TriStateTuners.com :: Home of Tristate Auto Enthusiast  

Go Back TriStateTuners.com :: Home of Tristate Auto Enthusiast > Community > Member Journals
Register Rules & Info Mark Forums Read

Notices

Reply
 
Thread Tools Display Modes
Old 09-12-2014, 05:27 PM   #1
blue91lx
Tri-State Post Whore
 
Join Date: Sep 2011
Location: Indianapolis/SE PA
Member #21697

 
iTrader: (0)
Slowly but Surely- 325iX, 325iS, and E30M3 resurrection

I like naming my vehicles after women, specifically those who leave a mark of upstanding character.

Heidi is a cool chic, west coast born and raised, with a clear vision and desire for adventure, but treads with caution and logic; self aware and optimistically realistic.

1988 BMW 325iX

Amidst my last iX build, I started to realize the importance of finding a solid shell to build off of, so, I cut my losses where I was at, sold the red car, and found this gal hiding in eastern Washington. The car is rust free (why I bought it), and was dealer maintained. Not a single light on inside, AC blows cold, clean carfax, etc. The entire car is sound, and I feel it will prove to be a great starting point.

I tend to go overboard with cars, so this time my plans are simple. Clean, aesthetically pleasing OEM+ look, with similar drivetrain aspirations. Suspension refresh, top end refresh, and subtle bolt on mods. Once the gents on this site find an effective solution to tuning ITBs, they're definitely in order. S54 swap in the far future, but for now, the goal is to refresh and enjoy the car.

Now, onto the pictures.

Fresh off the truck- I have some cleaning to do.










And after a quick wash, no wax.











First mod- Euro Grills. The car had headlight covers it's whole life, so the lenses are mint underneath.









And, that's where I left off. Tons more to come; I've been stockpiling parts :p.

Last edited by blue91lx; 05-04-2017 at 08:19 PM.
blue91lx is offline   Reply With Quote
Old 09-12-2014, 08:24 PM   #2
CleanNeon98
TST Ruined My Life!
 
CleanNeon98's Avatar
 
Join Date: Jun 2006
Location: Philadelphia
Member #2029

My Ride:
"Honey Badger" Turbo Miata

iTrader: (8)
Send a message via AIM to CleanNeon98
Clean body, nice pickup.

What's different on the Euro Grilles? All I can notice is one has a smaller opening on the driver's side.
__________________
2004 MAZDASPEED MX-5 : 328whp / 308wtq / 2500lbs
2012 Toyota Prius 2 : Daily Driver
CleanNeon98 is offline   Reply With Quote
Old 09-12-2014, 11:12 PM   #3
yellow2000S/R
Tri-State Post Whore
 
yellow2000S/R's Avatar
 
Join Date: Sep 2006
Location: York, Pa
Member #2462

My Ride:
66 Fairlane, 73 F250, 79 F150, 82 GL500, 96 F250, 98 Wrangler, 04 Hoe, 06 Wrangler, 11 Silverado

iTrader: (2)
Quote:
Originally Posted by CleanNeon98 View Post
Clean body, nice pickup.

What's different on the Euro Grilles? All I can notice is one has a smaller opening on the driver's side.
The top bar is solid instead of being split. It makes the top of the opening flat.

My brother was talking bout your car AWDBOB.
yellow2000S/R is offline   Reply With Quote
Old 09-13-2014, 11:08 AM   #4
blue91lx
Tri-State Post Whore
 
Join Date: Sep 2011
Location: Indianapolis/SE PA
Member #21697

 
iTrader: (0)
Quote:
Originally Posted by CleanNeon98 View Post
Clean body, nice pickup.

What's different on the Euro Grilles? All I can notice is one has a smaller opening on the driver's side.
Thanks, man. He nailed it below on the Euro grills. Top bar is closed so it gives it an 'eyebrow', so to speak.

