MX931's speed3--blown motor #2 - Page 10 - TriStateTuners.com :: Home of Tristate Auto Enthusiast

morla · 04-27-2011, 11:09 PM

Quote:

Originally Posted by mx931

i plan on getting the wheels on tomorrow and stancing friday.
there 18x9 +30.

awh man super weak. Speed3's can handle 10's with a +9 is the lowest I've seen yet

jnr5005 · 04-27-2011, 11:15 PM

Good to hear its back on the road already. So u had someone clean up your flywheel by hand and just put that with a new clutch disk?

Chefsp0t · 04-27-2011, 11:18 PM

Quote:

Originally Posted by morla

awh man super weak. Speed3's can handle 10's with a +9 is the lowest I've seen yet

Pics? Unless you mean Shaw's red ms3 with white wheels.

mx931 · 04-27-2011, 11:42 PM

yea micky i searched every thread for over a month....have never seen that, im gonna be pokin a good amount as is. i wanna be low too, would be tough to tuck a nice 10 inch wide wheel unless you pull those ****ers out.

and jnr, they sent it out to be resurfaced.

morla · 04-27-2011, 11:44 PM

Quote:

Originally Posted by Chefsp0t

Pics? Unless you mean Shaw's red ms3 with white wheels.

it's definitely not SHaW's, he's running 9.5 +15 if I remember correctly. I'll try to find a picture, I'm almost positive I've seen it before

mx931 · 04-28-2011, 09:49 PM

got some rolling in today thanks to ken (420sx). putting 4 new 225/40s on there saturday, lowering it more. and rolling more. should be set for sonic im super excited.

will put pics up later or you can look on fb if your friends with me

ambitiousCK · 04-28-2011, 11:36 PM

Cars looking great....more pics please =)

jnr5005 · 04-29-2011, 12:07 AM

Quote:

Originally Posted by mx931

yea micky i searched every thread for over a month....have never seen that, im gonna be pokin a good amount as is. i wanna be low too, would be tough to tuck a nice 10 inch wide wheel unless you pull those ****ers out.

and jnr, they sent it out to be resurfaced.

The only reason I asked is because I was told the flywheel couldn't be resurfaced because it would wobble on a lathe it being a dual mass flywheel. That's odd. I guess those who told me that were wrong haha. Sux cause I spent almost $400 on a new flywheel.

Good luck with the build man. Hopefully I will get out to Sonic on Sun. and check out the new rims and stuff.

mx931 · 04-29-2011, 03:31 AM

Quote:

Originally Posted by jnr5005

The only reason I asked is because I was told the flywheel couldn't be resurfaced because it would wobble on a lathe it being a dual mass flywheel. That's odd. I guess those who told me that were wrong haha. Sux cause I spent almost $400 on a new flywheel.

Good luck with the build man. Hopefully I will get out to Sonic on Sun. and check out the new rims and stuff.

deff go man.

btw pickin up a cobb accessport next week

mx931 · 05-01-2011, 12:29 AM

soo i got most of it done, dropped all the way it would go today in front, rears still have to do some more work but its good for sonic.....i cant fit my cellphone not even close.

no rubbing right now. oh and my motor mount snapped off last night smh...it will be at sonic with a bike gonne be in a tent set up feel free to stop and say hi if your followin this, black speed3 with gold wheels!

jtuazon · 05-01-2011, 01:46 AM

Quote:

Originally Posted by mx931

deff go man.

btw pickin up a cobb accessport next week

http://www.mazdaspeedforums.org/foru...example-60321/

mx931 · 05-01-2011, 07:25 PM

if anyone has pics of my car from sonic lemme know. the front is maxed out, havent touched rear.
yes its sorta low imo

gotvtec? · 05-01-2011, 07:47 PM

Quote:

Originally Posted by mx931

if anyone has pics of my car from sonic lemme know. the front is maxed out, havent touched rear.
yes its sorta slow imo

