motor is in (kind of)....i still have to drill out the hole a little bit more on the pass. side for the motor mount. i am going to be using threaded rod with 2 washers and 2 nuts for the mount. my problem is that under the frame it has a little bit of a lip to it and you cant fit a washer on there, so i have to grind it down so the washer will fit flush. i just droped the crossmember and hopefully i can sneak the motor in a little better now..the trans was hitting the steering rack and the crank pully was hitting the frame which was f-in everything up. now that i have a little more room to work with i can drop the motor all the way down then pull it back up into place. it looks like its gonna rain here tonight and maybe into tomorrow so im trying to get this thing bolted up asap so i can push it back under the car port. i'll keep it updated
(when your motor is hangin from a riged ass set-up and your under there workin, you want some insurance, hence the board) just so i dont get any dumb questions ;)
04-15-2009, 02:42 PM
Similar Threads
Threaded Mode