blouch dominator III...should i take the plunge? - TriStateTuners.com :: Home of Tristate Auto Enthusiast

ianblack06 · 07-28-2007, 01:33 PM

mike at blouch turbo told me 400awhp is obtainable with this turbo and supporting mods. i have catless tbe, 255 lph, blitz sus intake and utec tuned to 20 psi. i will be purchasing an aps dr725 intercooler (too big?) and bigger injectors..what else should i be looking into in order to accomplish my goal?

CHAOS · 07-28-2007, 01:35 PM

that turbo is not a "proven" turbo so youd be one of the first out there making sure it holds up to the claims...

what do you use the car for?

ianblack06 · 07-28-2007, 01:42 PM

it's basically my daily driver. i drive it to work and occasionally to the track..

CHAOS · 07-28-2007, 01:48 PM

when you say track do you mean drag or road course?

Dave · 07-28-2007, 01:52 PM

#1 what are the real specs of the turbo? housing, ar, and wheel type

#2 its funny you say its not a proven turbo since there are only 4 or 5 real manufacturers out there and just about every combination has been tried by now

CHAOS · 07-28-2007, 01:54 PM

Quote:

Originally Posted by Dave

#1 what are the real specs of the turbo? housing, ar, and wheel type

#2 its funny you say its not a proven turbo since there are only 4 or 5 real manufacturers out there and just about every combination has been tried by now

that may be the case, but not every turbo has been proven on every application. this could be an awesome evo turbo but it may suck balls on the sti...

ianblack06 · 07-28-2007, 01:55 PM

drag...and i quote"The WRX/STi Dominator 3.0R features a state-of-the-art 52 lb/min Garrett GT compressor wheel, a high efficiency Garrett GT turbine wheel, Garrett GT full ball bearing system, adjustable upgrade wastegate actuator calibrated at 15 PSI and ported turbine housing capable of delivering 520 HP at boost pressures up to 33 PSI. (Chassis dyno results repeatedly indicate 400+ wheel horsepower and torque easily attainable with the Dominator 3.0R and supporting mods)."

RyanG · 07-28-2007, 02:06 PM

Ian, go with PE850 injectors, as well as a turbo inlet and boost control solenoid. that should be it for that stuff.

ianblack06 · 07-28-2007, 02:18 PM

thanks ryan!

ej20wrx123 · 07-28-2007, 03:25 PM

Quote:

Originally Posted by CHAOS

that may be the case, but not every turbo has been proven on every application. this could be an awesome evo turbo but it may suck balls on the sti...

proven......at least on agiles dyno
http://forums.nasioc.com/forums/show...+dominator+III

http://forums.nasioc.com/forums/show...+dominator+III

Dave · 07-28-2007, 03:27 PM

sounds like its basically a garret GT turbo. those wheels are excellent

CHAOS · 07-28-2007, 03:31 PM

Quote:

Originally Posted by ej20wrx123

proven......at least on agiles dyno
http://forums.nasioc.com/forums/show...+dominator+III

http://forums.nasioc.com/forums/show...+dominator+III

agile's dyno ... at least in my eyes... tends to read high but those are still excellent numbers...

ianblack06 · 07-29-2007, 02:11 AM

am i gonna be the first one with a dominator III with a tune at verocious instead? andy also told me he could make 400 to the wheels with an fp green and supporting mods...this is so frustrating!!

07-28-2007, 02:06 PM	#8
RyanG Tri-State Post Whore Join Date: Jan 2005 Location: Easton, PA Member #63 iTrader: (1)	Ian, go with PE850 injectors, as well as a turbo inlet and boost control solenoid. that should be it for that stuff. __________________ I am Area1320 To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Take the plunge? Into Windows 7 Ultimate that is.	OMGz Turbo	Off-Topic	56	11-26-2020 03:18 PM
About to take the plunge and propose...need help	STiGuy06	Off-Topic	14	10-18-2009 02:56 PM
Dominator Duals Installed	PAFirefighter11	Gallery	2	09-01-2009 10:37 AM
Taking the Subie plunge?	DomZ	New Jersey	96	02-03-2007 01:56 PM

07-28-2007, 01:33 PM	#1
ianblack06 Tri-State Aficionado Join Date: May 2007 Location: easton, PA Member #4631 My Ride: 2006 subaru sti iTrader: (0)	blouch dominator III...should i take the plunge? mike at blouch turbo told me 400awhp is obtainable with this turbo and supporting mods. i have catless tbe, 255 lph, blitz sus intake and utec tuned to 20 psi. i will be purchasing an aps dr725 intercooler (too big?) and bigger injectors..what else should i be looking into in order to accomplish my goal?

07-28-2007, 01:35 PM	#2
CHAOS TST Ruined My Life! Banned Join Date: Jun 2006 Member #2120 My Ride: 1984 Cadillac Brougham iTrader: (1)	that turbo is not a "proven" turbo so youd be one of the first out there making sure it holds up to the claims... what do you use the car for?

07-28-2007, 01:42 PM	#3
ianblack06 Tri-State Aficionado Join Date: May 2007 Location: easton, PA Member #4631 My Ride: 2006 subaru sti iTrader: (0)	it's basically my daily driver. i drive it to work and occasionally to the track..

07-28-2007, 01:48 PM	#4
CHAOS TST Ruined My Life! Banned Join Date: Jun 2006 Member #2120 My Ride: 1984 Cadillac Brougham iTrader: (1)	when you say track do you mean drag or road course?

07-28-2007, 01:52 PM	#5
Dave Tri-State Post Whore Join Date: Jul 2005 Location: Cherry hill, NJ Member #633 My Ride: Shelby Z, ZJ, NSX, CBR954RR, Hawk GT iTrader: (0)	#1 what are the real specs of the turbo? housing, ar, and wheel type #2 its funny you say its not a proven turbo since there are only 4 or 5 real manufacturers out there and just about every combination has been tried by now

07-28-2007, 01:55 PM	#7
ianblack06 Tri-State Aficionado Join Date: May 2007 Location: easton, PA Member #4631 My Ride: 2006 subaru sti iTrader: (0)	drag...and i quote"The WRX/STi Dominator 3.0R features a state-of-the-art 52 lb/min Garrett GT compressor wheel, a high efficiency Garrett GT turbine wheel, Garrett GT full ball bearing system, adjustable upgrade wastegate actuator calibrated at 15 PSI and ported turbine housing capable of delivering 520 HP at boost pressures up to 33 PSI. (Chassis dyno results repeatedly indicate 400+ wheel horsepower and torque easily attainable with the Dominator 3.0R and supporting mods)."

07-28-2007, 02:18 PM	#9
ianblack06 Tri-State Aficionado Join Date: May 2007 Location: easton, PA Member #4631 My Ride: 2006 subaru sti iTrader: (0)	thanks ryan!

07-28-2007, 03:27 PM	#11
Dave Tri-State Post Whore Join Date: Jul 2005 Location: Cherry hill, NJ Member #633 My Ride: Shelby Z, ZJ, NSX, CBR954RR, Hawk GT iTrader: (0)	sounds like its basically a garret GT turbo. those wheels are excellent

07-29-2007, 02:11 AM	#13
ianblack06 Tri-State Aficionado Join Date: May 2007 Location: easton, PA Member #4631 My Ride: 2006 subaru sti iTrader: (0)	am i gonna be the first one with a dominator III with a tune at verocious instead? andy also told me he could make 400 to the wheels with an fp green and supporting mods...this is so frustrating!!