my new fiero

[i_ride_fieroGT]

well me and 87fierogt have been talkin for the past week and a half on here and came to a deal for both of our cars. in the end we trades my 87 GT for his 87 GT and im more than happy with my new car bringin her home on wed or friday.

[93VR4PA]

looks nice, i rarely ever see one of these anymore that isn't converted into a ferrari or something, ha.

[i_ride_fieroGT]

Originally Posted by 93VR4PA

looks nice, i rarely ever see one of these anymore that isn't converted into a ferrari or something, ha.

im doing a ferrari front bumper and vented side skirts gives it a more updated look but im not goin for the whole kit there fun cars though. piece of history only mass produced mid engine car america ever made besides for the corvare.

[itsmatttt]

Thats looks like its in great condition for an 87. GL with it.

[Vr-4-Life]

what do the full lambo kits go for?

[i_ride_fieroGT]

Originally Posted by Vr-4-Life

what do the full lambo kits go for?

its all ow much you want to spend on them you could do somthin as hidious as this



gas cap is hideous



[/

or you can go and spend between 9000 to 12000 and get somthing that you wouldent be able to tell the diffrence from the outside its all how much you want to spend on it

[i_ride_fieroGT]

or if you want to get real creative a guy and his son made this out of sheet metal using a fiero frame

[ricky2i5]

when was the last time i seen a fiero? nice on a rare-ish find though

[s2k-stig]

Yah good find any plans on what you want to do to it?

[i_ride_fieroGT]

Originally Posted by s2k-stig

Yah good find any plans on what you want to do to it?

i have a set of scooped side skirts pisa taillights kinda like a ferrari style taillight set up and a ferrar 355 noise not lookin to do a whole ferrari kit the parts just have it a more updated look

[gpzjack]

I want to pick one up eventually...cool cars. I saw a ferrari kit on one once that looked great!

[i_ride_fieroGT]

Originally Posted by gpzjack

I want to pick one up eventually...cool cars. I saw a ferrari kit on one once that looked great!

hell you can buy them cheap theres always a $500 fiero laying around somewhere

[87fierogt]

yep this was my car im sad to see it go as it was a white 87 gt 5 speed the exact thing ive wanted since i was a kid my mom bought a black 5 speed 87 gt new still has it with 160k motor still runs its ass off and car looks new i grew up in that car and its older then me. i paid 700 for that car in nov was waitin on the hand controls and found out the hand clutch is more then the car in mint shape so i traded for an auto and later down the road ill be getting my hands on an 88 gt with t tops(very rare) and getting a very nice white paint job layed down and will be getting a small block. if you dig around my moms car has pics up on here. this car needs work, basic stuff brakes(will have good rotors with it my dad had) tune up items as it has been sitting from 06 to 08 when we drove it home without a clutch(only needed the clutch master cyl which i had) less then half a mile and it ran pretty good.

[jjm4life]

^^ hand controlled clutch would be pretty cool. i tried convicing my uncle to do it (quadrapeligic) but he will stick to his auto 300sl.

i can never make up my mind on fieros. do them right and proves us haters wrong haha.

[87fierogt]

oh trust me you'll see just give me some time(120$ a week sucks so bad) the hand clutch is cool check out redisport auto they make em. my short term plans for this car are coil overs all around(about 500$ total) has 230$ a pair konis on all 4 corners already, will be getting fat sway bars(i want go kart like handleing which it will be)ferrari tails molded into one peice instead of two like they come which will be painted ultra flat black, eaither white paint or bright red,a nice set of wheels and hopefully a home made turbo set up for the next year untill i get funds put away. for down the line i wanna build a nice small block chevy(no ls1) starting with eaither a 302 outta a 1st gen camaro or a 327 block(screamer) forged rods and pistons with a big cam ported heads(aluminum later after the motors done and drivable) a cross ram with 2 holly 600 carbs custom headers into 3 inch pipes no mufflers, what ever i can to pull power outta this motor im aiming for between 4 and 425 but be able to rev it out to about 8000rpm(hence why im going with a 302 or 327)

[OMGz Turbo]

You should find a customer service job, a real job. lol i was making 400-500 a week that would make this process a hell alot easier

[87fierogt]

yea true. if you come across anything part time like 330 in the afternoon to whenever ill gladly work 2 jobs i need the money plus im going to apply for socil(sp) securtity in like a week another couple hunderd a week will help. jdub you gonna help me boost this baby?

[93VR4PA]

Originally Posted by i_ride_fieroGT

or if you want to get real creative a guy and his son made this out of sheet metal using a fiero frame

looks like the child of a testarossa and a 50's Cadillac...

[OMGz Turbo]

Originally Posted by 87fierogt

yea true. if you come across anything part time like 330 in the afternoon to whenever ill gladly work 2 jobs i need the money plus im going to apply for socil(sp) securtity in like a week another couple hunderd a week will help. jdub you gonna help me boost this baby?

Yeah dude i told you i would help. Im down fo whatever

[A32 Maxima]

sweet looking fiero