Where to get fog lights installed on an RSX? - TriStateTuners.com :: Home of Tristate Auto Enthusiast

K20sRsxy · 06-10-2010, 11:43 AM

I have fog lights for my 03 type s rsx and I really want them installed asap. Too complicated to do them myself. Takes about an hour or 2. I called a few places and they want to charge me $150 which is nuts.. Any ideas on where to go?

got_tint? · 06-10-2010, 01:09 PM

Well. if you want it done right, paying a GOOD shop to do it isn't a bad idea. Remember they have to wire them in, install a switch for you, which requjires removing what ever panel they are going to install it on.

gotvtec? · 06-10-2010, 02:31 PM

Give em squared a shout
267-861-0675 either ask for mark or mike tell em your from tst

DC2.2GSR · 06-10-2010, 10:15 PM

Quote:

Originally Posted by xImportsx

I have fog lights for my 03 type s rsx and I really want them installed asap. Too complicated to do them myself. Takes about an hour or 2. I called a few places and they want to charge me $150 which is nuts.. Any ideas on where to go?

that means you must pay a premium to have someone else do it for you.

if they're factory fogs, you have to remove the front bumper, remove the stock covers or even drill to fit in some cases, wire them in, install the switch, etc. Then, you have to put it all back together. The current body/paint labor rates are between $46 and $48. 2 hours in labor is $100 alone, and i highly doubt they'll bill out only two hours. plus, every shop i've ever been to charges an extra 20% if you bring your own parts.

go with the $150 or do it yourself.

gotvtec? · 06-10-2010, 11:47 PM

Yea u need to drill out the holes for the fogs. I know 150 is reasonable but i would stil shop around, because i know some shops that would do it for cheaper.

jpalamar · 06-11-2010, 08:34 AM

Your not too far from me. I'm sure we could figure it out in an afternoon along with some beers and something on the grill. As long as you don't gotta cut the bumper, it shouldn't be hard at all.

**Big_Jim** · 06-11-2010, 10:56 AM

^^ dremel ftw. if you need a hand i'd come out for some foglight fury, beer and burger action. lol.

K20sRsxy · 06-12-2010, 12:22 PM

Got them installed

I ended up going to a new body shop. They had to cut into my bumper so it cost me $100. Not bad. They look great... I'll post pics. Thanks for all the ideas. Still up for beer and burgers though.

DPancoast · 06-12-2010, 11:54 PM

give LIP Collision a call. Talk to Josh and tell him Dan Pancoast recommended you.

they do stuff like that and charge a good price!

here is their section on the forums: LIP Collision

phone number 215-699-4442

06-10-2010, 11:43 AM	#1
K20sRsxy Tri-State Aficionado Join Date: Oct 2009 Location: quackertown Member #14990 My Ride: 2003 Acura RSX type-S iTrader: (0)	Where to get fog lights installed on an RSX? I have fog lights for my 03 type s rsx and I really want them installed asap. Too complicated to do them myself. Takes about an hour or 2. I called a few places and they want to charge me $150 which is nuts.. Any ideas on where to go? __________________ formerly xImportsx

06-11-2010, 08:34 AM	#6
jpalamar TST Ruined My Life! Join Date: May 2009 Location: Orefield, PA Member #13773 My Ride: '14 Mustang GT iTrader: (3)	Your not too far from me. I'm sure we could figure it out in an afternoon along with some beers and something on the grill. As long as you don't gotta cut the bumper, it shouldn't be hard at all. __________________ 2014 Mustang GT performance package, M6, Brembo brakes, Torsen diff with 3.73, Steeda CAI with 101mm MAF, ST coilovers with caster/camber plates, BMR lower control arms, BMR watts link, BMW sway bars with end links, front brake cooling ducts, SR short shiffter, and custom tuned Last edited by jpalamar; 06-11-2010 at 10:02 AM.

06-12-2010, 12:22 PM	#8
K20sRsxy Tri-State Aficionado Join Date: Oct 2009 Location: quackertown Member #14990 My Ride: 2003 Acura RSX type-S iTrader: (0)	Got them installed I ended up going to a new body shop. They had to cut into my bumper so it cost me $100. Not bad. They look great... I'll post pics. Thanks for all the ideas. Still up for beer and burgers though. __________________ formerly xImportsx

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Where to get supercharger installed?	ryyiann	General Car Related Chat	40	03-27-2010 02:39 AM
Cam installed on 06 GTO	06Goat	Gallery	39	08-24-2007 12:24 AM
Just installed my pulley	Uberu	Engine Performance	19	05-15-2007 06:48 PM
Officers using lights just to get through red lights and busy intersections...	92dxman	Ask The Law	0	04-05-2007 11:48 PM

06-10-2010, 01:09 PM	#2
got_tint? Former Vendor Join Date: Jun 2010 Member #16652 My Ride: 00 Audi S4 Stg 3 iTrader: (0)	Well. if you want it done right, paying a GOOD shop to do it isn't a bad idea. Remember they have to wire them in, install a switch for you, which requjires removing what ever panel they are going to install it on.