Fixed

mx931 · 05-03-2011, 10:26 PM

so as a lot of you may have seen at sonic, m car is back on the road....and somewhat stanced.

want to thank 420sx and omg (ken and ed) for helpin me with rollin the fenders and gettin it ready. i need to go lower in back back im satisfied.
tonight i picked up my accessport from mario. Im running a stage 1 93 octane tune....spooling at about 3k-6300rpms id say. much better then 3.5k-5600rmps. i love it and am very suprised.

next week im picking up my atp downpipe. then plan on going stage 2 so i should have some major improvements.

mx931 · 05-03-2011, 10:28 PM

other then the dp. im getting all supporting motor mounts and trans mounts. also gonna need brakes and rotors and front ball joints. i can honestly say i love my car more then any car i saw at sonic, besides a few. im doing it right and completely satisfied with the way its coming a long.

mx931 · 05-03-2011, 10:29 PM

Chefsp0t · 05-03-2011, 10:29 PM

What's still left on your BC coilovers? Have you removed any perches or anything? It seems like you should be tucking more tire even without the shorter springs they offer in their extreme drop package.

I highly recommend getting the fenders rolled with an actual roller. They will make it so much smoother and flat than a bat or pvc pipe will do.

Nick Merrone · 05-03-2011, 10:31 PM

get a lip

mx931 · 05-03-2011, 10:34 PM

they are maxed out, im running a 225/40 next week vs the 215/45 i have now. i am trying to maintain the height im at now in the front as it has some form and function imo. borrowing a fender roller sunday and doing it properly.

mx931 · 05-03-2011, 10:35 PM

and nick, as much as i like the lip that the red speed3 had at the meet everyones drewling about, i didnt at the same time. he was running a 9.75 wheel aka lotta poke, but wasnt tucked enough and his lip was him cheating. i am satisfied with the front as it still functions a lot.

04-28-2011, 11:36 PM	#187
ambitiousCK Tri-State Post Whore Join Date: Oct 2009 Location: Reading PA Member #14943 My Ride: 2016 Jaguar F-Type R/2015 Hyundai Accent Sport (6MT)/2023 Chevrolet Traverse LT/2002 Yukon LT iTrader: (12)	Cars looking great....more pics please =) __________________ Pain is necessary, suffering is optional. *CK*

05-03-2011, 10:29 PM	#197
Chefsp0t Tri-State Addict Join Date: Feb 2008 Member #6927 My Ride: A few Mazdas iTrader: (1)	What's still left on your BC coilovers? Have you removed any perches or anything? It seems like you should be tucking more tire even without the shorter springs they offer in their extreme drop package. I highly recommend getting the fenders rolled with an actual roller. They will make it so much smoother and flat than a bat or pvc pipe will do. __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. <-- Click for details

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking at a Mazda Speed3	lownslow95	Mazda Talk	15	09-02-2010 04:13 PM
MTuning's Speed3 - now with more bling	MTuning	Member Journals	92	06-20-2010 07:29 PM
My Mid-Winter Speed3 pix.	09Speed3Z	Gallery	0	02-06-2010 02:37 AM
Blue STI and Black speed3	crazyduckme	Spotted!	0	01-21-2010 10:16 AM
08 wrx vs 08 speed3 vs 08 c30	PoorMan'sR	General Car Related Chat	46	04-26-2008 02:08 PM

04-27-2011, 11:15 PM	#182
jnr5005 Tri-State Addict Join Date: Jul 2009 Location: Hatfield, PA Member #14147 My Ride: '12 Jetta TDI iTrader: (1)	Good to hear its back on the road already. So u had someone clean up your flywheel by hand and just put that with a new clutch disk?

04-27-2011, 11:42 PM	#184
mx931 Tri-State Post Whore Banned Join Date: Jan 2010 Location: 215 Member #15403 My Ride: jdm nissan, looking for bike! iTrader: (0)	yea micky i searched every thread for over a month....have never seen that, im gonna be pokin a good amount as is. i wanna be low too, would be tough to tuck a nice 10 inch wide wheel unless you pull those ****ers out. and jnr, they sent it out to be resurfaced.