Quote:
Originally Posted by yellow2000S/R View Post
The top bar is solid instead of being split. It makes the top of the opening flat.

My brother was talking bout your car AWDBOB.
Your brother's car is looking great! I follow his thread over there as well.
blue91lx is offline   Reply With Quote
Old 09-13-2014, 05:49 PM   #5
Shipman
Tri-State Post Whore
 
Shipman's Avatar
 
Join Date: Apr 2011
Location: Maryland
Member #20326

My Ride:
06 STi/08 Legacy/10 Forester

iTrader: (5)
You already know how I feel.

/subscribed
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


Quote:
Not as dead as TST apparently.
Shipman is offline   Reply With Quote
Old 09-14-2014, 09:34 AM   #6
Got Insulin?
Hard Snarker
Super Moderator
 
Got Insulin?'s Avatar
 
Join Date: Apr 2008
Location: Philly
Member #7591

My Ride:
01 Audi TT 225, GVR-4 #72/1000, 91 TSi AWD

iTrader: (16)
Send a message via AIM to Got Insulin?
Quote:
Originally Posted by blue91lx View Post
so this time my plans are simple.
Quote:
Originally Posted by blue91lx View Post
so this time my plans are simple.
Quote:
Originally Posted by blue91lx View Post
so this time my plans are simple.
Quote:
Originally Posted by blue91lx View Post
so this time my plans are simple.
Quote:
Originally Posted by blue91lx View Post
so this time my plans are simple.
Quote:
Originally Posted by blue91lx View Post
so this time my plans are simple.
liessssssssss.
__________________
-Taylor
DenOfDebauchery
Got Insulin? is offline   Reply With Quote
Old 09-14-2014, 10:50 AM   #7
blue91lx
Tri-State Post Whore
 
Join Date: Sep 2011
Location: Indianapolis/SE PA
Member #21697

 
iTrader: (0)
Quote:
Originally Posted by Shipman View Post
You already know how I feel.

/subscribed
Quote:
Originally Posted by Got Insulin? View Post
liessssssssss.
blue91lx is offline   Reply With Quote
Old 09-14-2014, 07:50 PM   #8
blue91lx
Tri-State Post Whore
 
Join Date: Sep 2011
Location: Indianapolis/SE PA
Member #21697

 
iTrader: (0)
Some Sunday fun cleaning her up a bit more and going over the car.

The benefits of purchasing a car from the PNW:

Rear upper strut mounts are minty. Struts, on the other hand, not so hot.



How a battery box should actually look (kind of blew me away).



Was excited to see that someone just did brakes and rotors, and then I saw it was done at the dealer on the Carfax



A little K&N action. Was nice to see a brand new OEM filter in there, though. This car was maintained well, and it shows everywhere.




Spent literally four hours cleaning years of brake dust off of these wheels. There is hardly any paint left on them anyway. More reason to get 6ULs.

Before:



After:






SO, now that I'm digging into the car more, I'm getting a better idea of what needs to be done.

-I found the timing belt sticker, and it was last done in 2004, but only has about 20K on the belt. Needless to say, I have a Gates tbelt and OEM components waiting to go on once I find the time. Cap, rotor, plugs, water pump, tensioner, etc, y'all know the drill.
-I have a spare rear subframe and trailing arms that I'm building, welding in a camber/toe kit, trailing arm bushings, rwd subframe bushings, etc. Going to drop that in and do a diff bushing as well, NOT delrin this time around, I learned my lesson last time.
-The shift linkage needs to be refreshed badly, so I ordered all of those bushings along with a Z3 1.9 setup. Going to try and find an old wood shift knob to compliment the grey interior.
-Need to get some fresh E82 floor mats.
-Purchased a set of 205/55r15 Dunlop DZ102s since Tire Rack had a sale and these tires are dry rotted.
-I will not be building another set of Ground Controls just yet. I'm going to roll around on Billy's/H&Rs for a few years and slowly put together coils.
-It needs a catback. I'm going with the Magnaflow unit.
-Door hinge on the drivers door is sunk into the door. I need to remedy that.
-Passenger Window Motor is shot.
-Hood shock is blown
-New clips for behind the pop outs

Seems like a lot, but really isn't too bad. Once all of that stuff is taken care of and the engine bay is cleaned up, I'm going to start prepping the car for paint!

