Any State College Area people?

[knochgoon24]

I haven't had any issues. Most of the crime here is public drunkenness or a small string of thefts over breaks. The car scene is pretty safe.

[FijiBlueFG]

thanks for the info guys. I'm looking forward to being up there next fall.

[Revolution-DC5]

spotted a yellow cr s2k. I didn't mean to run with you, but the kid in the jeep in front of you was being a dick and was talking ****. Good run though.

P.S saw a benz sls in front of infernus, the owner was having fun with the seagull door

[BakaN20]

I see that yellow cr s2k all the time.

Quick question, where do you guys go for detailing around here? I want to get my motorcycle detailed. Thanks!

[TurbosaurusRX]

Revolution, I think I've seen you driving around campus. I know I've seen 1 or 2 loud evos crusing around. I definitely saw that RSX in your avatar driving around on atherton sometime last school year.

I saw that SLS parked out in front of Cafe on St. Patties Day and again driving around on State Patties.

Also baka, I've seen that s2000 around too. I love the sound of that thing. I see in your rides that you have a 350z, do you happen to drive a black one with black wheels?

[Revolution-DC5]

i see the black on black z everyday

[Renegade_]

State college is the **** - the drift house's cars are getting up and running and there will be a bunch of new 240s running around this spring. Got an RB20 and cammed SR running today. If there are a bunch of you guys that want to meet up that are actually chill, I'd def be up for setting something up.

[BakaN20]

My Z is at home, I drive my bmw up at school. Here is a pic of it, I need to get it cleaned and lowered, lol:




I know which one you are talking about though, the one with 5-axis rims right.

[Revolution-DC5]

^clean

[knochgoon24]

Right now, we're still waiting for the weather to clear up.

LPAC Meetings are usually 7pm in the BJC lot when the weather cooperates.
There are also usually weekly meets on the McAllister St parking deck 9:30p Friday nights, again, when the weather cooperates. That one is a little less formal. More like a mini car show.

[terfer]

That SLS was neck-breaking! Anyone know how much tire tread I need to pass PA inspection?

[knochgoon24]

I guess I'm lucky. I work at Team Blue and get to wash all the sweet cars in State College. I can't wait until the weather breaks and all the winter beaters get put away.

I've seen that SLS a few times.

That yellow Lambo that runs around town is pretty sweet. The owner is really chill too.

[TwilightBlueFox]

Originally Posted by terfer

That SLS was neck-breaking! Anyone know how much tire tread I need to pass PA inspection?

I think 3/32nds

[knochgoon24]

If you're questioning it, you probably need new tires.

It's 1/16".

§ 175.80. Inspection procedure.
e.1.i

(1) Inspect the tires and wheels and reject if one or more of the following apply:

(i) A tire has two adjacent treads with less than 2/32-inch tread remaining at any point—less than 4/32-inch tread on the front tires of the vehicles having a gross weight in excess of 10,000 pounds.

(ii) A tire is worn so that the tread wear indicators contact the road in any two adjacent grooves.

(iii) A part of ply or cord is exposed.

(iv) A tire has been repaired with a blow-out patch or boot.

(v) There is a bump, bulge or separation.

(vi) A tire is marked “not for highway use,” “for racing purposes only” or “unsafe for highway use,” or has a similar designation.

(vii) There are other conditions or markings reasonably believed to render the tire unsafe for highway use.

(viii) A tire has been regrooved or recut below the original tread design depth except special taxicab tires which are identified as having extra undertread rubber.

(ix) A tire’s tread extends beyond the outer edge of the wheel housing inclusive of fender flares.

(x) The tires used on the same axle are not the same size or type of construction—bias, belted, radial or snow.

(xi) The wheel nuts or bolts are missing, loose or have improper thread engagement.

(xii) The stud or bolt holes are worn out of round.

(xiii) Part of the wheel is bent, cracked, welded or damaged so as to affect safe operation of vehicle.

(xiv) The rear wheel does not track front wheel in straight ahead position as originally designed.

(xv) The wheel base on one side differs from the wheel base on the other side by more than 1 inch, unless the vehicle’s design specifications indicate different left and right wheel base dimensions.

(xvi) Studded tires are in use after April 15 and before November 1.

(xvii) Retreads are on the front axle of a taxi.

(xviii) The diameter of duals is not within 3/8-inch of each other.

(xix) An axle has missing tires or rims.

(xx) A tire makes contact with the body or chassis.

(xxi) Spacers over 1/4 inch in thickness are used to increase wheel track.

Otherwise, the tire should pass.

[terfer]

Thanks. I ended up passing. It's def on its way out. The guy measured 5/32nd but I doubt it has anything close to that. Probably just passed me for the heck of it.

[maturity]

hey local guy too. just found the thread. anyone know of a sr20 turbo i could buy? dosnt have to be an sr but i would like for it to bolt up. i have a gt28r with a bad oil seal.... lame

[BakaN20]

Originally Posted by Revolution-DC5

^clean

Thanks, its actually pretty dirty in that picture, lol.

[sundaybikes]

anyone seen the blue evo x on te37's? was parked behind the wagner building not too long ago

[TurbosaurusRX]

Yea I saw that evo on college over the weekend. I also saw a red evo 8 on Friday with, I think, a c-west front bumper. I'm trying to recall what it looked like off memory, so I could be completely wrong haha

[Revolution-DC5]

so many evos...