600+whp PSI PRO built/tuned/fabbed STi video - TriStateTuners.com :: Home of Tristate Auto Enthusiast

PSIPROformance · 12-12-2012, 06:18 PM

Here at PSI PROformance we have done a few recent 4-500whp rotated turbo kit Subarus with great results. Some customers just want more, and we are here to make it happen.

We have modified this STi a few different stages since the owner purchased it and after talks of wanting more power he decided on a 600hp goal.

The project began with our custom-spec built/sleeved engine, and our custom rotated turbo kit. With the power goals in mind, a Precision 6262 turbo & E-85 fuel were chosen to make it all come together. With a host of supporting mods & custom built parts done in-house the car easily put down 600 WHEEL horsepower after being tuned on our Dynojet.

We have since installed a resonator to our Race-spec exhaust and the car is happily in the hands of the owner. We are looking forward to it coming back in for a re-tune on higher boost when the owner is ready. At only 29psi the setup is not even breaking a sweat.

Please check us out on facebook to see regularly updates photos from around the shop including the build of this STi. If you have any questions regarding the build, or would like to start a Subaru build of your own please don't hesitate to contact us at the shop. Our number is: 215-361-7100

Thanks, PSI PROformance

VIDEO: http://www.youtube.com/watch?v=izaX6...sXBCcC5pcXk0BE

dastpe · 12-12-2012, 06:50 PM

impressive. great work as always guys.

lownslow95 · 12-12-2012, 07:42 PM

Damn. Noob question, but whats the reasoning behind a rotated turbo?

smelly240 · 12-13-2012, 11:23 AM

The big turbo wont fit under the intake manifold - the stock inlet goes underneath it.

PSIPROformance · 12-13-2012, 06:44 PM

Quote:

Originally Posted by dastpe

impressive. great work as always guys.

Thanks

12-12-2012, 06:18 PM	#1
PSIPROformance Vendor Join Date: Nov 2009 Location: Lansdale Pa Member #15082 iTrader: (0)	600+whp PSI PRO built/tuned/fabbed STi video Here at PSI PROformance we have done a few recent 4-500whp rotated turbo kit Subarus with great results. Some customers just want more, and we are here to make it happen. We have modified this STi a few different stages since the owner purchased it and after talks of wanting more power he decided on a 600hp goal. The project began with our custom-spec built/sleeved engine, and our custom rotated turbo kit. With the power goals in mind, a Precision 6262 turbo & E-85 fuel were chosen to make it all come together. With a host of supporting mods & custom built parts done in-house the car easily put down 600 WHEEL horsepower after being tuned on our Dynojet. We have since installed a resonator to our Race-spec exhaust and the car is happily in the hands of the owner. We are looking forward to it coming back in for a re-tune on higher boost when the owner is ready. At only 29psi the setup is not even breaking a sweat. Please check us out on facebook to see regularly updates photos from around the shop including the build of this STi. If you have any questions regarding the build, or would like to start a Subaru build of your own please don't hesitate to contact us at the shop. Our number is: 215-361-7100 Thanks, PSI PROformance *VIDEO:* http://www.youtube.com/watch?v=izaX6...sXBCcC5pcXk0BE __________________ Dyno Tuning-Engine Swaps-Engine Building-Turbo Kits-Fabrication-General Repairs-State Inspection& Emissions *To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.* To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. \ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. 200 W 5th St (Suite 104) Lansdale PA 19446 215-361-7100 Last edited by PSIPROformance; 12-12-2012 at 06:36 PM.

12-12-2012, 06:50 PM	#2
dastpe Tri-State Aficionado Join Date: May 2012 Location: york, pa Member #23109 My Ride: mazdaspeed3, evo8 iTrader: (0)	impressive. great work as always guys. __________________ 08 ms3: 321whp/362wtq psi tuned 03 evo ate: cbrd built and tuned 05 gsxr 600

12-13-2012, 11:23 AM	#4
smelly240 Tri-State Addict Join Date: Jun 2006 Location: near the big fancy mall Member #2072 My Ride: 1990 Nissan 240 iTrader: (1)	The big turbo wont fit under the intake manifold - the stock inlet goes underneath it. __________________ PSIPROformance.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Brenns TTT Built 2009 Sti with Video Update 1	RayArroyo	(Past Vendors)	10	03-01-2011 10:04 PM
need seat brackets fabbed!	renn	Exterior, Interior, and Electrical	4	12-06-2010 01:52 AM
NEW FMIC fabbed and installed	JNZTuning	Gallery	57	06-07-2008 05:02 PM