Until next time!

List of everything purchased so far (these things add up fast):

Euro Grills
M50 Injectors
SSSquid Chip (Stg1)
K&N Drop In
173 ECU
OEM Plugs, Cap, Rotor
Gates Timing Belt
OEM Tensioner
OEM Water Pump and Tstat
OEM Belts
M3 Offset CABs
Z3 1.9 Shifter
E82 Floor Mats
Leather Shift Boot
IE Rear Upper Strut Mounts
IE TA Bushings (street)
IE RWD Subframe Bushings (street)
IE Diff bushing (street)
H&Rs
Bilstein HDs
Dunlop Direzza DZ102s 205/55r15
Garagistic Shift Bushings
ZHP Weighted Knob

Next up:

Magnaflow Catback - $550
IE Long Tubes $620
IE 272 Cam $275
HD Rockers $300
RHD ITBs $1400

Last edited by blue91lx; 09-14-2014 at 09:50 PM.
blue91lx is offline   Reply With Quote
Old 09-21-2014, 05:59 PM   #9
blue91lx
Tri-State Post Whore
 
Join Date: Sep 2011
Location: Indianapolis/SE PA
Member #21697

 
iTrader: (0)
Got a smidge of car time today.

Installed the SSSquid chip (thanks Jesse) and the 173 ECU. Was surprised to see a 380 in there and not a 153. 380 was just a later version of the 173 to my knowledge, so it was replaced at some point?

Chip is a STG1 for 93 octane. Tuned for M50 injectors, gotta install those soon.






Studded snow tires for the winter.



DZ102s for the rest.





Accidentally ordered the wrong color E82 mats. Anyway, here are some fitment pictures for those who are curious.





Car came with a pretty decent MT1 wheel thankfully. I still need to put some serious time into some scrubbing in here.




These came in too!



She's gonna be going under the knife sometime soon. Between still waiting on an IE package, and with it being prime mountain bike season, car time is at an all time low.


Also, this is a pretty cool update. My red iX went to my good friend who was very passionate about continuing the build from where I left off, so I gave him all of the parts I had saved up for it, and he finally finished it all up! Lowering the coils a hair in the front and it's all done. So stoked about how it ended up.


Last edited by blue91lx; 09-21-2014 at 09:49 PM.
blue91lx is offline   Reply With Quote
Old 09-22-2014, 10:51 PM   #10
blue91lx
Tri-State Post Whore
 
Join Date: Sep 2011
Location: Indianapolis/SE PA
Member #21697

 
iTrader: (0)
Alright, lets talk exhaust.

I picked up the Magnaflow 16535 catback, and am going to go with the IE Long Tubes (stage 2, they call them, lolz).

My question for you lies in the midpipe design. My end goal with the car is basically a ported head, IE Billet 272 cam, and ITBs on the stock bottom ended M20.

I want to make sure I'm not going overkill by straight piping and deleting the cat (doing this for power, not sound), so I wanted confirmation on that subject, and also, want to know what diameter piping I should run in the mid pipe for duals. Also, for flow, do I have to cross the mid pipe at any point?

Long tubes have 2.25" open collectors, and the Magnaflow (supposedly) has 2.5" OD piping, before the muffler.

