engine builders - TriStateTuners.com :: Home of Tristate Auto Enthusiast

MTV2002 · 02-22-2012, 07:46 PM

well the time has come,

i need to know where there are any trusted engine builders in this state. im willing to drive and pay a premium if i need to, but it needs to be done right. ive been hoarding parts here and the time has finally come to pull the trigger. i can build it myself, but i dont have a machine shop required for some of the parts. what would you guys recommend? i dont want some redneck in his back yard putting 15k worth of parts together. i really hate going this route as im very ocd about things and i would rather do it myself, but i have zero time being on call 24/7 and id like to just have it once and done!! i also have a trans that needs torn apart and refreshed with custom gears that i have and need a place to do that as well. i really have not looked into it as im busy and i figure some of you guys would know where i could start looking!!

thanks!! and i cant wait for the summer!!

Matt

importfan21 · 02-22-2012, 07:49 PM

Matt Paxton in Dover (goes to the Dover meets) or Dan (sometimes goes to the northern meets) (http://satoruspeed.com/contact.php)

MTV2002 · 02-22-2012, 08:23 PM

one of these days ill make it to the dover meets!

SikneSS · 02-23-2012, 02:18 PM

i'd recommend those guys too.

btw, i see you ever so often. i'm incognito tho, rocking the "beater" Civic sedan.

MTV2002 · 02-23-2012, 11:27 PM

well i work in edgemoor, seaford, delmar, and harrington so im driving all over the freaking place for work. been racking up miles. i need to get this done quickly because as my daily driver i cant afford to have it down for long. i might have to find myself a beater civic to use while i work on the car.

02-22-2012, 07:46 PM	#1
MTV2002 Tri-State Aficionado Join Date: Apr 2010 Location: Newark DE Member #16201 My Ride: Audi S4 iTrader: (0)	engine builders well the time has come, i need to know where there are any trusted engine builders in this state. im willing to drive and pay a premium if i need to, but it needs to be done right. ive been hoarding parts here and the time has finally come to pull the trigger. i can build it myself, but i dont have a machine shop required for some of the parts. what would you guys recommend? i dont want some redneck in his back yard putting 15k worth of parts together. i really hate going this route as im very ocd about things and i would rather do it myself, but i have zero time being on call 24/7 and id like to just have it once and done!! i also have a trans that needs torn apart and refreshed with custom gears that i have and need a place to do that as well. i really have not looked into it as im busy and i figure some of you guys would know where i could start looking!! thanks!! and i cant wait for the summer!! Matt

02-23-2012, 02:18 PM	#4
SikneSS Tri-State Addict Join Date: Jan 2008 Location: Newark, DE Member #6688 My Ride: 08 Chevy HHR SS iTrader: (1)	i'd recommend those guys too. btw, i see you ever so often. i'm incognito tho, rocking the "beater" Civic sedan. __________________ -11 Civic LX sedan, it's just a daily driver R.I.P. JDK

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Want to Borrow: Engine Leveller (to be used with an engine hoist)	TROLL	Networking: requests and offers	2	10-18-2008 11:02 AM
any tranny builders?	driftingrx5.7	Drivetrain	11	08-09-2007 06:42 PM

02-22-2012, 08:23 PM	#3
MTV2002 Tri-State Aficionado Join Date: Apr 2010 Location: Newark DE Member #16201 My Ride: Audi S4 iTrader: (0)	one of these days ill make it to the dover meets!

02-23-2012, 11:27 PM	#5
MTV2002 Tri-State Aficionado Join Date: Apr 2010 Location: Newark DE Member #16201 My Ride: Audi S4 iTrader: (0)	well i work in edgemoor, seaford, delmar, and harrington so im driving all over the freaking place for work. been racking up miles. i need to get this done quickly because as my daily driver i cant afford to have it down for long. i might have to find myself a beater civic to use while i work on the car.