Brandon's Supra Build. #thelittle7mthatcould - Page 2 - TriStateTuners.com :: Home of Tristate Auto Enthusiast

OWENthatsmyname · 07-11-2009, 12:45 PM

looks good. ive always wanted to do a MKIII supra build. those 7M's w/ built up CT26s can put down some really decent power on the cheap

phate1229 · 07-12-2009, 12:12 AM

How big is that in relation to the ct26 in my 4th gen all trac?

BrandonW · 07-12-2009, 11:07 AM

these are two pictures that give a good size difference of the wheel that someone else took, stock vs 57 trim

InvisibleMonkey · 07-13-2009, 12:01 AM

i'd hit it

BrandonW · 07-31-2009, 04:34 PM

so i got some bad news today

machine shop says that my head has cracks in it and is not salvageable

so the build is on a little bit of a hold till i get another one which shouldn't take too long

BrandonW · 08-19-2009, 03:11 PM

ok so i asked driftmotion if they had a 7m-gte head just to see, worst case they wouldn't have one, and what do you know they have one that has been rebuilt and machined to a low ra already for a great price being that its already rebuilt and machined to a low ra (im only playing for the machine work that was done)

only negative is that the shims are mixed up or not put in the correct locations (shoudn't be a big deal at all)

BrandonW · 09-21-2009, 08:48 PM

just a small update i got one of these

cam gear cover

occman · 09-21-2009, 10:24 PM

niice

Nick Merrone · 09-21-2009, 10:28 PM

buy that turbo lol.

BrandonW · 09-21-2009, 10:44 PM

Quote:

Originally Posted by Nick Merrone

buy that turbo lol.

what do you mean?

BrandonW · 10-06-2009, 11:16 AM

a little update:

the head from driftmotion was taken over to the machine shop by my mechanic, i didn't inspect the head since it was packaged pretty well and i didn't want to mess it up or not be able to get it back in the box so i just took it up to the shop that way, turns out there were no shims even in the head, weird (was supposed to be a fully rebuilt head resurfaced and with shims just the shims were mixed up) everything else was good and i probably needed new shims or some from my old head anyway so thats no big deal

machine work that was done and is finished:
decked block
bore and hone 6 cylinders
clean block
balance rotating assembly
polish and clean crank
disassemble head adjust valves, polish cams, clean, ect. and reassemble
r&r core plugs

everything will be back to the shop tomorrow and then reassembly can start

while thats being done im taking a ride over to a place that does powder and ceramic coating to have all my exhaust stuff ceramic coated (driftmotion ceramic coated the hot side of the turbo while doing the 57 trim upgrade)

InvisibleMonkey · 10-06-2009, 07:42 PM

57 trim FTW!

BrandonW · 10-06-2009, 07:50 PM

haha yeah you have one now, and yo you going to englishtown at the end of the month?

BrandonW · 11-18-2009, 07:59 PM

some updates since i haven't updated this in a little

ceramic coating:

my own picture of the cam gear cover:

ra = 8

ra = 23

i had my injectors check out:

hks 2.0mm 86 bore stopper gasket:

InvisibleMonkey · 11-18-2009, 08:03 PM

lol...i'm mad both of our supras are at the shop and we can't drive them until at least the end of december

BrandonW · 11-18-2009, 08:09 PM

lol i know

your is going to take that long though?

everything for mine would be a go but i ordered new oil squirters from toyota and i don't think they are going to come (ive waited two weeks) but someone on sm has 6 new in the bag still, im going to give toyota another week if nothing then either i just use my old ones or get the ones from that sm member

InvisibleMonkey · 11-18-2009, 09:08 PM

well the LSD is gonna be shipped friday and idk what is up with my trans so i just have to wait and see

BrandonW · 01-07-2010, 07:05 PM

update, the shortblock is done and by next week the engine should be ready to be put back in the car

BrandonW · 01-14-2010, 04:27 PM

delivery from driftmotion today and my pillar pod that came from gaugepods.com a week or so ago

maroon 2 gauge pillar pod
intercooler
two 90 degree 2.5" silicone elbows
12 cam cover bolts to replace to oem ones

BrandonW · 01-15-2010, 09:39 PM

i had to take some stuff up to the shop today

oil dipstick o ring
oil filter bracket o ring
oil cooler washer
valve cover #3 the spark plug valley cover
along with the 2 dowel pins from my original cams to use them with the cams on the head i got from driftmotion
and the valve cover bolts i also got from driftmotion

2 pictures i took with my cellphone

07-11-2009, 12:45 PM	#21
OWENthatsmyname Tri-State Addict Join Date: Jan 2005 Location: west chester Member #55 My Ride: . iTrader: (0)	looks good. ive always wanted to do a MKIII supra build. those 7M's w/ built up CT26s can put down some really decent power on the cheap __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

07-12-2009, 11:07 AM	#23
BrandonW Tri-State Addict Join Date: Oct 2008 Location: N.J. Member #9472 My Ride: 1989 Toyota Supra Turbo iTrader: (0)	these are two pictures that give a good size difference of the wheel that someone else took, stock vs 57 trim __________________ my build thread To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Last edited by BrandonW; 08-23-2009 at 02:30 PM.

