6 Speed Manual 95 Bonnie Build (Update 8/17)

[95naSTA]

I've owned an n/a 95 Bonneville for 7 out of the past 8 years. I learned a lot of what not to do with my first and made my second much better.

Over the past three years I've done DIY front coilovers, custom rear springs with air assist struts, LS1 front brakes, E39 headlight conversion, shaved a couple things, black onyx 202 paint, new carpet and headliner, and spaced out some Super RSes.

I did cam/heads/headers and pretty much every n/a bolt on (3800 series 2) but the engine is very very tired. It burnt a lot of oil and had poop compression. (wet test confirmed rings)

I had been planning a new n/a build for a while now and it was scheduled to go down this winter. A very nice lady decided to cut infront of me as hard as she could on 95 to apparently avoid and accident a couple weeks ago. This had me trying to squeeze between her and a jersey barrier. I never hit her but I did hook my wheel on the barrier, pop up slam down, poked my hood with my strut, bottomed out my subframe, crack my trans, ruin one of my Super RSes (fml), and scraped my mirror.

So, my build started a little early.

Here's the short list. And keep in mind I know all about how far you can take these engines with a heat gun m90 or a properly sized turbo. I just want to see how far I can take it n/a while still being streetable. hp/$ blows but it's more interesting to me.

05 low mile short block
home made longtubes with upswept 33" long primaries
Abbott racing cam and stage 3 heads milled 0.050"
(these heads have a near perfect I/E flow ratio)
shorter intake runners (HV3)
69mm TB
EWP
roller tip rockers
and some other things..

I rebuilt the trans (4t60-e) with better clutches 3.43s and a shift kit

And I do all my tuning via EFI live and TunerCATs RT. (I'm OBD1.5)

There's going to be a lot of polished/painted/AN stuff going on and I would like to relocate and clean up as much crap in the bay as I can.. In addition to a fresh spray.

When I bought it:


Nowish






95 love



New Set (9/10")


Headers



On the car
http://www.youtube.com/watch?v=xd-yRwWZYLY

Polished crap:
http://picasaweb.google.com/cooneym6...eat=directlink

And the pull

[PunkboySL2]

That's one dope Bonneville. The wheels compliment the car greatly.

[DelayedZ]

That is just downright awesome, haha

[WolfsFang]

Omg the before and after pic is just awesome. love the car and as said before the wheels really bring out the car.

[Int3grA Da9 GsR]

Wow i can honestly say ive never seen someone hook up a bonneville... hands down that car is sexy as hell major props

[lownslow95]

I thought I would never say this about a Bonniville, but goddamn that things sexy.

[Honest_Bob]

hot!!

[jesse096]

In the one pic, I coulda swore it was a BMW at first glance...

Nice Bonnie man, curious as to how much you can get out of her!

-Jesse

[ambitiousCK]

car looks great man, props to a very nice and unique car. Amazed at the before and after photos, keep up the good work and good luck

[Honduh]

Props for doing a motor install on the street.

[95naSTA]

Got a little interweb action:
http://www.stanceiseverything.com/20...tive-thinking/

[856jersey]

Dope just flat out dope.

[Sublime1304]

Now that is something different. Props to you for a unique and different build

[95naSTA]

Thanks.

I got my longtubes back from Jet Hot. 2000* Black.

[milanoej1]

dam ****s sick bro!!!!

[Big_Jim]

Love this car, makes me miss my Bonnie.

[Erik@R/TTuning]

Wow! How much work was involved with the BMW headlight project?

[95naSTA]

They were work.

Added metal and kitty hair to the hood, cut the hood and grill near the inner top of the headlights, epoxied/rivited in front sections of E39 fender (got 2 damaged ones TG), kitty hair over that, built up the bumper corners with more kitty hair and screws to act as rebar, then skim coated it all with bondo.

[Got Insulin?]

That headlight retro looks awesome! Great car all around, good choice on the RSs too.

[DaBombDiggidy]

awesome work!