You got a customer for life!! - TriStateTuners.com :: Home of Tristate Auto Enthusiast

civictype_r · 12-23-2011, 04:53 PM

Well it all started when I blew my turbo on Saturday night 11/19/2011. I didnt feel like doing the work in my driveway in the cold. Also have to many other thing going on like moving. So Monday morning I got called PSI PROformance and talked to Steve for like 45 minutes about all my ideas I had. Different turbos and a new tune were definitely needed! We decided on a Percision Turbo SC5252E and a cast manifold again. They got the turbo and new manifold on order! Then to find out that the turbo was on backorder a few days later. They also gave me there cell numbers and kept me up to date on everything they did. Steve even took pics and sent them to me of there work! After a week Precision Turbo shipped out the new turbo. So they got to work pulling all the old parts off my motor and started the rebuild only to find out that treadstone changed where the turbo mounts on their cast manifold. So my old intake and downpipe were useless. Thats ok seeing that Travis is a awesome fabractor and made me a new 3 inch intake and a 2.5 inch stainless downpipe with a V-band clamp at the turbo. Also installed a Y pipe on the downpipe for the QTP E-cutout! While Travis was busy welding Steve started to clean my bay up a little bit. He wrapped my engine harness and tucked a bunch of hoses and wires. After they finshed the install it was time to strap it to the rollers and make some power! Something I have been waiting for since my last tune that made my car run like crap! Steve's turn to work his magic on his laptop! Steve did a few pulls at 7psi and the car ripped it made 267whp and 228wtq. Then I wanted more. So he cranked the boost up to 9.5psi and made a few more pulls and made an impressive 301whp and 250wtq. Steve definitely got me to the 300whp mark I wanted to see! In the end I made a few new friends and more power with a smaller turbo and less pounds of boost and it has a smooth power curve.

New setup!!

New down pipe with V-band clamp to Turbo and Y pipe for the E-cutout.

New manifold

Precision Turbo SC5252E

On the dyno!

Stainless 2.5 down pipe

12-23-2011, 04:53 PM	#1
civictype_r Tri-State Addict Join Date: Jan 2007 Member #3449 My Ride: 2004 Civic Si iTrader: (1)	You got a customer for life!! Well it all started when I blew my turbo on Saturday night 11/19/2011. I didnt feel like doing the work in my driveway in the cold. Also have to many other thing going on like moving. So Monday morning I got called PSI PROformance and talked to Steve for like 45 minutes about all my ideas I had. Different turbos and a new tune were definitely needed! We decided on a Percision Turbo SC5252E and a cast manifold again. They got the turbo and new manifold on order! Then to find out that the turbo was on backorder a few days later. They also gave me there cell numbers and kept me up to date on everything they did. Steve even took pics and sent them to me of there work! After a week Precision Turbo shipped out the new turbo. So they got to work pulling all the old parts off my motor and started the rebuild only to find out that treadstone changed where the turbo mounts on their cast manifold. So my old intake and downpipe were useless. Thats ok seeing that Travis is a awesome fabractor and made me a new 3 inch intake and a 2.5 inch stainless downpipe with a V-band clamp at the turbo. Also installed a Y pipe on the downpipe for the QTP E-cutout! While Travis was busy welding Steve started to clean my bay up a little bit. He wrapped my engine harness and tucked a bunch of hoses and wires. After they finshed the install it was time to strap it to the rollers and make some power! Something I have been waiting for since my last tune that made my car run like crap! Steve's turn to work his magic on his laptop! Steve did a few pulls at 7psi and the car ripped it made 267whp and 228wtq. Then I wanted more. So he cranked the boost up to 9.5psi and made a few more pulls and made an impressive 301whp and 250wtq. Steve definitely got me to the 300whp mark I wanted to see! In the end I made a few new friends and more power with a smaller turbo and less pounds of boost and it has a smooth power curve. New setup!! New down pipe with V-band clamp to Turbo and Y pipe for the E-cutout. New manifold Precision Turbo SC5252E On the dyno! Stainless 2.5 down pipe __________________ 2004 Civic Si - 301whp 250wtq @ 9.5psi PSI PROformance Tuned To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. / To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. / To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Last edited by civictype_r; 03-04-2013 at 11:00 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
yet Another happy customer	Vr-4-Life	Shades of Gray Window Tinting	7	01-06-2009 01:53 PM
Another satisfied customer from Ray!	pearl	(Past Vendors)	0	02-04-2008 11:23 AM
Hey another happy customer!	Buster	(Past Vendors)	1	06-26-2007 08:54 AM
Another satisfied customer	CleanNeon98	Shades of Gray Window Tinting	1	04-25-2007 10:42 PM