TT 69 Yenko (586ci Twin 88mms)

[HickRocket1258]

It could always be a Yenko clone. I don't think they would do that to a real one.

[Supraholic]

Originally Posted by underpressure02

That pull was only at 10 psi and the car was running pig rich. I am sure that car will make over 2k without a problem.

It is certainly capable. Will it do it? That really depends on the builder and the tuner.

Originally Posted by SoStock92

LOL you can expect to see over 2000 hp out of a 580+ ci motor and twin 47-88's. That was a 10 psi pull... these 47s aren't even thinking about boost at that level. 17 psi spun the hell out of the rollers. That thing is going to be nasty. It sounded like they had too much cut on the 2 step - didn't seem to build much boost but its hard to tell in the video. Need like -40 degrees btdc and cut 8 out of 9 sparks at like 4200 whoooo yeaaaah

Read my comment above. Once I see, I'll be impressed. That was the meaning of my original comment.

[SoStock92]

Originally Posted by Supraholic

Read my comment above. Once I see, I'll be impressed. That was the meaning of my original comment.

I don't get it - the twin $3,000 turbos don't impress you? The 580 ci motor doesn't? Chances are it won't be able to dyno without spinning and will have to be put on an engine dyno to tune it out. There are guys running more than 2200 rwhp out of a 350 SBC and staged nitrous. 2000 hp out of 580 and twin 88's is nothing. You should be impressed now, and blown away when its done.

[underpressure02]

Originally Posted by Supraholic

It is certainly capable. Will it do it? That really depends on the builder and the tuner.

I doubt the tuner really knows what he is doing. Sh!t he could only get 505HP out of my bone stock ls/vtec motor with my turbo setup, and it is not like he is responsible for tuning the fastest car in the world on a powerglide trans either and that is only a sbc with twins.

[denmah]

Originally Posted by underpressure02

I doubt the tuner really knows what he is doing. Sh!t he could only get 505HP out of my bone stock ls/vtec motor with my turbo setup, and it is not like he is responsible for tuning the fastest car in the world on a powerglide trans either and that is only a sbc with twins.

lol.
frank is the man.

[denmah]

Originally Posted by Supraholic

It is certainly capable. Will it do it? That really depends on the builder and the tuner.



Read my comment above. Once I see, I'll be impressed. That was the meaning of my original comment.

jensen engines and frank soldridge.

it'll do it.

[Supraholic]

Ok....


Still not impressed. huge 580 ci motor, even if it does pushes 2200RWHP, still not at awe. That's just me. I'm more impressed with a 122.0 ci pushing 1000+WHP.

It is just an opinion.

[SoStock92]

Originally Posted by Supraholic

Ok....


Still not impressed. huge 580 ci motor, even if it does pushes 2200RWHP, still not at awe. That's just me. I'm more impressed with a 122.0 ci pushing 1000+WHP.

It is just an opinion.

Ok buddy

[ILLJIM69]

Originally Posted by Supraholic

I'm more impressed with a 122.0 ci pushing 1000+WHP.

that run 11s



jim

[Ender81]

I am sure it's a just a Yenko clone, nobody is that stupid. Badass car though, would like to see what it would do at higher boost.

[SoStock92]

Who cares what it can do at higher boost - its murdering the dyno. It'll have to be tuned on an engine dyno or at the strip and even then its hard to get 2000 rwhp through a 10.5w cheater, so its probably going to have to run big tires, and then who knows what it'll run!

[Supraholic]

Originally Posted by ILLJIM69

that run 11s



jim

1000+ WHP = 11s ?????

I will not even grace your incoherent thinking with a reply.

[ReVision]

1000whp is good for a 8 second pass,but.....it really depends on the driver and if the car is setup correctly for drag racing.

[Supraholic]

1000WHP is actually good for low 7s with legal drag cars. There are tons of toyotas running 13b, 4A-GE, and .8 engines just under 1kWHP on low 7s. With illegal vehicles, probably faster.

7.38 http://youtube.com/watch?v=GZUttVX4AS8

7.6 http://youtube.com/watch?v=hTdzmybiGMI&feature=related

These are just two. I have more videos from Atco and e-town. You can also find more on Youtube.