D16z6 Map Sensor problem.. - TriStateTuners.com :: Home of Tristate Auto Enthusiast

JDMTyler3326 · 04-12-2012, 10:11 AM

I recently got my crx with a blown head gasket turned out to be blown motor so I swapped another d16z6 into. Same year and same obd. Only problem I have is, I think the old motor was tunned without a map sensor because I can't find it on my harness. My question is you think its safe to block off my map sensor and just get it tuned again?

igo4bmx · 04-12-2012, 11:34 AM

you will need the map sensor hooked up since the stock ecu will need vacuum readings

igo4bmx · 04-12-2012, 11:35 AM

make sure you didn't mix MAP and I think IACV? I forget (its been a while) but I believe those two have the same harness clip design.

JDMTyler3326 · 04-12-2012, 11:25 PM

Quote:

Originally Posted by igo4bmx

make sure you didn't mix MAP and I think IACV? I forget (its been a while) but I believe those two have the same harness clip design.

Is that the IACV the other one on the back of the mani? If so I was thinking about that today and I am gonna check tomorrow.

saxon · 04-13-2012, 10:25 AM

some map sensors for d16z6's were mounted on the firewall (not on the tb)

04-12-2012, 10:11 AM	#1
JDMTyler3326 TST Ruined My Life! Join Date: Oct 2008 Location: Around Member #9917 My Ride: ^ iTrader: (0)	D16z6 Map Sensor problem.. I recently got my crx with a blown head gasket turned out to be blown motor so I swapped another d16z6 into. Same year and same obd. Only problem I have is, I think the old motor was tunned without a map sensor because I can't find it on my harness. My question is you think its safe to block off my map sensor and just get it tuned again?

04-12-2012, 11:34 AM	#2
igo4bmx Tri-State Post Whore Join Date: Jun 2005 Location: Under the bar... Member #592 My Ride: 2009 Audi A3 Quattro, 2008 BMW X5, 2003 WW Evo8, 2000 Turbo SOHC Civic iTrader: (1)	you will need the map sensor hooked up since the stock ecu will need vacuum readings __________________ BOOST doesn't get you laid. Roofies and some creativity does however Tuned by some white dude @ a shopwithbigtrucks.com "You get what you pay for" - thanks captain obvious, unless you bought rotas and received volks.

04-12-2012, 11:35 AM	#3
igo4bmx Tri-State Post Whore Join Date: Jun 2005 Location: Under the bar... Member #592 My Ride: 2009 Audi A3 Quattro, 2008 BMW X5, 2003 WW Evo8, 2000 Turbo SOHC Civic iTrader: (1)	make sure you didn't mix MAP and I think IACV? I forget (its been a while) but I believe those two have the same harness clip design. __________________ BOOST doesn't get you laid. Roofies and some creativity does however Tuned by some white dude @ a shopwithbigtrucks.com "You get what you pay for" - thanks captain obvious, unless you bought rotas and received volks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need help with wiring up MAP sensor and IAT sensor for 2G	sillyeye	Mitsubishi Talk	1	12-05-2008 08:30 PM
GM IAT Sensor and GM 3bar Map sensor?	empera	Extreme PSI	5	11-10-2007 07:25 PM

04-13-2012, 10:25 AM	#5
saxon Tri-State Addict Join Date: Sep 2011 Member #21656 My Ride: 2015 m3 iTrader: (1)	some map sensors for d16z6's were mounted on the firewall (not on the tb)