help?

[integra1128]

does any one know where i would be able to find a set of either red honda tags or red acura i would really like the acura tags any website ya know of would be great thanks

[SovXietday]

Google is your friend. If I remember correctly, I got mine from robearracing, but it was a long time ago.

At any rate, they are retarded expensive and I will never buy another one.

[Foolinaround]

jhpusa
passwordjdm
oemhondaparts websites will have them or oem acura

[integra1128]

thanks do u guys know how long of a belt it is to by pass the a/c

[Foolinaround]

If you want to stop the A/C from working, then just pull the fuse or disconnect the power to the compressor clutch.

[integra1128]

its not that like i cant get it to work the commpresser is shot and squeals really back

[Foolinaround]

Copy pasta tada.

JUST UNBOLT every line for the a/c that you can see it doesn't matter if its there or not..

If I am not mistaken the 1.8's have the same belt system as the 2g. If not disregard this totally. First remove the A/C fan, then remove the radiator. Then loosen the 2 bolts that hold the p/s pump to the engine at the inner part of the engine by the manifold, and at the top by the tensioner part of the p/s pump, then loosen the p/s pump's tension with the tensioner bolt. Then take the belt off the crank, then there are 4 bolts to the a/c take em off... they should be 12 or 10 mm.. theres 2 on the top of it an 2 on the bottom easy.. they are very long.. Then take the belt off. Unplug the ac to ac fan plug on the compressor. and it should come out no problem. If you have still no room it is probably the manifold cover... take that off too.. I have some minor pics of what I removed off my da9 on these forums I think or the 2g one

[integra1128]

thanks dude my fuel pump just went on me today so thats first what do u think of a walbro 255 pump

[Foolinaround]

without a chipped ecu/proper tuning its gonna run like gabage.

also are you sure its the pump and not your main relay?

[integra1128]

like it wont start i had to spray starting fluid into my intake to even get it running how would i know if it was the relay or pump

[integra1128]

what would a good chip be to get

[Foolinaround]

hit your main relay a few times and listen for the fuel pump to whir,if it dosent then its the pump.

Like a chipped ecu with a basemap with the upgraded mods from either xenocron or pherable