What are your thoughts? I don't want to go overkill and make this all worthless by losing too much backpressure.
blue91lx is offline   Reply With Quote
Old 09-23-2014, 08:20 AM   #11
yellow2000S/R
Tri-State Post Whore
 
yellow2000S/R's Avatar
 
Join Date: Sep 2006
Location: York, Pa
Member #2462

My Ride:
66 Fairlane, 73 F250, 79 F150, 82 GL500, 96 F250, 98 Wrangler, 04 Hoe, 06 Wrangler, 11 Silverado

iTrader: (2)
My brothers car is on stands with exhaust cutoff waiting for me to build him one.

He has used eBay headers and they'll be going to single 2.5" exhaust with hf cat and Vibrant stealth muffler at the back.

He has a billet 272 cam, IE rockers, and I can't remember what springs but he has upgraded lol. 2.7l with the 885 head, swapping an I intake mani on.
yellow2000S/R is offline   Reply With Quote
Old 09-23-2014, 09:05 AM   #12
empera
Tri-State Post Whore
 
empera's Avatar
 
Join Date: Feb 2007
Location: Philly.
Member #3674

My Ride:
67.5 Roadster, 00 Outback, 93.5 Supra tt, 88 Shiro, Tundra, turbo sc300

iTrader: (5)
Send a message via AIM to empera
dang she is nice! happen to want some stock 325e wheels with fresh tires? lol
empera is offline   Reply With Quote
Old 09-23-2014, 04:17 PM   #13
c7scayman
Tri-State Post Whore
 
c7scayman's Avatar
 
Join Date: Oct 2008
Location: Philly
Member #9644

 
iTrader: (0)
In your opinion, is a black 91 318i 5spd MT for $1500 a good deal?
146k miles
Cracked dash
A/C/ broken, but heater works
Power windows work
No rust, but the paint is badly worn. The car is almost dark gray.
Ripped seats. Broken corner amber lights.
Drives fine and no CELs. It handles fine and accelerates well.
__________________
96 Mazda Protege DX 5MT 92HP, 96 ft-lb torque, 2378 lbs. - SOLD! 2005-2012
00 Porsche 986 5MT Est. 230HP, 205 ft-lb torque, 2777 lbs. - DD/Track Car. SOLD! 2010-2014
12 Mazda2 5MT. 100HP of Fury. 2300 lbs. DD/Autox 2015 - Current
13 MK6 GTI 2020 - Current
c7scayman is offline   Reply With Quote
Old 09-23-2014, 05:08 PM   #14
yellow2000S/R
Tri-State Post Whore
 
yellow2000S/R's Avatar
 
Join Date: Sep 2006
Location: York, Pa
Member #2462

My Ride:
66 Fairlane, 73 F250, 79 F150, 82 GL500, 96 F250, 98 Wrangler, 04 Hoe, 06 Wrangler, 11 Silverado

iTrader: (2)
Quote:
Originally Posted by c7scayman View Post
In your opinion, is a black 91 318i 5spd MT for $1500 a good deal?
146k miles
Cracked dash
A/C/ broken, but heater works
Power windows work
No rust, but the paint is badly worn. The car is almost dark gray.
Ripped seats. Broken corner amber lights.
Drives fine and no CELs. It handles fine and accelerates well.
Yup. 30+mpg.
yellow2000S/R is offline   Reply With Quote
Old 09-23-2014, 06:23 PM   #15
blue91lx
Tri-State Post Whore
 
Join Date: Sep 2011
Location: Indianapolis/SE PA
Member #21697

 
iTrader: (0)
Quote:
Originally Posted by yellow2000S/R View Post
My brothers car is on stands with exhaust cutoff waiting for me to build him one.

He has used eBay headers and they'll be going to single 2.5" exhaust with hf cat and Vibrant stealth muffler at the back.

He has a billet 272 cam, IE rockers, and I can't remember what springs but he has upgraded lol. 2.7l with the 885 head, swapping an I intake mani on.
Good to know, thanks. Head setup sounds about exactly where I'm going to be. My catback is dual 2.5", so I think running single before that may not sound the best. I bet his setup sounds great!