04-28-2011, 09:49 PM	#186
mx931 Tri-State Post Whore Banned Join Date: Jan 2010 Location: 215 Member #15403 My Ride: jdm nissan, looking for bike! iTrader: (0)	got some rolling in today thanks to ken (420sx). putting 4 new 225/40s on there saturday, lowering it more. and rolling more. should be set for sonic im super excited. will put pics up later or you can look on fb if your friends with me

05-01-2011, 12:29 AM	#190
mx931 Tri-State Post Whore Banned Join Date: Jan 2010 Location: 215 Member #15403 My Ride: jdm nissan, looking for bike! iTrader: (0)	soo i got most of it done, dropped all the way it would go today in front, rears still have to do some more work but its good for sonic.....i cant fit my cellphone not even close. no rubbing right now. oh and my motor mount snapped off last night smh...it will be at sonic with a bike gonne be in a tent set up feel free to stop and say hi if your followin this, black speed3 with gold wheels!

05-01-2011, 07:25 PM	#192
mx931 Tri-State Post Whore Banned Join Date: Jan 2010 Location: 215 Member #15403 My Ride: jdm nissan, looking for bike! iTrader: (0)	if anyone has pics of my car from sonic lemme know. the front is maxed out, havent touched rear. yes its sorta low imo

05-03-2011, 10:26 PM	#194
mx931 Tri-State Post Whore Banned Join Date: Jan 2010 Location: 215 Member #15403 My Ride: jdm nissan, looking for bike! iTrader: (0)	so as a lot of you may have seen at sonic, m car is back on the road....and somewhat stanced. want to thank 420sx and omg (ken and ed) for helpin me with rollin the fenders and gettin it ready. i need to go lower in back back im satisfied. tonight i picked up my accessport from mario. Im running a stage 1 93 octane tune....spooling at about 3k-6300rpms id say. much better then 3.5k-5600rmps. i love it and am very suprised. next week im picking up my atp downpipe. then plan on going stage 2 so i should have some major improvements.

05-03-2011, 10:28 PM	#195
mx931 Tri-State Post Whore Banned Join Date: Jan 2010 Location: 215 Member #15403 My Ride: jdm nissan, looking for bike! iTrader: (0)	other then the dp. im getting all supporting motor mounts and trans mounts. also gonna need brakes and rotors and front ball joints. i can honestly say i love my car more then any car i saw at sonic, besides a few. im doing it right and completely satisfied with the way its coming a long.

05-03-2011, 10:29 PM	#196
mx931 Tri-State Post Whore Banned Join Date: Jan 2010 Location: 215 Member #15403 My Ride: jdm nissan, looking for bike! iTrader: (0)

05-03-2011, 10:31 PM	#198
Nick Merrone Tri-State Post Whore Banned Join Date: Feb 2009 Location: philly Member #10807 My Ride: c18det hatch iTrader: (1)	get a lip

05-03-2011, 10:34 PM	#199
mx931 Tri-State Post Whore Banned Join Date: Jan 2010 Location: 215 Member #15403 My Ride: jdm nissan, looking for bike! iTrader: (0)	they are maxed out, im running a 225/40 next week vs the 215/45 i have now. i am trying to maintain the height im at now in the front as it has some form and function imo. borrowing a fender roller sunday and doing it properly.

05-03-2011, 10:35 PM	#200
mx931 Tri-State Post Whore Banned Join Date: Jan 2010 Location: 215 Member #15403 My Ride: jdm nissan, looking for bike! iTrader: (0)	and nick, as much as i like the lip that the red speed3 had at the meet everyones drewling about, i didnt at the same time. he was running a 9.75 wheel aka lotta poke, but wasnt tucked enough and his lip was him cheating. i am satisfied with the front as it still functions a lot.