Shop recommendation needed for Defi gauges install - TriStateTuners.com :: Home of Tristate Auto Enthusiast

Need4Spd · 03-25-2009, 08:51 PM

Can anyone recommend a shop that will do a nice job installing Defi gauges on an Evo IX? Looking for someone who is reliable and will do a clean install - would prefer that they are familiar with Evos. And no, I don't want to install them myself - i'll screw it up

Thanks

Turbo_CitrusEs · 03-25-2009, 09:31 PM

Where are you located for starters? That would help.

Need4Spd · 03-25-2009, 09:37 PM

Newtown, PA .. need to update my profile. Not worried about traveling to a shop, so don't let my location limit your recommendation

nsn240 · 03-26-2009, 02:46 PM

I'd install them yourself, It's really not bad at all, especially since the only wiring is for the control unit. You can't screw up only a few wires haha

Need4Spd · 03-26-2009, 05:14 PM

I'd love to install them myself... I know I can handle tapping power and ground - and each gauge connects to the other (daisy chain), but I'm more worried about installation of the sensors/lines. If it was my beater, I would give it a shot... Any other thoughts?

**Got Insulin?** · 03-26-2009, 05:17 PM

Quote:

Originally Posted by Need4Spd

I'd love to install them myself... I know I can handle tapping power and ground - and each gauge connects to the other (daisy chain), but I'm more worried about installation of the sensors/lines. If it was my beater, I would give it a shot... Any other thoughts?

Have you googled walkthroughs for the install? Before I bought my Talon, I could barely change the oil, and guages were one of the first things I attacked by myself. It feels daunting, but it's usually very, very simple. Good luck either way.

Vince@R/TTuning · 03-26-2009, 06:57 PM

we have done plenty of gauge install's on Evo's...Give us a call we are about 30 min from Newtown 215 855 5565

SLVRSUBBIEREX · 03-31-2009, 01:27 AM

ill come to you and do it for cheap. pm me if ur interested

03-25-2009, 08:51 PM	#1
Need4Spd Noob-Jersey Join Date: Sep 2006 Location: Bucks, PA Member #2562 iTrader: (0)	Shop recommendation needed for Defi gauges install Can anyone recommend a shop that will do a nice job installing Defi gauges on an Evo IX? Looking for someone who is reliable and will do a clean install - would prefer that they are familiar with Evos. And no, I don't want to install them myself - i'll screw it up Thanks

03-26-2009, 06:57 PM	#7
Vince@R/TTuning Vendor Join Date: Mar 2007 Location: telford Pa Member #3958 My Ride: the one in the back of the shop iTrader: (2)	we have done plenty of gauge install's on Evo's...Give us a call we are about 30 min from Newtown 215 855 5565 __________________ Philadelphia Area's Only Authorized and Factory Trained Pro Tuners for:HONDATA:UPREV:APEXI POWER FC:AEM:COBB:ECUTEK To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Audio shop recommendation for navi install in philly	olmytsi	Exterior, Interior, and Electrical	19	10-03-2009 09:06 PM
Defi BF Imperial, Defi Blue Racer, and AEM Gauges galore!	201Motorsports	(Past Vendors)	1	06-08-2007 03:15 PM
Defi Gauges	KGParts	(Past Vendors)	5	11-02-2005 08:39 AM
Anyone have Defi BF gauges in their car?	alachua	General Car Related Chat	6	05-25-2005 11:19 PM

03-25-2009, 09:37 PM	#3
Need4Spd Noob-Jersey Join Date: Sep 2006 Location: Bucks, PA Member #2562 iTrader: (0)	Newtown, PA .. need to update my profile. Not worried about traveling to a shop, so don't let my location limit your recommendation

03-26-2009, 02:46 PM	#4
nsn240 Tri-State Training Wheels Join Date: Mar 2009 Member #11975 My Ride: nissan iTrader: (0)	I'd install them yourself, It's really not bad at all, especially since the only wiring is for the control unit. You can't screw up only a few wires haha

03-26-2009, 05:14 PM	#5
Need4Spd Noob-Jersey Join Date: Sep 2006 Location: Bucks, PA Member #2562 iTrader: (0)	I'd love to install them myself... I know I can handle tapping power and ground - and each gauge connects to the other (daisy chain), but I'm more worried about installation of the sensors/lines. If it was my beater, I would give it a shot... Any other thoughts?