Needed: Vendor that ceramic coats down pipes, headers, up-pipe etc. Also polishing! - TriStateTuners.com :: Home of Tristate Auto Enthusiast

D Money · 08-08-2008, 02:38 PM

Looking for possibly a TST vendor or any vendor for that matter that can ceramic coat (shinny silver) a down pipe, header, up pipe, etc. I also need the hotside of the turbo ceramic coated as well as the compressor housing polished.

Any help would be great!

alwaysinboost · 08-08-2008, 02:47 PM

JNZ Finishing in Hatfield can take care of all that for ya.

D Money · 08-08-2008, 02:55 PM

really? the jnz from here, correct?

Nors · 08-08-2008, 03:04 PM

Yes JNZ is a vendor here AFAIK. Why would you post this topic in this section?

D Money · 08-08-2008, 03:05 PM

i dont know, im new here so relax.

TurboTagTeam · 08-08-2008, 03:58 PM

Don't ceramic coat your header/up-pipe. It'll flake off with-in a year. Get that shiat Swain-tech coated. Works WAY better.

Lady4Banger · 08-08-2008, 04:11 PM

BoneHead Performance also Cermaic Coats as well....

I also heard that Jet Hot 2000 coating works well.

D Money · 08-08-2008, 04:14 PM

Quote:

Originally Posted by TurboTagTeam

Don't ceramic coat your header/up-pipe. It'll flake off with-in a year. Get that shiat Swain-tech coated. Works WAY better.

I think i meant jet hot or some **** like that.

Quote:

Originally Posted by Lady4Banger

BoneHead Performance also Cermaic Coats as well....

I also heard that Jet Hot 2000 coating works well.

yeah jet hot! They make a shinny finish. Wheres that at.

CarbonIS · 08-08-2008, 08:22 PM

LPC does ceramic coats.....

Lady4Banger · 08-09-2008, 02:54 AM

Quote:

Originally Posted by CarbonIS

LPC does ceramic coats.....

Really? I asked in the vendor forum I was hoping they would. I didn't see a price list for that stuff.

LPC · 08-09-2008, 04:26 AM

Quote:

Originally Posted by subwrxkid

Looking for possibly a TST vendor or any vendor for that matter that can ceramic coat (shinny silver) a down pipe, header, up pipe, etc. I also need the hotside of the turbo ceramic coated as well as the compressor housing polished.

Any help would be great!

I dont know why a car thats is sponsored by me would go asking asking a question like this without asking me first but oh well.

but heres your answer
jnz finishing
boneheads
and myself all do ceramic coatings. I use Cerakote High Temperature Coatings.
ceramic coating does cost alot more since its not that cheap in buying the supplies that we need.

Vr-4-Life · 08-09-2008, 11:25 AM

all dont coat the hot side.. put a turbo bag over it and call it a day.. functional and it looks better.

D Money · 08-10-2008, 10:01 AM

Quote:

Originally Posted by LPC

I dont know why a car thats is sponsored by me would go asking asking a question like this without asking me first but oh well.

but heres your answer
jnz finishing
boneheads
and myself all do ceramic coatings. I use Cerakote High Temperature Coatings.
ceramic coating does cost alot more since its not that cheap in buying the supplies that we need.

Woah, I didn't know that you did the polishing or ceramic coating or else this thread would have never been even made and you know that Martin!

I'll pm you!

Rev. Maynard · 08-10-2008, 10:08 AM

Yes we do ceramic in house. 2K deg gloss black and 1600deg chrome. When ceramic flakes off its because only the outside of the part was done, you need to do the inside as well or else you might as well paint the header because it will come off eventually.

D Money · 08-10-2008, 10:29 AM

I don't need the header done any longer, im buying a new one and just heat wrapping it.

I wrote a pm to Martin about the up pipe and down pipe. Thanks everyone.

CarbonIS · 08-10-2008, 03:47 PM

what one are you buying?

D Money · 08-10-2008, 03:53 PM

Idk....

08-08-2008, 03:04 PM	#4
Nors Tri-State Post Whore Join Date: Jul 2006 Location: DelCo, PA Member #2210 My Ride: 2011 VW GTI iTrader: (1)	Yes JNZ is a vendor here AFAIK. Why would you post this topic in this section? __________________ DUB JAWN Hi Hater™ Previous: 2002 Volkswagen GTi - Sold \|1995 Honda Accord - Sold \| 1993 Eagle Talon Tsi AWD Project - Sold \| 1996 Acura Integra RS - Sold

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ceramic coating needed!	igo4bmx	[TST] Vendors	0	05-22-2006 01:40 PM

08-08-2008, 02:47 PM	#2
alwaysinboost Tri-State Post Whore Join Date: Feb 2006 Location: still at work Member #1454 My Ride: 04 EVO Wrecked by Oakes Detailing iTrader: (0)	JNZ Finishing in Hatfield can take care of all that for ya.

08-08-2008, 03:58 PM	#6
TurboTagTeam Tri-State Post Whore Banned Join Date: Mar 2005 Location: Cell Block F Member #275 My Ride: constantly changes iTrader: (2)	Don't ceramic coat your header/up-pipe. It'll flake off with-in a year. Get that shiat Swain-tech coated. Works WAY better.

08-08-2008, 04:11 PM	#7
Lady4Banger Noob-Jersey Banned Join Date: Jun 2008 Location: Wherever I'm Standing Member #7928 My Ride: 1994 Integra LS iTrader: (0)	BoneHead Performance also Cermaic Coats as well.... I also heard that Jet Hot 2000 coating works well.

08-09-2008, 11:25 AM	#12
Vr-4-Life Tri-State Post Whore Join Date: May 2006 Location: Philly PA Member #1961 My Ride: BMW E60 M5 V10 6 Speed --- Ducati Monster 696 iTrader: (4)	all dont coat the hot side.. put a turbo bag over it and call it a day.. functional and it looks better.

08-10-2008, 10:08 AM	#14
Rev. Maynard Tri-State Aficionado Join Date: Jun 2005 Location: Lansdale Member #578 My Ride: 92 BMW E34 iTrader: (1)	Yes we do ceramic in house. 2K deg gloss black and 1600deg chrome. When ceramic flakes off its because only the outside of the part was done, you need to do the inside as well or else you might as well paint the header because it will come off eventually.