Fender work - TriStateTuners.com :: Home of Tristate Auto Enthusiast

ambitiousCK · 04-13-2010, 10:15 AM

Hi, i PM'ed you guys but never got a response for i figured id try you guys on the forum. I would like to come to you guys to get my rims fitted on and the fender work done thats needed. Im not sure what will have to be done but i know they'll rub if id try to put them on now. The rims are Works emotion kr-cai 18x9.5 w/ 255/35/18 tires. The car is a 2005 wrx sti and i have BC type BR coilovers. im looking to do this sometime either next month or early the following month. I will also have front fenders that are 10mm wider than stock so that should help some wih fitment. Let me know what you guys think you would have to do and maybe an appoximate cost. Thanks!

RyanG · 04-13-2010, 11:43 AM

CK sorry about them PM's buddy. we are sorting through them as fast as we can

What offset are you planning on running??

ambitiousCK · 04-13-2010, 11:47 AM

Np man just wanted to make sure it wasn't looked over or whatever. And I'm pretty sure it's +38 but I'll double check when I get the tons back from LPC. I heard you guys have done work like this before and good work at that.

06njsti · 04-13-2010, 11:56 AM

you shouldnt need that much work, its an agressive offset but not super agressive and the little bit of "stretch" will help you alot, I dont think you would have needed the +10 mm fenders (seibon's??)either but they wont hurt at all, I ran a 255 on a 9.5 +35 and didnt have any issues. And when your ready to sell those wheels let me know!!! Ive wanted a set of them for soo long, and post some pictures when theyre on the car.

I thought you were getting NT03's?

-Gary

ambitiousCK · 04-13-2010, 12:12 PM

Alright that sounds promising lol and yea I'm going with te seibon cf fenders for acouple of reasons. I do need new fenders, I love cf lol, I like the idea of a little wider stance, and it's unique so I'm fine with spending the money. And I got a great deal from a fellow tst member that I couldn't pass up. And if I ever want to sell them you'll hear from me lol thanks man

RyanG · 04-13-2010, 01:42 PM

With that offset some camber should be all you need. Rear shaving may be needed but can only tell once the wheels are on and a drive has been taken. If she rubs then yes a very very light shave would be done. Honestly I don't thing you will need anything done

ambitiousCK · 04-13-2010, 01:56 PM

Sounds good you'll be hearing from me once my tires are mounted and balanced. Also could you guys corner balance and make them flush?

RyanG · 04-14-2010, 10:34 AM

we don't do alignments or corner balancing buddy

ambitiousCK · 04-14-2010, 10:42 AM

alright man thanks

04-13-2010, 10:15 AM	#1
ambitiousCK Tri-State Post Whore Join Date: Oct 2009 Location: Reading PA Member #14943 My Ride: 2018 Pacifica Limited, 1995 F150, 2015 Hyundai Accent Sport, 06 Corvette Z06 iTrader: (12)	Fender work Hi, i PM'ed you guys but never got a response for i figured id try you guys on the forum. I would like to come to you guys to get my rims fitted on and the fender work done thats needed. Im not sure what will have to be done but i know they'll rub if id try to put them on now. The rims are Works emotion kr-cai 18x9.5 w/ 255/35/18 tires. The car is a 2005 wrx sti and i have BC type BR coilovers. im looking to do this sometime either next month or early the following month. I will also have front fenders that are 10mm wider than stock so that should help some wih fitment. Let me know what you guys think you would have to do and maybe an appoximate cost. Thanks! __________________ Pain is necessary, suffering is optional. *CK* Last edited by ambitiousCK; 04-13-2010 at 10:52 AM.

