02 rs 05 wrx rack and pinion - TriStateTuners.com :: Home of Tristate Auto Enthusiast

itwillboost · 01-10-2012, 02:35 PM

The rack and pinion in my 02 rs is shot, and I currently have the motor and trans out of a 05 wrx currently in my car. I figured that means an 05 wrx rack and pinion should fit as well with have a slightly better feel. Does anyone know if these are swappable ?

itwillboost · 01-17-2012, 04:20 AM

Anyone ?

xrturbo · 01-20-2012, 06:40 AM

I am pretty sure it will bolt in but there is a possibility you may need the steering coupler from the WRX too. I know people ran into that issue trying to put them into Legacy's and Foresters but since your car is already close to the same platform as the rack you are installing it may work. It isn't a common swap so this one will probably be one of those moments where you will have to be the test subject.

Honest_Bob · 01-22-2012, 10:18 PM

JFYI an STi rack has a closer ratio. Might as well upgrade if its gotta be replaced right? ;)

itwillboost · 01-22-2012, 10:57 PM

Quote:

Originally Posted by Honest_Bob

JFYI an STi rack has a closer ratio. Might as well upgrade if its gotta be replaced right? ;)

Yea I know, that isn't swappable though with out a new crossmember lol.

05scooby · 02-19-2012, 11:02 PM

I believe if I remember correctly, there are 2 diff racks, both have different mounting setups.

01-10-2012, 02:35 PM	#1
itwillboost Tri-State Post Whore Join Date: Sep 2010 Location: Jersey Member #17521 My Ride: GDE6, L30T iTrader: (1)	02 rs 05 wrx rack and pinion The rack and pinion in my 02 rs is shot, and I currently have the motor and trans out of a 05 wrx currently in my car. I figured that means an 05 wrx rack and pinion should fit as well with have a slightly better feel. Does anyone know if these are swappable ? __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. 5th annual Northeast Nissan Summer Meet

01-17-2012, 04:20 AM	#2
itwillboost Tri-State Post Whore Join Date: Sep 2010 Location: Jersey Member #17521 My Ride: GDE6, L30T iTrader: (1)	Anyone ? __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. 5th annual Northeast Nissan Summer Meet

01-20-2012, 06:40 AM	#3
xrturbo Tri-State Aficionado Join Date: Dec 2006 Location: Allentown Pa Member #3145 My Ride: 98 LGT wag w/wrx driveline swap, lifted 98 Outback, 13 Legacy iTrader: (0)	I am pretty sure it will bolt in but there is a possibility you may need the steering coupler from the WRX too. I know people ran into that issue trying to put them into Legacy's and Foresters but since your car is already close to the same platform as the rack you are installing it may work. It isn't a common swap so this one will probably be one of those moments where you will have to be the test subject. __________________ Subaru owners: Join us on facebook! Lehigh Valley Subaru Enthusiasts

01-22-2012, 10:18 PM	#4
Honest_Bob TST Ruined My Life! Join Date: Dec 2005 Location: Easton, PA Member #1179 My Ride: 05 WRX Wagon iTrader: (2)	JFYI an STi rack has a closer ratio. Might as well upgrade if its gotta be replaced right? ;) __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

02-19-2012, 11:02 PM	#6
05scooby Tri-State Addict Join Date: Sep 2007 Location: Langhorne, PA Member #5723 My Ride: 19 Highlander SE iTrader: (5)	I believe if I remember correctly, there are 2 diff racks, both have different mounting setups. __________________ 05 stg 3 CGM WRX/ sti hybrid SOLD To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. 04 Mercury Marauder - gone but not forgotten 2019 highlander SE 2021 Highlander XLE moon dust

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Replace Pinion Bearing on a Dana 35	grimm	Drivetrain	0	05-02-2011 12:56 PM