Official BK Meet. Mount Laurel. Tuesday evening.

[Kevin S]

Damn and i thought the stock srt block was beast for holding 500+ Yo JM what u think gt35r looks pretty good in there



guy made 501 - 475 @ 25psi
02 PT 2.4l
SRT pistons and rods/arp bolts
BC 272's springs and retainers
Megasquirt
1000cc injectors
GT35R

[screamingdsm]

Forgot to add one 2g made 1021hp on a unfilled 4g63.

Alex the dude in the second video im pretty sure has the record, 585 on a stock unopened block with 600+ passes on it. gt35r powered.

[TsiBoosted4G63]

Yea Alex is making over 300hp easy his car is faster than mine and I am over 300

[screamingdsm]

srt4 motors are pretty well built from the factory. I was talking to my buddy about them. The way they "break" the end off the bearing side of the rod, and just slap it back together is one of the best ways to do it. Thats how streetbike rods are done, and they rev to 16-19k.

[screamingdsm]

Originally Posted by TsiBoosted4G63

Yea Alex is making over 300hp easy his car is faster than mine and I am over 300

Hes probably making 400hp before the downsize in the downpipe reducer thingamabob. then he makes 271.

[TsiBoosted4G63]

lol you really want him to get that downpipe off you huh

[screamingdsm]

I dont even care if he buys mine (even though its for sale) he just needs one. **** ill make him one 3 inch o2 eliminator downpipe.

[blackvr4]

Originally Posted by screamingdsm

Hes probably making 400hp before the downsize in the downpipe reducer thingamabob. then he makes 271.

hahahah, yo man ill get it! how much u want for it dude? i also have to port my o2 housing, i didnt have a di grinder and a carbide bit so i couldnt port it when i was putting the turbo on, but the outlet on the BEP housing is 2.75 and my o2 housing is 2.5, hopefully when i get ur DP i can take the o2 housing off and take it to someone to get slightly ported, i know thats creating some turbulance in the exhaust flow. I also have to re angle my wastegate dump pipe so i dont melt another coupler hahaha..

[Kevin S]

Originally Posted by screamingdsm

srt4 motors are pretty well built from the factory. I was talking to my buddy about them. The way they "break" the end off the bearing side of the rod, and just slap it back together is one of the best ways to do it. Thats how streetbike rods are done, and they rev to 16-19k.

Yeah cracked rods ftw! pistons arent the greatest though. O well i have a engine good for 1200 hp in my other car for a spare lol, just throw low comp pistons in it and call it a day

[screamingdsm]

Originally Posted by blackvr4

hahahah, yo man ill get it! how much u want for it dude? i also have to port my o2 housing, i didnt have a di grinder and a carbide bit so i couldnt port it when i was putting the turbo on, but the outlet on the BEP housing is 2.75 and my o2 housing is 2.5, hopefully when i get ur DP i can take the o2 housing off and take it to someone to get slightly ported, i know thats creating some turbulance in the exhaust flow. I also have to re angle my wastegate dump pipe so i dont melt another coupler hahaha..

Like i told you 100 bucks for the downpipe, also i can port your ****, I have like 9 carbide bits, and a die grinder. Throw me acouple bucks, and ill get it all gasket matched and turblowlence free!

[blackvr4]

Originally Posted by Kevin S

Yeah cracked rods ftw! pistons arent the greatest though. O well i have a engine good for 1200 hp in my other car for a spare lol, just throw low comp pistons in it and call it a day

in the altima?????!?!?!?!?!?!?!?!!

[blackvr4]

Originally Posted by screamingdsm

Like i told you 100 bucks for the downpipe, also i can port your ****, I have like 9 carbide bits, and a die grinder. Throw me acouple bucks, and ill get it all gasket matched and turblowlence free!

haha sick, aite dude ill have the money real soon, actually, would u be able to bring it to the meet next week? i can just buy it offa u then? this way i can also install my wideband and see if i can get a lil more out of her.

[screamingdsm]

Got ya, i can do that. Bet you turbo spools up ALOT faster. Alex were does that thing start to spool at? And full boost?

[blackvr4]

Originally Posted by screamingdsm

Got ya, i can do that. Bet you turbo spools up ALOT faster.

LOL sold. haha yo i wonder how rich im running. i remember i threw the 780s in awhile back to play with cepa and just did such a rough tune maybe 30mins before the meet just to get it on, and i still havent changed the tune on it. hopefully im running pig rich so i can gain a lil more power from the wideband.

[Kevin S]

Originally Posted by blackvr4

in the altima?????!?!?!?!?!?!?!?!!

No lmao. I have another neon thats been sittin at my house with no engine. I got a forward motion shortblock off a buddy for it thats never been run for basically free. its setup for all motor but could easily be changed with pistons and diffrent cams.

Stratus 2.4 block bored .040 over lightened crank custom aluminum long rods custon 11.5:1 je pistons balanced crane valve springs retainers and crane cams 18 intake 22 exhaust.

got that and drive shaft shop stage 3 axles free both brand new when i bought coilovers

[screamingdsm]

Originally Posted by blackvr4

LOL sold. haha yo i wonder how rich im running. i remember i threw the 780s in awhile back to play with cepa and just did such a rough tune maybe 30mins before the meet just to get it on, and i still havent changed the tune on it. hopefully im running pig rich so i can gain a lil more power from the wideband.

What you running for management in the car right now? Chipped eprom/afc 2/wideband?

[blackvr4]

stock ecu, and just SAFC2

[screamingdsm]

GEEEEEZZZZZ!!! Alex buddy, time to go into top secret mode.

[boostinsidewayz]

Originally Posted by Kevin S

No lmao. I have another neon thats been sittin at my house with no engine. I got a forward motion shortblock off a buddy for it thats never been run for basically free. its setup for all motor but could easily be changed with pistons and diffrent cams.

Stratus 2.4 block bored .040 over lightened crank custom aluminum long rods custon 11.5:1 je pistons balanced crane valve springs retainers and crane cams 18 intake 22 exhaust.

got that and drive shaft shop stage 3 axles free both brand new when i bought coilovers

gay

i'm hopefully getting a moser 12 bolt rear this weekend, then its time for some MT et street radials

and some sick wrinkle walls at the track, some guys can pull a wheel stock with a good rear and slicks, i'm hoping i can get a wheel up

btw

[Chaosweaver]

Originally Posted by s2k

theres the sohc and the dohc n was talking about a stock one. but i knnow thos **** can get really high hp with mods. n 271 is at 6500 rpm stock..

I've heard on a completely stock 4G63, no mods at all, a guy made nearly 350hp with tuning, I've seen vids of an AWD 2G talon running 10s with drop in cams, 50 trim turbo, injectors, fuel pump and a tune on DSMlink.