04-13-2010, 11:43 AM	#2
RyanG Tri-State Post Whore Join Date: Jan 2005 Location: Easton, PA Member #63 iTrader: (1)	CK sorry about them PM's buddy. we are sorting through them as fast as we can What offset are you planning on running?? __________________ I am Area1320 To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

04-13-2010, 11:47 AM	#3
ambitiousCK Tri-State Post Whore Join Date: Oct 2009 Location: Reading PA Member #14943 My Ride: 2018 Pacifica Limited, 1995 F150, 2015 Hyundai Accent Sport, 06 Corvette Z06 iTrader: (12)	Np man just wanted to make sure it wasn't looked over or whatever. And I'm pretty sure it's +38 but I'll double check when I get the tons back from LPC. I heard you guys have done work like this before and good work at that. __________________ Pain is necessary, suffering is optional. *CK*

04-13-2010, 11:56 AM	#4
06njsti Tri-State Addict Join Date: Jul 2007 Member #5392 My Ride: 06 LSB STI awdm'd iTrader: (1)	you shouldnt need that much work, its an agressive offset but not super agressive and the little bit of "stretch" will help you alot, I dont think you would have needed the +10 mm fenders (seibon's??)either but they wont hurt at all, I ran a 255 on a 9.5 +35 and didnt have any issues. And when your ready to sell those wheels let me know!!! Ive wanted a set of them for soo long, and post some pictures when theyre on the car. I thought you were getting NT03's? -Gary __________________ 94 Toyota Tercel...85hp-Gas Sipper!!- 06 Yukon Denali 6.0l on 4's!-Daily Grind- 97 Jeep Grand Cherokee LTD 5.2l -Sold- 06 WRX STi -Weekend Street Monster- 02 Jeep Grand Cherokee LTD 4.7l -Sold-

04-13-2010, 12:12 PM	#5
ambitiousCK Tri-State Post Whore Join Date: Oct 2009 Location: Reading PA Member #14943 My Ride: 2018 Pacifica Limited, 1995 F150, 2015 Hyundai Accent Sport, 06 Corvette Z06 iTrader: (12)	Alright that sounds promising lol and yea I'm going with te seibon cf fenders for acouple of reasons. I do need new fenders, I love cf lol, I like the idea of a little wider stance, and it's unique so I'm fine with spending the money. And I got a great deal from a fellow tst member that I couldn't pass up. And if I ever want to sell them you'll hear from me lol thanks man __________________ Pain is necessary, suffering is optional. *CK*

04-13-2010, 01:42 PM	#6
RyanG Tri-State Post Whore Join Date: Jan 2005 Location: Easton, PA Member #63 iTrader: (1)	With that offset some camber should be all you need. Rear shaving may be needed but can only tell once the wheels are on and a drive has been taken. If she rubs then yes a very very light shave would be done. Honestly I don't thing you will need anything done __________________ I am Area1320 To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

04-13-2010, 01:56 PM	#7
ambitiousCK Tri-State Post Whore Join Date: Oct 2009 Location: Reading PA Member #14943 My Ride: 2018 Pacifica Limited, 1995 F150, 2015 Hyundai Accent Sport, 06 Corvette Z06 iTrader: (12)	Sounds good you'll be hearing from me once my tires are mounted and balanced. Also could you guys corner balance and make them flush? __________________ Pain is necessary, suffering is optional. *CK*

04-14-2010, 10:34 AM	#8
RyanG Tri-State Post Whore Join Date: Jan 2005 Location: Easton, PA Member #63 iTrader: (1)	we don't do alignments or corner balancing buddy __________________ I am Area1320 To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

04-14-2010, 10:42 AM	#9
ambitiousCK Tri-State Post Whore Join Date: Oct 2009 Location: Reading PA Member #14943 My Ride: 2018 Pacifica Limited, 1995 F150, 2015 Hyundai Accent Sport, 06 Corvette Z06 iTrader: (12)	alright man thanks __________________ Pain is necessary, suffering is optional. *CK*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Appt. For fender work	ambitiousCK	(Past Vendors)	3	05-15-2010 12:10 AM
Honda turnsignals. work but they dont work	Teku18	Exterior, Interior, and Electrical	7	12-10-2009 10:38 PM
Body work needed and paint work	i_ride_fieroGT	Networking: requests and offers	3	06-05-2009 02:09 AM