Quote:
Originally Posted by empera View Post
dang she is nice! happen to want some stock 325e wheels with fresh tires? lol
Thanks, man! And naaah haha I have my own collection of bottlecaps I can't get rid of.

Quote:
Originally Posted by c7scayman View Post
In your opinion, is a black 91 318i 5spd MT for $1500 a good deal?
146k miles
Cracked dash
A/C/ broken, but heater works
Power windows work
No rust, but the paint is badly worn. The car is almost dark gray.
Ripped seats. Broken corner amber lights.
Drives fine and no CELs. It handles fine and accelerates well.
Quote:
Originally Posted by yellow2000S/R View Post
Yup. 30+mpg.
I'd say it'd be a pretty solid purchase as long as it's not rusty! 4cyl paaawwhhhrrr.
blue91lx is offline   Reply With Quote
Old 09-23-2014, 08:03 PM   #16
yellow2000S/R
Tri-State Post Whore
 
yellow2000S/R's Avatar
 
Join Date: Sep 2006
Location: York, Pa
Member #2462

My Ride:
66 Fairlane, 73 F250, 79 F150, 82 GL500, 96 F250, 98 Wrangler, 04 Hoe, 06 Wrangler, 11 Silverado

iTrader: (2)
The magnaflow catback is only 2.25". The tips are dual 3".

PMing pics of my bros exhaust if you care to see how I just ran it. Waiting for a 2" U bend to come to hack up and make a Y collector for the headers.
yellow2000S/R is offline   Reply With Quote
Old 09-23-2014, 08:24 PM   #17
blue91lx
Tri-State Post Whore
 
Join Date: Sep 2011
Location: Indianapolis/SE PA
Member #21697

 
iTrader: (0)
Quote:
Originally Posted by yellow2000S/R View Post
The magnaflow catback is only 2.25". The tips are dual 3".

PMing pics of my bros exhaust if you care to see how I just ran it. Waiting for a 2" U bend to come to hack up and make a Y collector for the headers.
Finally got a chance to measure tonight, and you're right. The people of the interwebs misinformed me. If you're curious, that 2-1 into the muffler is 2.5", so it shouldn't restrict any flow.

With that said, collectors are 2.25" and the catback is 2.25", so midpipe will just stay dual 2.25".

And yeah, thanks man, I'd definitely like to see how you ran it.
blue91lx is offline   Reply With Quote
Old 09-24-2014, 12:56 AM   #18
Shipman
Tri-State Post Whore
 
Shipman's Avatar
 
Join Date: Apr 2011
Location: Maryland
Member #20326

My Ride:
06 STi/08 Legacy/10 Forester

iTrader: (5)
The old red one looks great, me need
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


Quote:
Not as dead as TST apparently.
Shipman is offline   Reply With Quote
Old 09-24-2014, 08:10 PM   #19
blue91lx
Tri-State Post Whore
 
Join Date: Sep 2011
Location: Indianapolis/SE PA
Member #21697

 
iTrader: (0)
Quote:
Originally Posted by Shipman View Post
The old red one looks great, me need
I know right, I need it back haha.



I put the 173 ECU in with the chip and M50 injectors, and the car starts, struggles to run, and shuts off. Can't even keep it running.

The guy making the chips is a great guy and I've used him plenty of times in the past, but I got 3 faulty chips for the touring, and now this issue, I'm not sure what to think....
blue91lx is offline   Reply With Quote
Old 09-24-2014, 09:46 PM   #20
Shipman
Tri-State Post Whore
 
Shipman's Avatar
 
Join Date: Apr 2011
Location: Maryland
Member #20326

My Ride:
06 STi/08 Legacy/10 Forester

iTrader: (5)
User error...
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


Quote:
Not as dead as TST apparently.
Shipman is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Blue91lx's Budget 97' SC2 Lemons/AutoX Project blue91lx Member Journals 15 12-30-2012 07:57 PM


All times are GMT -4. The time now is 12:13 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.