07-31-2009, 04:34 PM	#25
BrandonW Tri-State Addict Join Date: Oct 2008 Location: N.J. Member #9472 My Ride: 1989 Toyota Supra Turbo iTrader: (0)	so i got some bad news today machine shop says that my head has cracks in it and is not salvageable so the build is on a little bit of a hold till i get another one which shouldn't take too long __________________ my build thread To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

08-19-2009, 03:11 PM	#26
BrandonW Tri-State Addict Join Date: Oct 2008 Location: N.J. Member #9472 My Ride: 1989 Toyota Supra Turbo iTrader: (0)	ok so i asked driftmotion if they had a 7m-gte head just to see, worst case they wouldn't have one, and what do you know they have one that has been rebuilt and machined to a low ra already for a great price being that its already rebuilt and machined to a low ra (im only playing for the machine work that was done) only negative is that the shims are mixed up or not put in the correct locations (shoudn't be a big deal at all) __________________ my build thread To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

09-21-2009, 08:48 PM	#27
BrandonW Tri-State Addict Join Date: Oct 2008 Location: N.J. Member #9472 My Ride: 1989 Toyota Supra Turbo iTrader: (0)	just a small update i got one of these cam gear cover __________________ my build thread To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

09-21-2009, 10:24 PM	#28
occman Tri-State Aficionado Join Date: Jul 2009 Location: lansdale Member #14145 My Ride: G35 // R.I.P AE86 iTrader: (0)	niice

09-21-2009, 10:28 PM	#29
Nick Merrone Tri-State Post Whore Banned Join Date: Feb 2009 Location: philly Member #10807 My Ride: c18det hatch iTrader: (1)	buy that turbo lol.

10-06-2009, 11:16 AM	#31
BrandonW Tri-State Addict Join Date: Oct 2008 Location: N.J. Member #9472 My Ride: 1989 Toyota Supra Turbo iTrader: (0)	a little update: the head from driftmotion was taken over to the machine shop by my mechanic, i didn't inspect the head since it was packaged pretty well and i didn't want to mess it up or not be able to get it back in the box so i just took it up to the shop that way, turns out there were no shims even in the head, weird (was supposed to be a fully rebuilt head resurfaced and with shims just the shims were mixed up) everything else was good and i probably needed new shims or some from my old head anyway so thats no big deal machine work that was done and is finished: decked block bore and hone 6 cylinders clean block balance rotating assembly polish and clean crank disassemble head adjust valves, polish cams, clean, ect. and reassemble r&r core plugs everything will be back to the shop tomorrow and then reassembly can start while thats being done im taking a ride over to a place that does powder and ceramic coating to have all my exhaust stuff ceramic coated (driftmotion ceramic coated the hot side of the turbo while doing the 57 trim upgrade) __________________ my build thread To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

10-06-2009, 07:50 PM	#33
BrandonW Tri-State Addict Join Date: Oct 2008 Location: N.J. Member #9472 My Ride: 1989 Toyota Supra Turbo iTrader: (0)	haha yeah you have one now, and yo you going to englishtown at the end of the month? __________________ my build thread To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

11-18-2009, 07:59 PM	#34
BrandonW Tri-State Addict Join Date: Oct 2008 Location: N.J. Member #9472 My Ride: 1989 Toyota Supra Turbo iTrader: (0)	some updates since i haven't updated this in a little ceramic coating: my own picture of the cam gear cover: ra = 8 ra = 23 i had my injectors check out: hks 2.0mm 86 bore stopper gasket: __________________ my build thread To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

11-18-2009, 08:09 PM	#36
BrandonW Tri-State Addict Join Date: Oct 2008 Location: N.J. Member #9472 My Ride: 1989 Toyota Supra Turbo iTrader: (0)	lol i know your is going to take that long though? everything for mine would be a go but i ordered new oil squirters from toyota and i don't think they are going to come (ive waited two weeks) but someone on sm has 6 new in the bag still, im going to give toyota another week if nothing then either i just use my old ones or get the ones from that sm member __________________ my build thread To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

01-07-2010, 07:05 PM	#38
BrandonW Tri-State Addict Join Date: Oct 2008 Location: N.J. Member #9472 My Ride: 1989 Toyota Supra Turbo iTrader: (0)	update, the shortblock is done and by next week the engine should be ready to be put back in the car __________________ my build thread To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

01-14-2010, 04:27 PM	#39
BrandonW Tri-State Addict Join Date: Oct 2008 Location: N.J. Member #9472 My Ride: 1989 Toyota Supra Turbo iTrader: (0)	delivery from driftmotion today and my pillar pod that came from gaugepods.com a week or so ago maroon 2 gauge pillar pod intercooler two 90 degree 2.5" silicone elbows 12 cam cover bolts to replace to oem ones __________________ my build thread To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

01-15-2010, 09:39 PM	#40
BrandonW Tri-State Addict Join Date: Oct 2008 Location: N.J. Member #9472 My Ride: 1989 Toyota Supra Turbo iTrader: (0)	i had to take some stuff up to the shop today oil dipstick o ring oil filter bracket o ring oil cooler washer valve cover #3 the spark plug valley cover along with the 2 dowel pins from my original cams to use them with the cams on the head i got from driftmotion and the valve cover bolts i also got from driftmotion 2 pictures i took with my cellphone __________________ my build thread To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AJ's American Iron 99 Mustang road race build. Surge tank install	AJ Hartman	Member Journals	204	10-07-2014 08:11 PM
The NO ETA Supra Build - Project "The BLACK"	Supraholic	Member Journals	331	05-29-2014 08:53 PM
Tires2theSky's 93 Supra Build-Up	Tires2theSky	Member Journals	25	12-06-2008 01:04 PM
JNZ 2.4L Evo VIII road race build up	JNZTuning	Gallery	18	06-12-2008 10:47 AM
VWCorradoKid's Supra Build	vwcorradokid	Member Journals	26	03-27-2008 03:25 PM