring my car over would you be able to weld the cage in for me?

Jfaphoenix32 · 12-23-2008, 10:47 PM

PMS sent to all... generally we charge by the hour, but we do issue a firm estimate...

Bestthing to do is stop by and lets us see what needs to be done... Friday is a good day for that!!!

Joe

06 ICYWRX · 12-31-2008, 12:19 AM

Quote:

Originally Posted by StreetEG

Can you add a Harness bar to my existing kirk racing cage? Also, if I were to bring my car over would you be able to weld the cage in for me?

Yes they can do that. Stop by.

KOPhoenix32 · 12-31-2008, 09:14 AM

Hey guys, My name is Kurt and I run/own the Phoenix location up here in Palm. We can install and weld in the cage. We can install the harness bar and do any welding or fabrication work needed. Call me, stop in. I'm here 6 days a week. See some of the cages we have done. The shop is full of some cool cars today, Solstice,350Z,Lotus, Vettes, Firebirds,S2000, all race cars. 215-679-2232

SovXietday · 12-31-2008, 09:49 PM

How much would you guys normally roughly charge for a 6pt chromoly for a 96 Civic Hatch? Might as well give a rough estimate for an 8pt too.

I can't bring the car down as it's trailered for the winter, just pricing around not really 100% ready to pull the trigger yet.

CleanNeon98 · 01-01-2009, 11:45 PM

Would you guys be interested in doing a double diagonal rollbar for an 04 Miata, will have 4 mounting points.

06 ICYWRX · 01-02-2009, 11:24 PM

Call Joe

12-23-2008, 05:55 AM	#1
Jfaphoenix32 Tri-State Training Wheels Join Date: Dec 2008 Location: Phoenixville, Pa. Member #10525 My Ride: 2008 STI iTrader: (0)	Roll Cage Fabrication service Available... We have an experienced roll fabricator on site who can do justa bout anything involving welding, bending and fabricating metal.. Complete services from roll cage modifications, and repairs to fabricating complte custom cages iin street cars... Call 610-482-0141 Ask for Joe Phoenix Performance Inc.com

12-23-2008, 10:12 AM	#6
TurboGSR96 Tri-State Addict Join Date: Oct 2007 Location: DE Member #6026 My Ride: 1996 Integra iTrader: (0)	I need an 8pt Moly installed in my Integra, I have already pre-fitted the kit and had a new hoop made to my specs, it is going to fit very well for a pre-man. Are you hourly or by the job? __________________ 1996 Integra GSR - 585whp/385tq E85 2000 Integra Type-R - Totalled 2005 TSX 6MT - SOLD 2008 TL Type-S - Daily

12-23-2008, 10:23 PM	#7
StreetEG Tri-State Post Whore Join Date: Nov 2005 Member #1109 iTrader: (1)	Can you add a Harness bar to my existing kirk racing cage? Also, if I were to bring my car over would you be able to weld the cage in for me? __________________ EscapetheApple.com 20,000 Miles, No Hotels, Every Amazing Road in America

01-01-2009, 11:45 PM	#12
CleanNeon98 TST Ruined My Life! Join Date: Jun 2006 Location: Philadelphia Member #2029 My Ride: "Honey Badger" Turbo Miata iTrader: (8)	Would you guys be interested in doing a double diagonal rollbar for an 04 Miata, will have 4 mounting points. __________________ 2004 MAZDASPEED MX-5 : 328whp / 308wtq / 2500lbs 2012 Toyota Prius 2 : Daily Driver

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need someone for rust repair and roll cage fabrication	phate1229	[TST] Vendors	5	07-20-2009 09:05 PM
MORE PICS ADDED In House Fabrication, Roll Cages, Tubs, Harness Bars, etc.	gvautosport	(Past Vendors)	12	05-18-2009 10:16 PM
gray sti with roll cage	rmiii28	Spotted!	2	02-09-2008 07:45 PM

12-23-2008, 07:45 AM	#2
CHAOS TST Ruined My Life! Banned Join Date: Jun 2006 Member #2120 My Ride: 1984 Cadillac Brougham iTrader: (1)	you might want to talk to TROLL about a vendor spot.

12-23-2008, 07:57 AM	#3
Jfaphoenix32 Tri-State Training Wheels Join Date: Dec 2008 Location: Phoenixville, Pa. Member #10525 My Ride: 2008 STI iTrader: (0)	Already did and am signed up!!!

12-23-2008, 08:01 AM	#4
CHAOS TST Ruined My Life! Banned Join Date: Jun 2006 Member #2120 My Ride: 1984 Cadillac Brougham iTrader: (1)	awesome, glad to see a proper race team on board.

12-23-2008, 10:10 AM	#5
Scapegoat TST Ruined My Life! Join Date: Dec 2005 Location: stop looking at my gold Member #1208 iTrader: (1)	hmm... i may be in touch in the future... i'm looking to get a roll cage put in my '69 c10, at the very least to install a couple of harnesses

12-23-2008, 10:47 PM	#8
Jfaphoenix32 Tri-State Training Wheels Join Date: Dec 2008 Location: Phoenixville, Pa. Member #10525 My Ride: 2008 STI iTrader: (0)	PMS sent to all... generally we charge by the hour, but we do issue a firm estimate... Bestthing to do is stop by and lets us see what needs to be done... Friday is a good day for that!!! Joe

12-31-2008, 09:14 AM	#10
KOPhoenix32 Tri-State Training Wheels Join Date: Dec 2008 Location: Tylersport PA Member #10541 iTrader: (0)	Hey guys, My name is Kurt and I run/own the Phoenix location up here in Palm. We can install and weld in the cage. We can install the harness bar and do any welding or fabrication work needed. Call me, stop in. I'm here 6 days a week. See some of the cages we have done. The shop is full of some cool cars today, Solstice,350Z,Lotus, Vettes, Firebirds,S2000, all race cars. 215-679-2232

01-02-2009, 11:24 PM	#13
06 ICYWRX Tri-State Aficionado Join Date: Mar 2008 Location: Philly Member #7207 My Ride: 2006 WRX ECUTEK JRZ iTrader: (1)	Call Joe